I have worked a bit with the new audio pos/neg splitter, aka distortion module.
A straight forward application for the new module is the Rectifier.
This can use only the positive half of the audio (1 diode ->1D) or the full signal by flipping the negative half of the audio to positive using a bridge rectifier (Bridge).
Note that early stomp boxes used this technique as a simple octaver. Send a sine wave into it and switch from 1D to Bridge to see the effect.
Some new versions for the amp/speaker simulations, with some additional tones. I basically changed the "amp" only and let the filter network as before. That's why they are v2 now.
Finally a Parallel EQ with bell shapes.
As with the previous parallel EQ, the phase shift is less than half compared of the usual EQs. To me it sounds more open and transparent, but that could just be my imagination
Because of the peculiarities of parallel EQs, i split things in separate cut and boost filters. So this one is actually 4 bands. 2x cut plus 2x boost.
Gain is only +-6dB!
Zip file is HERE
Enjoy!
P.S.: I want to make an exiter, but my current results are not as expected. Can anyone point me to a good VST Exiter, for me to find out what i'm doing wrong?
Thanks!
Now some new effects
Official support for: mutools.com
Now some new effects
2014-03-19T19:20:46+00:00
I have worked a bit with the new audio pos/neg splitter, aka distortion module.
A straight forward application for the new module is the Rectifier.
This can use only the positive half of the audio (1 diode ->1D) or the full signal by flipping the negative half of the audio to positive using a bridge rectifier (Bridge).
Note that early stomp boxes used this technique as a simple octaver. Send a sine wave into it and switch from 1D to Bridge to see the effect.
Some new versions for the amp/speaker simulations, with some additional tones. I basically changed the "amp" only and let the filter network as before. That's why they are v2 now.
Finally a Parallel EQ with bell shapes.
As with the previous parallel EQ, the phase shift is less than half compared of the usual EQs. To me it sounds more open and transparent, but that could just be my imagination
Because of the peculiarities of parallel EQs, i split things in separate cut and boost filters. So this one is actually 4 bands. 2x cut plus 2x boost.
Gain is only +-6dB!
Zip file is HERE
Enjoy!
P.S.: I want to make an exiter, but my current results are not as expected. Can anyone point me to a good VST Exiter, for me to find out what i'm doing wrong?
Thanks!
AndreasD
https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=202283
Post Reply
1 post
• Page 1 of 1
Jump to
- The Main Forums
- ↳ KVR Studio Manager
- ↳ KVR Experts
- ↳ Getting Started (AKA What is the best...?)
- ↳ Instruments
- ↳ Effects
- ↳ Hosts & Applications (Sequencers, DAWs, Audio Editors, etc.)
- ↳ Guitars
- ↳ Mobile Apps and Hardware
