Attack Phenomen, x64!
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
Thanks Xenos,
nice pickup.
It was just a naming thing, both were called key.
It's fixed now in the first post.
Maybe I'll set the filters up to run serial,
will think on it.
No hurry for the patches, ty.
Cheers
nice pickup.
It was just a naming thing, both were called key.
It's fixed now in the first post.
Maybe I'll set the filters up to run serial,
will think on it.
No hurry for the patches, ty.
Cheers
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
yo,
It's funny you know,
I seem to spend 10s of hours building these plugs,
and don't play with them as much as building,
gotta make some new less rent tunes soon with mine and one dev that springs to mind, is Contralogic's ware.
So I just put in another 2 hours in Orion with OMEN, and found no problems. Prior to this session I had found a linking prob with LFO 2&3. That's fixed in the first post. It sounds really digital IMO, some cool sounds coming out of it. It's fun just to audition sounds IMO. Instead of being focussed on a finished track, just tweaking knobs and grooving, it was entertaining me at the witching hour last night.
Cheers
the list of features to be added is still 8 bullet points or so long
This plug got a mention in FutureMusic Spain's news, and there were 500 downloads of the previous to current version.
It's funny you know,
I seem to spend 10s of hours building these plugs,
and don't play with them as much as building,
gotta make some new less rent tunes soon with mine and one dev that springs to mind, is Contralogic's ware.
So I just put in another 2 hours in Orion with OMEN, and found no problems. Prior to this session I had found a linking prob with LFO 2&3. That's fixed in the first post. It sounds really digital IMO, some cool sounds coming out of it. It's fun just to audition sounds IMO. Instead of being focussed on a finished track, just tweaking knobs and grooving, it was entertaining me at the witching hour last night.
Cheers
the list of features to be added is still 8 bullet points or so long
This plug got a mention in FutureMusic Spain's news, and there were 500 downloads of the previous to current version.
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
Heya,
I fixed an issue that made itself apparent.
In mode 3 of the pulse width, which is a cycle divider with a delay,
the delay was causing CPU spikes and also heaps of clicks.
This is a Flowstone quirk, you can't write to memory in a poly stream.
I made a sample and hold on counter end instead,
and that has cleared the problem.
Also I have made the source available in the download.
It's in the first post of the thread.
Cheers
PS-sorry for not carrying through with this, I'm back on it.
I'll update my website soon.
I fixed an issue that made itself apparent.
In mode 3 of the pulse width, which is a cycle divider with a delay,
the delay was causing CPU spikes and also heaps of clicks.
This is a Flowstone quirk, you can't write to memory in a poly stream.
I made a sample and hold on counter end instead,
and that has cleared the problem.
Also I have made the source available in the download.
It's in the first post of the thread.
Cheers
PS-sorry for not carrying through with this, I'm back on it.
I'll update my website soon.
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
I'm making some presets,
and I found that it wouldn't save them as .txt
That's fixed now, d/l in first post
The soft symmetrical clipper in fx sounds nicely heavy on the analog triangle
and I found that it wouldn't save them as .txt
That's fixed now, d/l in first post
The soft symmetrical clipper in fx sounds nicely heavy on the analog triangle
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
Here is the list of alterations I could make,
I have gone over the thread and compiled them-
and thought a little. The ones with an exclamation mark I am likely to do.
Here they are-
-Ping-Pong delay
-!Reverb
-Crush/decimate
-!pan law
-!stereo field
-poly ssc option
-!S&H divisors--powers of 3
-!bipolar/unipolar LFOs
-!Virus forms back in(2048 samples)--(perhaps hmmm)
-Arp
-Serial filters
-!free noise
-!free lfos
MOD:
SOURCES-
!poly cycle option
DESTINATIONS-
oct
semi
fine
pitch
rm
noise pm
noise fm
noise vol
porta
The IDF skin mod is just left out for now- all I have to do is switch off the overlay.
The Virus forms were cleared by Johan Bryntesson, so I will put them back in perhaps.
Here is the quote from Marc Schlaile->
'the waveforms, the virus produces are not under copyright'
I'll be working on this on and off in the next 3 months-
after that I may have to pack up my studio for a little- we'll see
Enjoy the synth and let me know if anything is funky in a sour way-
and what u think of the to-do list
I have gone over the thread and compiled them-
and thought a little. The ones with an exclamation mark I am likely to do.
