Login / Register 0 items | $0.00 New @ KVR
hopkihc
KVRist
 
184 posts since 18 Aug, 2009

Postby hopkihc; Wed Jul 04, 2012 10:01 am

While I haven't done an exhaustive test, my Arturia Laboratory 49 powers off the Receptor and plays notes just fine. Pitch bend, mod wheel, aftertouch, sustain pedal... no issues.

I'll post back if there are any concerns with the controllers.
luiggy santiago
KVRer
 
9 posts since 12 Dec, 2004

Postby luiggy santiago; Thu Jul 05, 2012 4:08 am

T2000 wrote:M-Audio Keystation Pro and Keystation 88es both work fine via USB. Novation Remote Zero SL works fine, but X-Station does NOT without a driver. Yamaha tells me that the KX8 will NOT work via USB without installed drived.

BTW, just so everyone is aware of something which I've only recently learned: you can use a MIDI merge box (eg by MIDI solutions) to plug 2 keyboards into the Receptor's MIDI in port, if you can't use USB for either of them. Muse tells me that this works fine. (I've just ordered mine.)

Tom




Tom
I can control volume faders of the Receptor2 with the KORG NANO Kontrol 2?
There is a way to change Receptor Snapshop patchs whit the nanokontrol2?
Regards
Luiggy
nathankingcole
KVRist
 
221 posts since 15 May, 2006

Postby nathankingcole; Tue Jul 10, 2012 12:03 pm

I use the Nano Kontrol (1- I don't know about 2) via USB for volume, mute/unmute, and bus send level. I have not used it for program changes, just as a mixer.
cybergod
KVRer
 
3 posts since 22 Aug, 2012

Postby cybergod; Mon Oct 22, 2012 7:04 pm

M-Audio Keystation 88 Pro works for me
hopkihc
KVRist
 
184 posts since 18 Aug, 2009

Postby hopkihc; Thu Jul 18, 2013 4:50 pm

KMI QuNexus working great with my Rec 2 OS 1.9
graphix612
KVRer
 
8 posts since 27 Sep, 2006, from KS

Postby graphix612; Fri Aug 02, 2013 11:38 am

I also use an M-Audio Axiom 61 key
Fishoow
KVRist
 
199 posts since 5 May, 2014, from New Mexico

Postby Fishoow; Wed Jun 04, 2014 10:21 am Re: USB instruments/controllers that don't need specific drivers

As I am a guitar player I am hoping to find a foot controller for my Receptor Trio. I would love to use the Keith McMillen 12step but it comes with software and will likely not work with Receptor. Any foot controllers people have found that work with receptor?
nathankingcole
KVRist
 
221 posts since 15 May, 2006

Postby nathankingcole; Wed Jun 04, 2014 11:25 am Re: USB instruments/controllers that don't need specific drivers

The behringer fcb 1010 works great- very flexible and hardy.
gnosis123
KVRist
 
131 posts since 11 Apr, 2011, from Paris, France

Postby gnosis123; Thu Jun 05, 2014 10:10 am Re: USB instruments/controllers that don't need specific drivers

Fishoow wrote:As I am a guitar player I am hoping to find a foot controller for my Receptor Trio. I would love to use the Keith McMillen 12step but it comes with software and will likely not work with Receptor. Any foot controllers people have found that work with receptor?


The KMI Softstep works great with my R2 Pro Max. The KMI software is used to create the 'scenes' for the plugs you want to control, but once you download them to the unit, it runs connected to the R2 in standalone mode.
gnosis123
KVRist
 
131 posts since 11 Apr, 2011, from Paris, France

Postby gnosis123; Fri Jun 06, 2014 8:09 am Re: USB instruments/controllers that don't need specific drivers

gnosis123 wrote:The KMI Softstep works great with my R2 Pro Max. The KMI software is used to create the 'scenes' for the plugs you want to control, but once you download them to the unit, it runs connected to the R2 in standalone mode.


One caveat I've since discovered: the Receptor does not boot correctly if the SS is connected. The SS has to be attached after the Receptor is fully up.
Fishoow
KVRist
 
199 posts since 5 May, 2014, from New Mexico

Postby Fishoow; Mon Sep 01, 2014 9:12 pm Re: USB instruments/controllers that don't need specific drivers

gnosis123 wrote:
One caveat I've since discovered: the Receptor does not boot correctly if the SS is connected. The SS has to be attached after the Receptor is fully up.


Curiously I have had no trouble with my KMI Quneo. It's entirely PnP, though I had to assign CC/ note# etc. through it's software on laptop.
Fish Out Of Water
Entune Productions
nathankingcole
KVRist
 
221 posts since 15 May, 2006

Postby nathankingcole; Tue Sep 02, 2014 5:54 am Re: USB instruments/controllers that don't need specific drivers

The issues I've had with R2 bootup are when 2 usb controllers were plugged in when I hit the on button.
bjbaylon
KVRer
 
2 posts since 25 Oct, 2014

Postby bjbaylon; Sat Oct 25, 2014 2:05 pm Re: USB instruments/controllers that don't need specific drivers

Currently I am using an M-Audio Oxigen 61 version 3 on my Receptor 2+ on system 2. At the same time I can use a Behringer 49 notes controller. I first boot with only the Oxigen conected and after plug the Behrnger. Same results with an Akai LPD8 and the Oxigen. I am about to try the 3 at the same time.
Fishoow
KVRist
 
199 posts since 5 May, 2014, from New Mexico

Postby Fishoow; Sat Nov 15, 2014 10:28 am Re: USB instruments/controllers that don't need specific drivers

bjbaylon wrote:Currently I am using an M-Audio Oxigen 61 version 3 on my Receptor 2+ on system 2. At the same time I can use a Behringer 49 notes controller. I first boot with only the Oxigen conected and after plug the Behrnger. Same results with an Akai LPD8 and the Oxigen. I am about to try the 3 at the same time.


How'd it work?
Fish Out Of Water
Entune Productions
doc holywood
KVRer
 
7 posts since 15 Apr, 2012, from Belgium

Postby doc holywood; Sun Nov 16, 2014 3:22 am Re: USB instruments/controllers that don't need specific drivers

korg kronos x works perfect with receptor vip
also have a roland V-piano grand as output for sound of receptor vip routed through korg kronos x and as a keyboard controller for korg kronos x sound engine with audio re-routed to roland V-piano grand monitors
nice setup
PreviousNext

Moderators: Meffy, Kevin@MuseResearch, Bryan@MuseResearch, gary@museresearch, farhan

Return to Muse Research and Development