Latest News: Bitwig updates Bitwig Studio to v5.1
DrivenByMoss: Bitwig extension for many hardware controllers (version 23.2.0)
- KVRer
- 19 posts since 7 Jun, 2017
This might be a Bitwig API issue, but the Takeover modes don't seem to work in the mixer (volume, pan, sends). With devices they do, which is nice.
Flexi v1.10
Bitwig 2.4 Beta 2
Flexi v1.10
Bitwig 2.4 Beta 2
-
- KVRist
- 46 posts since 21 May, 2016
hej,
first of all thanks to Moss for all the great work!
i have one question, i did not use my apc mini in a while, i downloaded the newest drivenbymoss-version, am on win10 and bitwig 2.3.5
now my question: wasn`t it possible at one point to switch between the sends, for example send 1 and 2 by holding shift and then pressing the "send"-button? it doesn`t seem to work anymore or am i doing something wrong?
love,
michi
first of all thanks to Moss for all the great work!
i have one question, i did not use my apc mini in a while, i downloaded the newest drivenbymoss-version, am on win10 and bitwig 2.3.5
now my question: wasn`t it possible at one point to switch between the sends, for example send 1 and 2 by holding shift and then pressing the "send"-button? it doesn`t seem to work anymore or am i doing something wrong?
love,
michi
- KVRian
- 512 posts since 22 Aug, 2014
EDIT:Delete
sorry,I found APC mini in Driven Supported Model(s) list
sorry,I found APC mini in Driven Supported Model(s) list
VST Mappings for Bitwig
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
- KVRAF
- Topic Starter
- 4104 posts since 13 May, 2004
Your problem is totally clear but noone could reproduce it so far. Therefore, I have no idea what to do or how to help you. Sorry.turbo_kev wrote:Hi last try at explaining my problem
Did you try the suggestion with adding send tracks?
- KVRian
- 592 posts since 18 Dec, 2014
Hi Moss I know I am a pain in the arse
but for a NON musician I get hours of pleasure using all this gear and thanks to your extensions.
So when a problem comes along its so frustrating that something does not work as it should
I loaded up BWS 2.3.5 with your old extension and everything works perfectly
and even in the beta versions of BWS and your beta extensions
the demo projects work perfectly
but as soon as I load one of my existing projects or make a new project with no vst and all my other controllers disconnected
I get the problem
and yes I tried with 1 monitor setup and also with send tracks
and I still get the problem
so I can only presume that something in BWS beta or the extension beta is causing this
Once again sorry to be a pain in the arse
but if you don't ask you don't learn
cheers
kev
but for a NON musician I get hours of pleasure using all this gear and thanks to your extensions.
So when a problem comes along its so frustrating that something does not work as it should
I loaded up BWS 2.3.5 with your old extension and everything works perfectly
and even in the beta versions of BWS and your beta extensions
the demo projects work perfectly
but as soon as I load one of my existing projects or make a new project with no vst and all my other controllers disconnected
I get the problem
and yes I tried with 1 monitor setup and also with send tracks
and I still get the problem
so I can only presume that something in BWS beta or the extension beta is causing this
Once again sorry to be a pain in the arse
but if you don't ask you don't learn
cheers
kev
BWS 5.0.6,Spark LE, V Collection 9.2 BS1 & BS PRO, KS & KS pro keylab 25, Axiom pro 49,Behringer UMC1820,LPP ProFx8 v2 Icon m+, KRK 10/3,win 10 pro,i7 5820k 4ghz ,16G ddr 4 1TB NVMe.M2 msi x99a sli + NV GF Gt710, Matrix Brute Roland TR8S
- KVRian
- 592 posts since 18 Dec, 2014
Hi pdxindy
It doesn't have to be one of my projects, I can just make a new blank project from scratch
I make 4 blank audio tracks, I don't add any vst´s I don't add any input controllers
I double click in each track and make a blank track of colour red, then green then blue then light green
I then drag each track over to the clip launcher
then no matter what track I have highlighted, as soon as I launch a clip from the LPP
the highlighted track jumps to the first track
and like iv said already, this does not happen in BWS v 2.3.5 with the old extension
and in the beta 2 of BWS and the 2nd beta extension from moss only the included demo tracks work perfectly
any of my projects don't work, and even a blank project doesn't work
I could ask him if I can send just a blank project
but I would have thought a blank project is a blank project
cheers
for listening
kev
It doesn't have to be one of my projects, I can just make a new blank project from scratch
I make 4 blank audio tracks, I don't add any vst´s I don't add any input controllers
I double click in each track and make a blank track of colour red, then green then blue then light green
I then drag each track over to the clip launcher
then no matter what track I have highlighted, as soon as I launch a clip from the LPP
the highlighted track jumps to the first track
and like iv said already, this does not happen in BWS v 2.3.5 with the old extension
and in the beta 2 of BWS and the 2nd beta extension from moss only the included demo tracks work perfectly
any of my projects don't work, and even a blank project doesn't work
I could ask him if I can send just a blank project
but I would have thought a blank project is a blank project
cheers
for listening
kev
BWS 5.0.6,Spark LE, V Collection 9.2 BS1 & BS PRO, KS & KS pro keylab 25, Axiom pro 49,Behringer UMC1820,LPP ProFx8 v2 Icon m+, KRK 10/3,win 10 pro,i7 5820k 4ghz ,16G ddr 4 1TB NVMe.M2 msi x99a sli + NV GF Gt710, Matrix Brute Roland TR8S
- KVRian
- 592 posts since 18 Dec, 2014
Hi Moss
Strange thing iv found with my problem and the LPP
As I said none of my existing projects work properly with the LPP
but while I was trying out different solutions, I accidently closed a project , and you get a request to save it
I said yes.