- ↳ Soundware
- ↳ Samplers, Sampling & Sample Libraries
- ↳ Hardware (Instruments and Effects)
- ↳ Modular Synthesis
- ↳ Sound Design
- ↳ Production Techniques
- ↳ Music Theory
- ↳ Computer Setup and System Configuration
- ↳ DSP and Plugin Development
- ↳ DIY: Build it and they will come
- ↳ Music Cafe
- ↳ Sell & Buy (+Special Offers, Deals & Promos)
- ↳ KVR Developer Challenge 2023
- ↳ Everything Else (Music related)
- ↳ Off Topic
- ↳ Off Topic Classics
- Official Company Forums
- ↳ 2getheraudio
- ↳ accSone
- ↳ Acon Digital
- ↳ AcousticsampleS
- ↳ AcousModules
- ↳ Agitated State
- ↳ AIR Music Technology
- ↳ AMG
- ↳ Ample Sound
- ↳ Antares Audio Technologies
- ↳ Apisonic Labs
- ↳ apulSoft
- ↳ AriesCode
- ↳ Arts Acoustic
- ↳ Arturia
- ↳ Audjoo
- ↳ AudioSpillage
- ↳ Audiority
- ↳ Best Service
- ↳ Big Tick
- ↳ Bitwig
- ↳ Controller Scripting
- ↳ Blue Cat Audio
- ↳ Cherry Audio
- ↳ CWITEC
- ↳ Embertone
- ↳ energyXT
- ↳ Eventide
- ↳ Expert Sleepers
- ↳ forward audio
- ↳ Future Audio Workshop
- ↳ FXpansion
- ↳ g200kg
- ↳ Harrison Mixbus
- ↳ HG Fortune
- ↳ Homegrown Sounds
- ↳ HoRNet Plugins
- ↳ Ilya Efimov Production
- ↳ Image Line
- ↳ Impact Soundworks
- ↳ Indiginus
- ↳ Insert Piz Here
- ↳ Ju-X
- ↳ Kirk Hunter Studios
- ↳ Kirnu
- ↳ Kong Audio
- ↳ Krotos
- ↳ Kuassa
- ↳ KV331 Audio
- ↳ LennarDigital
- ↳ Les Productions Zvon
- ↳ Liqube Audio
- ↳ Loomer
- ↳ LVC-Audio
- ↳ Maizesoft
- ↳ Manytone Music
- ↳ MeldaProduction
- ↳ Mellowmuse
- ↳ MIDIMood
- ↳ moForte
- ↳ Mozaic Beats
- ↳ mucoder
- ↳ MusicDevelopments
- ↳ Tips & Tricks
- ↳ MusicLab
- ↳ MUTOOLS
- ↳ New Sonic Arts
- ↳ NUSofting
- ↳ Oli Larkin Plugins
- ↳ Orange Tree Samples
- ↳ patchpool
- ↳ Photosounder
- ↳ PlugInGuru
- ↳ Polyverse Music
- ↳ Precisionsound
- ↳ Premier Sound Factory
- ↳ Psychic Modulation
- ↳ Realitone
- ↳ Resonance-Sound
- ↳ Reveal Sound
- ↳ Roger Linn Design
- ↳ rs-met
- ↳ S3A: Spatial Audio
- ↳ SaschArt
- ↳ Smart Electronix
- ↳ sonible
- ↳ SonicBirth
- ↳ Sonic Reality / eSoundz.com
- ↳ Soundiron
- ↳ SPC Plugins
- ↳ Sugar Bytes
- ↳ TAL Software
- ↳ Tokyo Dawn Labs
- ↳ Tracktion
- ↳ u-he
- ↳ u-he Linux support
- ↳ United Plugins
- ↳ VAZ Synths
- ↳ Virharmonic
- ↳ Wolfgang Palm
- ↳ xoxos
- ↳ XSRDO - SynthCraft
- ↳ ZynAddSubFX
- Site Stuff
- ↳ Site Stuff
- Archived Forums
- ↳ AlgoMusic
- ↳ easytoolz
- ↳ Elevayta
- ↳ Hollow Sun
- ↳ Kazrog
- ↳ LinPlug
- ↳ Muse Research and Development
- ↳ Shuriken
- ↳ SoHa Sound Design
- ↳ Soniccouture
- ↳ Topten Software
- ↳ Tweakbench
- ↳ Valhalla DSP
- ↳ CK Modules & VST
- ↳ Sennheiser AMBEO
- ↳ Muon Software
- ↳ Westgatesounds.net
- ↳ Squaredheads
- ↳ Sonigen
- ↳ CFA-Sound
- ↳ Back In Time Records
- ↳ Livelab.dk
- ↳ Skytopia
- ↳ audioD3CK
- ↳ Inspire Audio
- ↳ Krakli
- ↳ Drumdrops
- ↳ Futucraft
- ↳ OverTone DSP
- ↳ RaXnTraX
- ↳ solar3d-software
- ↳ Signaldust
- ↳ Soundemote
- KVR Forum index
- All times are UTC
- Delete cookies