Here they are-
-Ping-Pong delay
-!Reverb
-Crush/decimate
-!pan law
-!stereo field
-poly ssc option
-!S&H divisors--powers of 3
-!bipolar/unipolar LFOs
-!Virus forms back in(2048 samples)--(perhaps hmmm)
-Arp
-Serial filters
-!free noise
-!free lfos
MOD:
SOURCES-
!poly cycle option
DESTINATIONS-
oct
semi
fine
pitch
rm
noise pm
noise fm
noise vol
porta
The IDF skin mod is just left out for now- all I have to do is switch off the overlay.
The Virus forms were cleared by Johan Bryntesson, so I will put them back in perhaps.
Here is the quote from Marc Schlaile->
'the waveforms, the virus produces are not under copyright'
I'll be working on this on and off in the next 3 months-
after that I may have to pack up my studio for a little- we'll see
Enjoy the synth and let me know if anything is funky in a sour way-
and what u think of the to-do list
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
Heya Jedin 8D
I'll sit down with schematic this month(Jan),
and see what I can do.
Is everything working OK?
Cheers
I'll sit down with schematic this month(Jan),
and see what I can do.
Is everything working OK?
Cheers
-
- KVRist
- 299 posts since 13 Dec, 2015
Thank god I stumbled over your synth over another thread here... Your synth is not listed on http://vst4free.com... Shame on you!
Crazy, I was sure I know any free vst stuff. Will be fun to test your stuff.
The mono/stereo page is empty... What pahhend to the contend?
Crazy, I was sure I know any free vst stuff. Will be fun to test your stuff.
The mono/stereo page is empty... What pahhend to the contend?
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
Oh nice to see you found me!
The 'mono to stereo',
it is just a utility.
It converts a l/mono signal to l/r.
Here it is->
https://www.sendspace.com/pro/dl/3zpzzr
I guess something went wrong with my CSS when I wrote the site.
Actually it was last updated like 3 years ago,
so I have worked on some things.
I'll do a rebuild this year.
Keep an eye on me , I'm still loving computers and VST,
but mainly want to reconcile all the builds before I make some more.
The 'mono to stereo',
it is just a utility.
It converts a l/mono signal to l/r.
Here it is->
https://www.sendspace.com/pro/dl/3zpzzr
I guess something went wrong with my CSS when I wrote the site.
Actually it was last updated like 3 years ago,
so I have worked on some things.
I'll do a rebuild this year.
Keep an eye on me , I'm still loving computers and VST,
but mainly want to reconcile all the builds before I make some more.
- KVRAF
- Topic Starter
- 5140 posts since 22 Jul, 2006 from Tasmania, Australia
x64 ver up
The soft clipper was a bit broken,
so I gutted it and made it into a subtle waveshaper
-- if you could let me know how this part is working I would be thankful,
ie, not blowing up or causing discontinuities
Sync was mislabelled(it was inverted for osc2&3)
So yeah- let me know if it's being screwy, or delicious
njoy! Lap on the tech and energy all
--I can't provide source for FS x64 yet, prolly will when u can get it
The soft clipper was a bit broken,
so I gutted it and made it into a subtle waveshaper
-- if you could let me know how this part is working I would be thankful,
ie, not blowing up or causing discontinuities
Sync was mislabelled(it was inverted for osc2&3)
So yeah- let me know if it's being screwy, or delicious
njoy! Lap on the tech and energy all
--I can't provide source for FS x64 yet, prolly will when u can get it
- Banned
- 208 posts since 6 Sep, 2010
I am running the x32 version right now. I found the save and load bug you mentioned. My workaround is to Export VST2 Bank(s) in my DAWs VST window. Works fine. FXP and FXB files.
Last edited by MutantHero on Sat May 08, 2021 11:40 pm, edited 3 times in total.
- Banned
- 208 posts since 6 Sep, 2010
Kind of excited about this Nick, I am thinking it'll make some interesting waves in the flavor of Waldorf Pulse XOR, and maybe several steps beyond. I am very intrigued by all the thought you put into the various waveform shaping methods in a digital way. I will be spending some serious hours with this. It's novel.