KVR Audio

nr1killabee · Post by **nr1killabee** » Tue Aug 12, 2014 5:28 am

Hello chopen,

I recorded myself testing the soundpacks in Ecoloop yesterday.
I still cannot load the Commodore64 pack, the patchfile is 0kb ?
The other packs are working so far.
Can you help me for loading the commodore64 pack ?

http://youtu.be/mmfnRjfJFc0

Like you can see I get some parameter errors, but if I understand you right I have to save it after loading to prevent it?
C1 in ecoloop correspondents with C0 in Cubase

chopen · Post by **chopen** » Tue Aug 12, 2014 11:16 am

It is totally rubbish this video. How can it be done so many bullshit! I am going to have to make one myself for forget this last !

Makes nothing more !!!

chopen · Post by **chopen** » Tue Aug 12, 2014 1:34 pm

Actually, I am uploading the soundbanks ' sonatina symphonic orchestrated ' and ' Novation Heritage ' which are very beautiful (You have waste them with this video) and after, they correspond more with the new version of EcolooP.

There was effectively a bug with the program patch. When you load a program kit (like sonatine orchestra brass for exemple), the program bank of ecolooP reset to the program 1. If you load this in program 2, there will some mistake in program 1...

To avoid this problem, Load your kit somewhere else that 'program 1' and after load, go back in the current program.

You can have only one patch.pat for a session EcolooP ! (but you can change the patch.pat file when you want)

In sonatine symphonic orchestra, there was 'patch.pat' in sections directory which was of use to nothing
Delete this and keep the patch.pat in the same .fxp directory

There is effectively an octave of difference between EcolooP and cubase but I think that will stay as this for not weigh down the program...

See you later !
Still some problems to be settled...

chopen · Post by **chopen** » Tue Aug 12, 2014 5:38 pm

I have just corrected bugs listed in particular at the level of the load of .fxp and .fxb

Update 1.927 :

Fix bug when you load .fxp, .fxb files.

Good parameters values when you start the plugins in slot 7.

Improvment at the yellow slider (can disappaer in extreme right).

Can you delete the video nr1Killabee because I don't like this. I'll make a new one soon...

To make me forgive, I'm going to puts in free download the Commodore soundbank
http://www.payloadz.com/d1/?id=2687208

Thanks to Tomislav Zlatic and Bedroom Producer Blog for these sounds
http://bedroomproducersblog.com/free-samples/

chopen · Post by **chopen** » Thu Aug 14, 2014 6:42 pm

This the improvements check list of the day

Update 1.928 :

Fix bug to Load 'link delay n°4.

Fix bug to the 16th slot in inverse mode play looped.

Functions 'Import sample parameters' et 'Export sample parameters' are now operationals for VibratoR and TremoleX (Management of all the parameters).

Improvement of the reset functions for TremoleX and VibratoR modules.

For updating the patchs of all EcolooP instruments downloaded to the Midi mobiles blog (when there's a big update of EcolooP), you can now download one only file which you can put in your EcolooP instruments directory here :

EcolooP Instruments Patchs :
https://dl.dropboxusercontent.com/u/298 ... Patchs.rar

See U later

chopen · Post by **chopen** » Thu Aug 14, 2014 7:19 pm

Please stand a little time for the update of all patch. The file is downloaded but not yet ready for the 1.928 version. For the new user it's better to download this file because we are not obliged to make the effort to download the updates of all the patches for all the separate soundbanks. It is just a pure formality !

Some bugs were even detected recently concerning the saving of vibrator data.

I correct it this night and from tomorrow, I affect the part dedicated to the tutoriels and demonstration's video...

I would like tried well more plugins of KVRDC's challenger but it could damage my love life !

chopen · Post by **chopen** » Fri Aug 15, 2014 2:18 pm

Soon in your screen !

chopen · Post by **chopen** » Fri Aug 15, 2014 5:22 pm

There will be soon of better videos. I make my first steps on CAM studio in my laptop computer. I'll put the sound next one...

http://youtu.be/ILRrQZSiR-M

It's no good. But you can see how load an instrument Kit .fxp (see to my blog for this)

chopen · Post by **chopen** » Mon Aug 18, 2014 2:51 pm

Update 1.929

Revision of the internal core

Improvements of delay modules (fewer crackles when we move controls)

Optimsation CPU / PERFORMANCES

Optimisation to improve the consumption CPU in the starting up of EcolooP (less risk of crash)

I'm already work in 1.930 version for the revision of Load/Save - Import/Export data parameters.
I found another way of making more economic. EcolooP will soon be even lighter and more quick for the launch...
Too bad for tutoriels at the moment. Sorry ! I work very hard for arrive to make it before the end of the KVRDC14

If you have some problem for the view of the waveform, It's because tou need to install a package Miscrosoft Visual C++ (maybe 2008 redistributable or 2013)...

chopen · Post by **chopen** » Tue Aug 19, 2014 11:07 am

Saddened for the faults of ortographes. I try to correct me so that you have a better understanding of what I'm doing in real time !

bob bobwood · Post by **bob bobwood** » Tue Aug 19, 2014 8:08 pm

sorry, edited. should have been a pm. Sent.

chopen · Post by **chopen** » Wed Aug 20, 2014 8:59 am

Thanks to you, I have just corrected the foreword. In priority, If somebody can verify what I wrote in the EcolooP KVR page, it would be very nice !

chopen · Post by **chopen** » Wed Aug 20, 2014 9:34 am

I finally managed to make an attachment. This is the user manual...

It is an appendix to the user manual !

chopen · Post by **chopen** » Wed Aug 20, 2014 7:49 pm

I have just compiled a new version of EcolooP Island 1.930 to improve the performances CPU (especially for the launch of the plugins) and correct correct about little gifts.

Update 1.930 :

Correction of triggers in the list 'menu'

Revision of ' Data sample parameters ' and reduction of the internal assembly

Remove of 'Load All Data Sample Parameter' (too heavy)

Blocking of the files creation (.sam/.ads) at the launch of the plugins

Reset sample parameter puts 0 on 'to Master'

I think It's the moment to turn to serious matters...
I have new sound bank from the KVRDC14 compiled for EcolooP and I go to see what I can make with the KVRDC14 soundbank editors

See U tomorrow

chopen · Post by **chopen** » Thu Aug 21, 2014 4:40 pm

I finally had time to update the patches of the sound banks from in my blog. Download this if you want update the instrument with the new version of EcolooP :
https://dl.dropboxusercontent.com/u/298 ... Patchs.rar

As well as EcolooPStartKit :
https://dl.dropboxusercontent.com/u/298 ... artKit.rar

Enjoy !

Normally, there is not problem anymore with the Savings and the Load of .sam and .ads files for the saving performance in an only slot

All this is only an extension to the basic program but can constitute a not insignificant surplus for the choice of a new sampler like EcolooP

I do not have more than to prepare video and audio demonstrations of my project.
I hope that the KVRDC14 will last another additional week to be all able to realize them

EcolooP Support for the KVRDC14