KVR Audio

the3ug3reeder · Post by **the3ug3reeder** » Sun May 06, 2018 9:16 am

msvs wrote:you should drag and drop the bassdrum in one of the normal OSCs

this sounds perfect, however i haven't been able to get this to work.
i tried dragging the bassdrum from the kit, and also from the DRM SQ onto an OSC
also rewatched your (excellent) DRUMS and SYNTH DRUMS walk through vids and couldn't find this feature mentioned.

could you please clarify the this technique?

sircuit · Post by **sircuit** » Sun May 06, 2018 10:49 am

It only works with samples outside the drum kits. You can’t use the drum kits sounds in regular OSCs because. If you really need a sound from the kits, play it, record it and then drag it to osc.

the3ug3reeder · Post by **the3ug3reeder** » Sun May 06, 2018 10:56 am

sircuit wrote:It only works with samples outside the drum kits. You can’t use the drum kits sounds in regular OSCs because. If you really need a sound from the kits, play it, record it and then drag it to osc.

thanks!
so basically in that case you would need to sequence the kick independently using an ARP right?
(it would not be possible to trigger an OSC with the DRM SQ kick track right?)

msvs · Post by **msvs** » Sun May 06, 2018 12:42 pm

yes

but if you ask me, I would just use the piano roll of your daw!?

the3ug3reeder · Post by **the3ug3reeder** » Sun May 06, 2018 12:55 pm

true...
on the other hand, the more I can do directly in Avenger the better I like it;)

not super important, but it might be cool to have a keyboard tracking modulation source specifically for the pitch parameter on the drum kit elements.

msvs · Post by **msvs** » Sun May 06, 2018 2:40 pm

you can route Keytracking on the Drumpitch, but could be difficult to match it on exact note values.

just drag and drop "KEYTRACK" on the top of the keyboard to the "PITCH" knob in a drumslot

jalcide · Post by **jalcide** » Sun May 06, 2018 5:50 pm

I've lost access to Avenger after updating to 1.3.4. It won't authorize in either online or offline mode.

The online method gives an error: "Error: Cannot write license file. Please remove write protection." (Nothing is write protected nor non-standard with file permissions as far as I know.)

The offline method fails with: "License cannot be activated. Please download a new keyfile." (Downloading a new keyfile doesn't solve it for me.)

I've sent an email to the support email, but thought I'd try here, too. Tried searching this thread, as well.

Any ideas to try?

Windows 10 64 bit. Latest version of several DAWs, same issue. Tried with a blank project and new instance.

Cheers.

the3ug3reeder · Post by **the3ug3reeder** » Sun May 06, 2018 9:10 pm

msvs wrote:you can route Keytracking on the Drumpitch, but could be difficult to match it on exact note values.

just drag and drop "KEYTRACK" on the top of the keyboard to the "PITCH" knob in a drumslot

yes... that was first thing i tried: this method doesn't work for getting exact note values.

tapiodmitriyevich · Post by **tapiodmitriyevich** » Mon May 07, 2018 3:58 am

jalcide wrote:I've lost access to Avenger

No idea, I'd probably hunt for their traces in %appdata%, %localappdata%, documents folder, c:\programdata\, registry and then cleanup + re-install. Or wait for support reply

msvs · Post by **msvs** » Mon May 07, 2018 11:08 am

this is a problem, which can be solved best by contacting Rene

Trance Euphoria · Post by **Trance Euphoria** » Mon May 07, 2018 11:25 am

Hello All

Just a quick heads up that Trance Euphoria has released a new Avenger Sound Set 'Future Club Trance' here is the demo:-
https://soundcloud.com/trance-euphoria- ... or-avenger

Im releasing it officially on distributor sites either later this week or next but you can buy it at selfy now, there are two versions full pack which contains the sound set and construction kits and sound set only pack, i think they are reasonably priced here are the details :-

Trance Euphoria are proud to release ‘Future Club Trance For Vengeance Avenger’ featuring 128 x Top Quality Presets & 10 x Trance Construction Kits as heard in the demos.

Inspired by all the top Trance Artists and festivals from around the world.

Whats In The Pack?
* 128 x Vengeance Avenger Presets.
* 10 x Trance Construction Kits (WAV/MIDI & Avenger Presets).
* 100% Royalty Free.
* 557MB Zipped | 600MB Unzipped.

Patches Broken Down:-
38 x Basses
31 x Leads
16 x Pads
26 x Plucks
17 x Synths

Construction Kits Details
* Kit BPM ranges from 135 -142.
* Each kit folder is BPM and KEY labelled.
* Each Kit Contains folder of MIDI Files for all main parts.
* Each Kit Contains Text File of what Avenger Presets was used.
* Each Kit has Kick, Percussion Inc Top Loops, Snares, Crashes etc and any additional FX Used (WAV 24-Bit).
* Each Kit has WAV Stems - Basslines, Leads, FXs, Synths, Plucks etc (WAV 24- Bit).
* 152 x WAV Files (24-Bit).
* 41 x MIDI Files.
* 100% Royalty Free.

* Please Use Avenger Version 1.3.4 Or Higher.
* Please Note : Keep your software legal and up-to-date to avoid any issues when loading your new presets.

Future Club Trance For Avenger - Full Pack --> HERE <--
Future Club Trance For Avenger - Sound Set Only --> HERE <--

We have also two other Avenger sets PSY Trance Anthems & Top Artists Trance Sounds which can be found on selfy --> HERE <--

These are also available at :-
Producerloops - PSY Trance Anthems & Top Artists Trance Sounds
Dance MIDI Samples - PSY Trance Anthems & Top Artists Trance Sounds
Beatport Sounds - PSY Trance Anthems & Top Artists Trance Sounds

Thanks Trance Euphoria

Norrin_Radd · Post by **Norrin_Radd** » Mon May 07, 2018 11:05 pm

Help me out here, what is the best way to add vibrato to a patch from the modwheel?

Add the modwheel to the mod matrix and assign it to the "Vib Amount"?

If so, how in the heck do I get the vibrato rate to be quantized to my DAW? Seems like I can only adjust the rate in Hz... That's not what I need for some sick modwheel vibrato! :'(

sircuit · Post by **sircuit** » Mon May 07, 2018 11:18 pm

Assign a synced LFO to the Transpose knob, keep the mod matrix depth to zero then assign the MW to LFO modulation depth (the new entry will be yellow colored, and give it a value of 10-15) and you're done.

Bansaw · Post by **Bansaw** » Mon May 07, 2018 11:20 pm

Mod Env - question about fine tuning the points

I'm creating some mod envelopes and there's a point I want to be 50% (on the y axis). For the life of me I can't get it on 50, it will sit just about 50 by a few cents and just below. Any ideas how I can get it fine tuned spot on?
(I tired shift+drag, no luck) Theres a horizontal kind of snapping to the grid, but I don't think vertical.

Norrin_Radd · Post by **Norrin_Radd** » Mon May 07, 2018 11:32 pm

sircuit wrote:Assign a synced LFO to the Transpose knob, keep the mod matrix depth to zero then assign the MW to LFO modulation depth (the new entry will be yellow colored, and give it a value of 10-15) and you're done.

Ah hah! Transpose knob.

Well, can we at least agree that they did not make this very intuitive. Honestly, I feel like vibrato on the modwheel should be a click of a button. even if it just sets this stuff up for me.

Anyway, got it working, thanks for the help!

Vengeance Producer Suite - AVENGER - 1.8.5 the main thread