the next time I loaded the project it all works as it should
I tried the same thing with a few more projects, and yes if I re-*save them
the next time I load them they work
this also applies to a blank dummy project
, as long as I resave it the next time it works
does that shed any light on what might be causing my problem
its a work around, but I would love to know what's going on
cheers
Kev
Strange thing iv found with my problem and the LPP
As I said none of my existing projects work properly with the LPP
but while I was trying out different solutions, I accidently closed a project , and you get a request to save it
I said yes.
the next time I loaded the project it all works as it should
I tried the same thing with a few more projects, and yes if I re-*save them
the next time I load them they work
this also applies to a blank dummy project
, as long as I resave it the next time it works
does that shed any light on what might be causing my problem
its a work around, but I would love to know what's going on
cheers
Kev
BWS 5.0.6,Spark LE, V Collection 9.2 BS1 & BS PRO, KS & KS pro keylab 25, Axiom pro 49,Behringer UMC1820,LPP ProFx8 v2 Icon m+, KRK 10/3,win 10 pro,i7 5820k 4ghz ,16G ddr 4 1TB NVMe.M2 msi x99a sli + NV GF Gt710, Matrix Brute Roland TR8S
- KVRAF
- Topic Starter
- 4104 posts since 13 May, 2004
For all you Beta testers, here is a tutorial video with all the new features for Push 1 and Push 2:
https://www.youtube.com/watch?v=PR616i8jw24
https://www.youtube.com/watch?v=PR616i8jw24
- KVRian
- 512 posts since 22 Aug, 2014
Ahhhhh!!!
DrivenByMoss for 2.4 has great features!
Clips,Faders,these visualising is great.
AND markers features awesome.
I want buy Push2, but my money short
But I'm try add marker for my MaschineStudio_Flexi
Thanks Moss!
DrivenByMoss for 2.4 has great features!
Clips,Faders,these visualising is great.
AND markers features awesome.
I want buy Push2, but my money short
But I'm try add marker for my MaschineStudio_Flexi
Thanks Moss!
VST Mappings for Bitwig
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
- KVRAF
- Topic Starter
- 4104 posts since 13 May, 2004
DrivenByMoss Beta 3 for Bitwig 2.4 is online, with changes for Push1/2:
- New: Push 2: Some modes have better contrast.
- New: Press Browser + Drum Pad in Drum View (fixed) and Drum 64 to open the browser.
- New: All messages are always displayed in the display and on the screen.
- New: Use different colors for scene buttons (scenes vs. resolutions).
- New: Drum 64 view can now also start scenes.
- New: Clip view displays the grid resolution when changed.
Last edited by moss on Sun Aug 05, 2018 8:32 pm, edited 1 time in total.
- KVRAF
- Topic Starter
- 4104 posts since 13 May, 2004
... and ... a tutorial video for the now included support for NIs Kontrol S25, S39, S61 and S88:
https://www.youtube.com/watch?v=6qAUX4rThFw
https://www.youtube.com/watch?v=6qAUX4rThFw
- KVRian
- 512 posts since 22 Aug, 2014
Thanks Moss!!
In browser operation tips is
These operation prevent to parameter jump in Popup Browser.
In browser operation tips is
These operation prevent to parameter jump in Popup Browser.
VST Mappings for Bitwig
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
- KVRAF
- Topic Starter
- 4104 posts since 13 May, 2004
Here is a little update, which fixes a NullPointerException with OSC:
http://mossgrabers.de/stuff/DrivenByMossBeta4.zip
http://mossgrabers.de/stuff/DrivenByMossBeta4.zip
- KVRian
- 512 posts since 22 Aug, 2014
Thanks a lot!
Working fine my MaschineStudio with Generic Flexi.
Working fine my MaschineStudio with Generic Flexi.
VST Mappings for Bitwig
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--
--Bitwig 5/ Live10 Suite/ Maschine/ HP X360 8Core--