Trans Computer Maschine v1.30 released - evolved
-
- KVRist
- 94 posts since 9 Jul, 2004
After downloading t-c-m.rar v1.02 here (http://www.freewebs.com/wallyaudio/t-c-m.rar) and unraring it, i got the following error message:
t-c-m.rar: CRC-Error in T-C-M\T-C-M\T-C-M.dll. TheFile is corrupt.
so your rar file might be bad packed, hope you'll fix it soon
maniacoli
t-c-m.rar: CRC-Error in T-C-M\T-C-M\T-C-M.dll. TheFile is corrupt.
so your rar file might be bad packed, hope you'll fix it soon
maniacoli
-
- KVRAF
- 2802 posts since 31 Aug, 2011
File unpacked fine here.maniacoli wrote:your rar file might be bad packed
Archive OK.
Well, i did, of course. But its not working properly anyway. As you can see on this GIF, (click thumbnail to view animation), it loads with 30 but runs at 120 - until i start moving the knob. Only then it slows down to what its supposed to run at. Also, it does not go back to the set manual speed after syncing/unsyncing.CMT wrote:You must disable the 'Sync' button to load tempo stored in a preset (check readme in new DL).
Will check out and reply to the rest later, have to take care of some other things now. Thanks for the quick update.
PS: Did you see my last post? (Regarding the LFO trigger problem?)
-
- KVRist
- 46 posts since 9 Jul, 2009 from Somerset UK
Just a quickie to say that I love this synth - it's easy to get some lovely constantly shifting sequences out of it.
Thanks!
Thanks!
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
This is not a bug, if you set such connection, the S/H takes a sample from the LFO fot each LFO cycle so the sampled value is always the same...ENV1 wrote:BTW, i think i may have found another. When i feed the S&H module one of the LFO waveforms, the LFO doesnt trigger the module. Keyboard Trigger and Sequencer Clock work, though. LFO Trigger works fine when one of the OSC waveforms is used.
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
You were right, i fixed it and I'm uploading v1.03 right now...ENV1 wrote:Well, i did, of course. But its not working properly anyway. As you can see on this GIF...
Thank you very much for your help.
WC
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
Trans Computer Maschine, the ultimate modular pattern creator was updated to v1.03:
----------------
VERSION HISTORY
----------------
v1.00
- First release
v1.01
- Fixed Sequencer not responding to MIDI Continuous Controllers.
v1.02
- Fixed Sequencer rows settings messed up after preset reload.
- Fixed decay stages non functional after saving and reloading presets.
- Fixed filter pole-switch button lower left quarter unresponsive.
- Fixed misspelled 'Oscillators' in GUI.
- Sequencer 'Sync' button moved close to 'Tempo' to avoid confusing user.
v1.03
- Fixed tempo setting from loaded preset ignored.
(Thanks to ENV1 at the KVR forum for reporting bugs)
http://www.freewebs.com/wallyaudio/t-c-m.rar
If any of you find a bug please post it here so I'll try to fix it during the voting period.
I just created an account for preset submissions which will be included in the final release: tcmpresets@gmail.com
Thank you all.
Walter
----------------
VERSION HISTORY
----------------
v1.00
- First release
v1.01
- Fixed Sequencer not responding to MIDI Continuous Controllers.
v1.02
- Fixed Sequencer rows settings messed up after preset reload.
- Fixed decay stages non functional after saving and reloading presets.
- Fixed filter pole-switch button lower left quarter unresponsive.
- Fixed misspelled 'Oscillators' in GUI.
- Sequencer 'Sync' button moved close to 'Tempo' to avoid confusing user.
v1.03
- Fixed tempo setting from loaded preset ignored.
(Thanks to ENV1 at the KVR forum for reporting bugs)
http://www.freewebs.com/wallyaudio/t-c-m.rar
If any of you find a bug please post it here so I'll try to fix it during the voting period.
I just created an account for preset submissions which will be included in the final release: tcmpresets@gmail.com
Thank you all.
