60s Skins for Tyrell ... only a remix so far
-
- KVRer
- Topic Starter
- 14 posts since 12 Apr, 2008
Hello,
i like Tyrell and things u-he presents - not just the product itself, also the service or/and things like integrated editor. Me, who like to work with both audio and graphics, realy welcome this feature!
First i looked for another skin i think the GUI made Branis was the first i liked and used well.
Have only made some small expierence with GUI work yet. But i thought i would give tyrell a try. I liked also the GUI made by braj and picked this up maybe cause it had already the orange line on that knobs - havn't found a way / product to create those knobs automatically.
Here is preview of one my small editions - from the GUI made/based by Branis & braj. Not finished but don't want do a complete rework..
I | dark wood
II | grey wood
Made some small changes. Also added a dot for the brown noise even if i'm not sure if this is correct.
Hope once i got full permission and i would upload you might like to use one* of my Remix GUI!?
* Made some small variations with the wood.
Constructive criticism is welcome.
Update:
Ok here is the first release.
bittersweet & lavender
bittersweet & lavender (Preview)
bittersweet & lavender (Data)
Greets bluemoon
i like Tyrell and things u-he presents - not just the product itself, also the service or/and things like integrated editor. Me, who like to work with both audio and graphics, realy welcome this feature!
First i looked for another skin i think the GUI made Branis was the first i liked and used well.
Have only made some small expierence with GUI work yet. But i thought i would give tyrell a try. I liked also the GUI made by braj and picked this up maybe cause it had already the orange line on that knobs - havn't found a way / product to create those knobs automatically.
Here is preview of one my small editions - from the GUI made/based by Branis & braj. Not finished but don't want do a complete rework..
I | dark wood
II | grey wood
Made some small changes. Also added a dot for the brown noise even if i'm not sure if this is correct.
Hope once i got full permission and i would upload you might like to use one* of my Remix GUI!?
* Made some small variations with the wood.
Constructive criticism is welcome.
Update:
Ok here is the first release.
bittersweet & lavender
bittersweet & lavender (Preview)
bittersweet & lavender (Data)
Greets bluemoon
Last edited by bluemoonone on Mon Apr 09, 2012 12:46 am, edited 6 times in total.
-
- KVRer
- Topic Starter
- 14 posts since 12 Apr, 2008
Yes you should see at 100% - the (big) image is included but get resized by the forumsoftware. However i added a link (and another image).
Greets bluemoon
Greets bluemoon
-
- KVRian
- 527 posts since 12 Dec, 2007 from Belgium
If you drag the image into your adres bar you get a 100% view.
Very nice work! I haven't tried it yet, but this could be a perfect alternative to the 70's skin. Like it a lot!
Very nice work! I haven't tried it yet, but this could be a perfect alternative to the 70's skin. Like it a lot!
-
- KVRer
- Topic Starter
- 14 posts since 12 Apr, 2008
Thanks Polybius,
the links should work now.
Would like to release it soon but waiting for permission. If i found a knobmaker i think i'm gonna rework them. And i've you have an idea for improvements i like to hear them. I don't gonna make promises that i'll make big improvements with this GUI. Even if i'm very interesting on completly replace all panels - want more space. But don't no know how much work it would be.
Greets,
bluemoon
the links should work now.
Would like to release it soon but waiting for permission. If i found a knobmaker i think i'm gonna rework them. And i've you have an idea for improvements i like to hear them. I don't gonna make promises that i'll make big improvements with this GUI. Even if i'm very interesting on completly replace all panels - want more space. But don't no know how much work it would be.
Greets,
bluemoon
- KVRian
- 921 posts since 14 Oct, 2002 from Sweden
Skinning Tools:bluemoonone wrote:If i found a knobmaker i think i'm gonna rework them.
KnobMan
SkinMan
+ a decent graphics editor (PhotoShop, PaintShop etc.)
I'd wait for Urs' new resize algorithm.bluemoonone wrote:Even if i'm very interesting on completly replace all panels - want more space. But don't no know how much work it would be.
And yeah, it'll be some work.
-
- KVRist
- 120 posts since 6 Apr, 2011
I like the colors in both interfaces and the wood textures. I just don't like the Tyrell logo. It's a bad font for my taste, I guess (and I don't think you need to put the "v2" beside - just my opinion).
