Ok, thanks i'll try this.

Got it now. Took some reinstalling (1.52 version) but all is good!

Excellent..
Glad to hear it's working

SOUNDS GREAT!!!!!

Update!!
Vas Browser 3.31


Thanks to Amit for continuing to Update the Browser
Inside the Zip you will find VAS_BROWSER.hta
please copy the file to your installed headcase/UserScripts
folder overwriting the older version


once installed in the UserScripts folder double click on the file to launch


the browser checks to find out what amps you have installed so you are not installing multiple copys of the same amp
there is more information on the amp within the more info section as seen in the image below

Categorys can be chosen from the drop down menu on the left or you can chose to goto the stash or ampskindesigns from the buttons

when you find an amp you would like to try select the install button





Download
Vas Browser 3.3.1

Built in England
Great Amps back in the days of Glam Metal
Bon-jovi Endorsed and Used KMD
KMD is no longer around they were discontinued
so if you into Charvel, Jackson,Kramer or Hammer Guitars
Give it a spin:)



Thanks Must go out to Jac ( MMJ ) for completing the Amp !



Cheers
S1770

A little info from the creator.

it's quite different sounding than your everyday head. more on fuzzed/muffed side.

warning: This is no metalhead

below is info from it's about file:
************************************************************ ************************************
#AmpName: Cubano

#ToneTags: Rock,Dirty,Fizzy,Fuzzy,Muffy,Sweet Harmonics, Santana'ish

#Author: Amit Talwar

#Cabs : MIMIC (internal) or use less Pres Cabs, filtercabs

#Description: A Dirty and Fizzy/Fuzyy Head. A Bit in Santana territory and bit in iommi's.

#Tips:
1. This has got a lot of high fizz. you'll have to tame that using cut knob or external eq
2. Ths Head is Primariily for very warm leads kinda sounds, close to a reed sounds. Specially with less attack.
3. A good deal of compresson followed by a fluid delay is just about the perfect setup for this head.
4. may not work very well with high treble/pres Ir's.
5. To Some it may sound as if there is no cab attached (and that is sort of sound i am after), like a wet speaker cone cut with blunt knife blades and abused with beer.
6. Pres Knob at lower settings changes tonality . A happy accident
7.Use Guitars Volume Control with this Head to clean up.
8.This is a noisy head to bear than in mind.
9. This is a head with over abundant harmonics and filth, so if that's not your type it'll be crap to your ears.
10. Use the Level knob to control tightness. Lower Values (up to 35%) yield fatter tones and anything above makes for chunkier.
11. The curves give more or less unbiased (tubes) feel to it loathed with gain.
12. Use Filtercabs for mellower santanaland tones.

S1770

New!!Prepurchasers, Head Case builder 1.54 with MIDI control, Locking knobs/switches, and External App integration released at the private pre-purchasers beta forum.




S1770

Here is a tweaked and revoiced cupernicus. I think I got it to sound what i wanted to (dirt).
It should be little more beefier in builder.
(this is not the same head as the cupernicus VM - the golden/yellow one) Update to Cupernicus : VM will come in few days after having it run it through more tests.

Below is info from the contents file:
#AmpName: Cupernicus II : The Dirty Fella X2

#ToneTags: Blues,Hard Rock, Classic Rock,Heavy Metal,Clean,Bassy

#Author: Amit Talwar

#Cabs : MIMIC, ToneVampire, Kalthalen etc.

#DateOrigin: July 16 2012
#DateCurrent: July 16 2012

#Description: Cupernicus is an amp Primarily based on external Tube Curves (likely from Rockaxe). This Started as a Clean amp and then I added Dirt Channel.
This Dirt Channels are very Bass/ Low Heavy (this is by design) you you should dial the low/bass knob down to control the rumble.
X2 version is an update on previous version and this i have been able to get the tone i wanted in the first place. X2 Version was designed with my Duncan Distortion pickup in a korina/limba body guitar (bit on bright side).