Walter
- KVRAF
- 6325 posts since 18 Jul, 2008 from New York
Here's a screenshot:
This is a fun plug-in. I spent a couple hours fiddling around with it. I'd say the old school sequencer is the best part. The synth's filter is slightly let down by its SynthEdit origins but some nice sounds are possible including some weirdness when you use the ring modulator and FM.
Note the GUI is too big to fit on my netbook. It takes a lot of screen real estate.
This is a fun plug-in. I spent a couple hours fiddling around with it. I'd say the old school sequencer is the best part. The synth's filter is slightly let down by its SynthEdit origins but some nice sounds are possible including some weirdness when you use the ring modulator and FM.
Note the GUI is too big to fit on my netbook. It takes a lot of screen real estate.
- KVRian
- 1064 posts since 28 May, 2003 from world
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
Thank you all guys,
I'm so happy 'Trans Computer Maschine' was #3 in yesterday's KVR top ranks for both 'All' and 'Free' downloads.
Hope you really enjoy my work. I'm still alert to any bug report so I might fix it as soon as possible.
Thank you again...
Walter
I'm so happy 'Trans Computer Maschine' was #3 in yesterday's KVR top ranks for both 'All' and 'Free' downloads.
Hope you really enjoy my work. I'm still alert to any bug report so I might fix it as soon as possible.
Thank you again...
Walter
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
Believe me I made it the smaller/readable possible. I personally don't like plug-ins with multiple windows, I want everything in one screen so I can take my controller and start producing without touching the mouse. This concept applies here cause T-C-M was designed mainly as a live composition tool. As you might notice, it is completely MIDI controllable. You can even control it with two keyboards for the synth notes and sequencer buttons toggling.FrantzM wrote:Note the GUI is too big to fit on my netbook. It takes a lot of screen real estate.
Thank you very much for your interest.
WC
- KVRAF
- 6325 posts since 18 Jul, 2008 from New York
Yes, I like that the sequence is transposable via MIDI and clicking the SET button allows you to jump directly to that step. Please consider releasing the step sequencer as a separate product. It is a really nice composition tool.CMT wrote:As you might notice, it is completely MIDI controllable. You can even control it with two keyboards for the synth notes and sequencer buttons toggling.
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
Somebody put a 'Trans Computer Maschine' demo in Youtube:
http://www.youtube.com/watch?v=0OMi6Nyztcw
However, to feel it working for real you must have it, set up your MIDI controller(s) and start playing as a kid with a new toy. I'm working on some FAQ document for people with not enough sound synthesis knowledge to dig into it quick.
Enjoy,
Walter
http://www.youtube.com/watch?v=0OMi6Nyztcw
However, to feel it working for real you must have it, set up your MIDI controller(s) and start playing as a kid with a new toy. I'm working on some FAQ document for people with not enough sound synthesis knowledge to dig into it quick.
Enjoy,
Walter
-
- KVRist
- 392 posts since 21 Sep, 2011 from Northern California
some of the presets not working for me. I will dl again, maybe it didnt unpack properly.
edit: nope still not working. For example the 'computing' preset.
win 7 64, reaper 64 using built in bridging. It might just be from the bridge, but usually its all or nothing. I never had something kinda work with the bridge before. In any case the presets that work sound great.
edit: nope still not working. For example the 'computing' preset.
win 7 64, reaper 64 using built in bridging. It might just be from the bridge, but usually its all or nothing. I never had something kinda work with the bridge before. In any case the presets that work sound great.
- KVRAF
- 6325 posts since 18 Jul, 2008 from New York
All presets work for me with Win 7, 32 bit in Reaper and Renoise. I have not tried 64 bit DAWs.Panphobia wrote: edit: nope still not working. For example the 'computing' preset.
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
I'm not sure because I can't check myself any possible set up at the moment (this is a 'one person project') but it's possible that some parameters in the first preset from the pre-loaded bank are 'initialized' in some hosts. This is not a big issue cause I can just replace the first preset with an 'Initial' one but anyway just let me know...Panphobia wrote:some of the presets not working for me. For example the 'computing' preset.
Thank you for your interest.
Walter