On your first interface I can hardly read the "chorus" at the bottom.
And if I had a choice I'd probably remove that quote (maybe you could make a version without it).
On your first interface I can hardly read the "chorus" at the bottom.
And if I had a choice I'd probably remove that quote (maybe you could make a version without it).
- KVRAF
- 2841 posts since 23 Feb, 2004 from Planet Earth...for now
Both your links go to Darkwood - fixed in my quotebluemoonone wrote:Hello,
i like Tyrell and things u-he presents - not just the product itself, also the service or/and things like integrated editor. Me, who like to work with both audio and graphics, realy welcome this feature!
First i looked for another skin i think the GUI made Branis was the first i liked and used well.
Have only made some small expierence with GUI work yet. But i thought i would give tyrell a try. I liked also the GUI made by braj and picked this up maybe cause it had already the orange line on that knobs - havn't found a way / product to create those knobs automatically.
Here is preview of one my small editions - from the GUI made/based by Branis & braj. Not finished but don't want do a complete rework..
I | dark wood
II | grey wood
Made some small changes. Also added a dot for the brown noise even if i'm not sure if this is correct.
Hope once i got full permission and i would upload you might like to use one* of my Remix GUI!?
* Made some small variations with the wood.
Constructive criticism is welcome.
Greets bluemoon
+1 on everything hebb just said, and I'd add that it's be nice it the knobs popped a little more against the dark background - maybe lighten that background a tad?
- KVRAF
- 4864 posts since 19 Apr, 2002 from Utah
Cool! Thanks!!!
--Sean
--Sean
C/R, dongles & other intrusive copy protection equals less-control & more-hassle for consumers. Company gone-can’t authorize. Limit to # of auths. Instability-ie PACE. Forced internet auths. THE HONEST ARE HASSLED, NOT THE PIRATES.
-
- KVRer
- Topic Starter
- 14 posts since 12 Apr, 2008
Thanks to all for your feedback and help.
But first of all (if i would make complete GUI Rework) i have to know how to get a bigger editor screen.
Yes Logo for tyrell was bad - hope now it's better. Chorus was bad to read - would fix it..
Hm not sure about removing that quote.
Oh and i fixed the link - and thanks for fullquote*
Greets,
bluemoon
* just kidding
I'll check out Knob Man. Where can i get more information about the new algorithm? when will it be released. I rearranged the whole panels now except of the "preset panel". It was not fun as some objects that are linked with each others.. it is/was like playing extended memorynBeat wrote:Skinning Tools:bluemoonone wrote:If i found a knobmaker i think i'm gonna rework them.
KnobMan
SkinMan
+ a decent graphics editor (PhotoShop, PaintShop etc.)I'd wait for Urs' new resize algorithm.bluemoonone wrote:Even if i'm very interesting on completly replace all panels - want more space. But don't no know how much work it would be.
And yeah, it'll be some work.
But first of all (if i would make complete GUI Rework) i have to know how to get a bigger editor screen.
Ok. I nearly lost Version 1 but i could try to recreate it (only Panelcoloring is missing).hebb wrote:I like the colors in both interfaces and the wood textures. I just don't like the Tyrell logo. It's a bad font for my taste, I guess (and I don't think you need to put the "v2" beside - just my opinion).
On your first interface I can hardly read the "chorus" at the bottom.
And if I had a choice I'd probably remove that quote (maybe you could make a version without it).
Yes Logo for tyrell was bad - hope now it's better. Chorus was bad to read - would fix it..
Hm not sure about removing that quote.
It's on the update list - i think 'll make them as bright as the faders.1-2-Many wrote:+1 on everything hebb just said, and I'd add that it's be nice it the knobs popped a little more against the dark background - maybe lighten that background a tad?
Oh and i fixed the link - and thanks for fullquote*
Thanks for what?audiojunkie wrote:Cool! Thanks!!!
--Sean
Greets,
bluemoon
* just kidding
-
- KVRer
- Topic Starter
- 14 posts since 12 Apr, 2008
Update:
Ok here is the first release.
bittersweet & lavender
bittersweet & lavender (Preview)
bittersweet & lavender (Data)
Greets bluemoon
Ok here is the first release.
bittersweet & lavender
bittersweet & lavender (Preview)
bittersweet & lavender (Data)
Greets bluemoon