The Dirt Channel does not have a Mid Knob, Use Post Eq or try Different cabs for flavoring.


#Tips:
1. For Starters Keep Master Volume around 50% and then work your way through It.
2. Dial the bottom down on dirt channel, its got extra bass for some ir's.
3. Needless to say like my most other amps, The Combination if the Gain and the Level knob with form your basic tone. More Level = More Chunkier tone with string clarity and bite. Level around 40% will be more like a fluid tone (more warm rounded tone)
compensate volume levels with master knob or cab level after setting up gain and level pair.
4. a Compressor after clean is more or less compulsary unless you are a very even picker.
5. Stomps have be tweaked to different tonaliy. give them a shot if you looking for some change.
6. I am not certain about the channel volume levels overall as well as when switching between one another so , i'd suggest you tweak those to you liking in builder.

Enjoy!
~amit

S1770

Both the Ampskindesigns.com and Virtualampstash.com sites have undergone changes
with new areas available from the side menu's

The changes will be ongoing as we add additional Content.

Headcase 1.53 Lite can be downloaded from the links onsite
before commencing your installation of Click and read " Headcase Installation Please Read"




Enjoy testing Headcase the Amps & the Site

http://www.virtualampstash.com

S1770

JACK LEE ( inspired by the Metaltronix m-1000 1.0 - MMJ



Enjoy
S1770

Info from PVDHP

if you want better sound, put PreEQ.wav with impulser before HC

PreEQ.wav IR

http://dl.dropbox.com/u/81719608/PVDHP/PreEQ.wav



Thankyou to PVDHP for submitting his creation to vas
Thankyou to Darth Vader for Creating the skin:)

Great work guys:)

S1770

ENDL HEY430-Ver 2.0 - PVDHP

Information from the Author PVDHP

if you want better sound, put PreEQ.wav with impulser before HC

http://dl.dropbox.com/u/81719608/PVDHP/PreEQNew.wav



Enjoy

S1770

KREAMTONE-NOVA-MXB-1



KREAMTONE-NOVA-1



Description from about File:


#AmpName: Kreamtone Series - NOVA (+MOD XB)

#ToneTags: Blues,Clean,Light Rock,Jazz,Funk,Soft Rock,Slow Blues

#Author: Amit Talwar

#Cabs : MIMIC (internal) or use as suitable (try redwirez AC30 or showman Ir's for Some classic tones)

#Description: A Derivative of PAMP Emperic. This head is mostly for very starightforward dull clean tones, and can be driven with other stomps for some distorted flavors.

#Tips:
1: Use internal stomps Nose Drive and skull for overdrive
2: due to being clean and mainly playing dynamics it recommended to either use internal limiter or use compressor after it to tame any clipping.
3: This amp should give you good variety with the pickup combinations you have at your disposal thus giving you more natural tone of your guitar.
4: More Heads Will come in Kreamtone Series with Different curves(Tubes) and Character Soon.
5: There are No Tubes(Curves) in Pre-Amp Stage.
6: Works well with simulanalog ds-1 and sd2 stomps as well as Ts for OD tone
7: Throw in some ambient reverb, load some slow bluez/smooth jazz track and be done for the remaining hours of the day/night!
8: The MOD:XB version is basically extra brite version with tight HP filter and different compression and some tone stack tweaks. I use it for a different flavor with my guitar that's a bit dull.
7: These Heads should sound bit better with single coils / humbucker coil taps.
8: For Some good blues fun try the Ambience Plugin with Paddy Guitar JeeHaaa Preset. Ambience can be downloaded from http://magnus.smartelectronix.com/

S1770

In this Video crated by Guitarist Henky backer
Henky displays the use of Headcase


http://youtu.be/7F1K8EJoWC4

Enjoy the Video , call by his channel to say hello

http://www.youtube.com/user/HenkyBacker/videos

S1770

__________________