Samplemoog doesn't support program changes I think. You will have to make separate V-Machine presets for each sound you want to have loaded, then use that.

I think using program changes was explained in the manual.

Very thanks for the answer.
I want to install Sonik Synth 2,do you know if it have the same problem?

I would like to know if you have the wizard files to run FM7,Korg M1 and legacy collection,I've read in this forum that some people can run it perfectly on the v-machine.Can you send me please?.
Very Thanks from Spain.
Sorry for my bad English.

I don't know about Sonik Synth 2.

I don't have those wizards for FM7 and KLC, I'm very much looking after the wizards for KLC myself.

Some of the Korg stuff used to run, but no longer does with the current vmachine firmware. People have said otherwise, but don't want to explain how they did it. Forget about any of the Native instruments stuff, too.

the manual leaves a lot to be desired...




b.t.w.: interesting that people moan so much about the missing CPU upgrade, while I think the cpu really is the smallest problem with V-Machine... loading times is a much bigger issue for me... the manual promises, that after tzhe intial loading of a preset the subsequent loading times would be significantly shorter, while at least on my machine that totally isn't true. I don't really use any samples, so all the plugins I use should fit easily into RAM, yet it appears they get thrown out whenever I switch to a preset that doesn't use them... why is there (after all these years) no option to keep them in RAM? Did people never complain about loading times? What do they use V-Machine for?

I really have a hard time to switch in time. In fact the loading is terribly slow.
That, ladies and gentlemen, is a serious issue for me.

On the other hand I can run EP+Reverb+Compressor+Chorus@32samples without the slightest glitch.

I guess your master keyboard is sending a bank change message in front of the actual program change (some masterkeyboards do). Unfortunately bank change response can't be switched off in the V-Machine (at least as far as I can remember), so either you have to switch it off in the master keyboard or set it to the wanted bank number.


MIDI feedback works well here. But you have to know that it only works with parameters that have been learned with VFX or the V-Machine. In the controller device you have to make sure that usb is two-way, so that it also receives MIDI data from the V-Machine.

Hi there!

If anyone is interested, here is my wizard file for Aurturia's free Minimoog V Original :

id: 5065038
name: Minimoog V Original
version: 1
name_abbreviation: Mini
dll_name: Minimoog V Original/minimoog V Original.dll
parameter_count: 48
program_count: 1
is_synth: 1
has_editor: 1
editor_width: 1016
editor_height: 605


files_to_copy:
...

C:/Synth/Arturia/minimoog V Original/Minimoog Original.prefs


dirs_to_copy:
...

C:/Synth/Arturia/minimoog V Original/autoload
C:/Synth/Arturia/minimoog V Original/control
C:/Synth/Arturia/minimoog V Original/save

...
registry_keys:
...
REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Arturia\minimoog V]
"installdir"="p:\\minimoog V Original\\Minimoog V Original"

This works on my V-Machine.
Hope you can use this too.

Regards,
hetyus

In arturia's free Minimoog V Original I can't change patch in my V-Machine and in VFX. Any one has 100% working this plug?

Hi,

as far as i know patch change doesn't work in any Arturia plugins, because they don't use the internal patch system of the vsti standard (i think vsti standard patch system is limited to 64 (or 128?) patches).

You'll need special midi messages to change bank and program;

[ http://www.arturia.com/evolution/kb/?View=entry&EntryID=105 ] (http://www.arturia.com/evolution/kb/?View=entry&EntryID=105)

Or you can save individual presets in the VFX software for each patch you want to use.

Regards,
hetyus

AUTO-ADMIN: Non-MP3 links have been disabled in this post automatically. Once the member reaches 5 posts the links will become clickable.

This is not up to VST standard, but rather MIDI standard. 128 patches per bank, and you can have up to 16384 banks (using Bank Select messages - CC0 for MSB and CC32 for LSB - before sending the actual program change).

Hi,

For all our customers with a V-Machine......

Today we've released TruePianos Lite for the SM Pro Audio V-Machine. TruePianos Lite includes highly optimized single preset versions of the Amber, Sapphire, Diamond and Emerald modules made from scratch specifically with the V-Machine hardware in mind.

These great performing pianos are available from the customer area of our website.

---
Roel / 4Front Technologies
http://www.truepianos.com/

Thx a lot, for piano i use your (old) lite modul for playing with my vmachine. will try the new other moduls !

thanx hetyus... I use Alesis Photon 25 and it changes program and bank in some other plugs but not works in Minimoog V Original or Synth1. Does work change program in Minimoog V Original with VM? Maybe its problem with my midi controler.

No, it's up to the plugin if it supports program changes or not!

Roel de Witt wrote:

Hi,

For all our customers with a V-Machine......

Today we've released TruePianos Lite for the SM Pro Audio V-Machine. TruePianos Lite includes highly optimized single preset versions of the Amber, Sapphire, Diamond and Emerald modules made from scratch specifically with the V-Machine hardware in mind.

These great performing pianos are available from the customer area of our website.

---
Roel / 4Front Technologies
http://www.truepianos.com/

Could you explain us how can I get it?