Console emulation plugins = necessary?
- KVRAF
- 16376 posts since 22 Nov, 2000 from Southern California
Transients-wise, it's analog for drums, guitars, or synth leads, digital for vocals, bass, and pads. That's if we're generalizing here.
When tape was first getting phased out in the 90's, most of us understood that each medium had its place. For someone to make any kind of sweeping statement in either direction, when we can all so easily now have both, is amateurish.
When tape was first getting phased out in the 90's, most of us understood that each medium had its place. For someone to make any kind of sweeping statement in either direction, when we can all so easily now have both, is amateurish.
-
- KVRian
- 676 posts since 24 May, 2011 from los angeles
honestly if you want one try one i notice when i mix with one I get my mix done faster with less fx then without and it sounds alot better. also its use is less than stellar on a already mixed song.
-
- KVRAF
- 10260 posts since 19 Feb, 2004 from Paris
Not necessary for me.@midnight wrote:Feeling a little insecure over here with my lack of proper console emu
What say you? Are these things necessary to get great sounding mixes ITB?
What difference have they made for you?
But they are an option, and if it works for you, then its ok. I almost never use them. There's no evidence that one would like to sound exactly like old records, IF these plugs would recreate exactly this, and in this precise case the best thing might be to record like they did in the good old times : Mono drums, mixdown on big tape recorder etc, and/or also use proper preamps, mikes etc etc.
There's no evidence either that all projects should benefit of such a treatment imho. Its up to everyone to decide that. However, I often use a real physical mixdesk, but its an hybrid analog/digital thing, so not really a good old Neve.
Maybe its a bit like these jeans that you can buy artificially used ?
LtZ
http://www.lelotusbleu.fr Synth Presets
77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there
77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there
-
- KVRian
- 1099 posts since 30 Oct, 2005
I hope you are talking about real analog hardware here /and not that analog-like digital nonsense/Uncle E wrote:Transients-wise, it's analog for drums, guitars, or synth leads, digital for vocals, bass, and pads. That's if we're generalizing here.
When tape was first getting phased out in the 90's, most of us understood that each medium had its place. For someone to make any kind of sweeping statement in either direction, when we can all so easily now have both, is amateurish.
because frequently the main difference between real analog and any "analog" emu is in transient handling...
-
- KVRAF
- 1782 posts since 4 Sep, 2011 from England
My music sounds better with Slate VCC and VTM on, more interesting than they do off and less EQ is needed to get the mix right. Trust your ears and not statements or opinions.
-
- KVRAF
- 14658 posts since 19 Oct, 2003 from Berlin, Germany
In all honesty?@midnight wrote:What say you? Are these things necessary to get great sounding mixes ITB?
What difference have they made for you?
These things are (IMO) not necessary to get a great sounding mix ITB - especially if you know how to use the right metering tools. But they can clearly help you get there.
The best thing these "console" emulations did, and this is certainly also thanks to Steven Slate, is to teach you how it should be done in the best way possible.
Like a merge of "old days mixing" with "current days mixing", but sans the overcompression, however without the weaknesses of the gear from yesteryear (noise, maintenance, etc).
Example:
Plugins with a reference level of -18dBFS are nothing new. They're actually around for quite a while now. But barely anyone knew that. So the time the switch from analog realm to digital realm was performed (80ies and 90ies), people were like "let's break the limits" - and this is the case up until today.
Now let's go back a couple of years with the release of Nebula and the first console type plugins. Suddenly, a so called "reference level" was the anchor point in production again. Yet people still think "it doesn't matter, we have a 32bit float mixing engine - we can do what we want".
However - what tools like VCC and also SATSON did right, was teaching people how to use their equipment. Telling them what worklevels are, where the hotspots reside and how to get everything out of your equipment with less hassle as possible. And I don't need to think about cleaning fader's or poti's, checking PSU's, taking care of noise from electronic parts, etc.
That they also add mojo to your signal is another sideeffect, but this can either be good (if done delicately) or absolute terrible (if overdone). So instead of going too loud these days, people need to learn how to work more delicate rather than overdoing things as well.
For me this made a great difference.
I use less compressors (though EQ is still essential!), since the introduction of EBU R-128 even just one or two different limiters. And that while (pre)mastering only. I have no trouble integrating my hardware with my DAW or the other way around, I have a healthy worklevel while still having an excellent fader resolution.
If these things (console emulations) do anything right, then it's teaching us how to use a console, and how metering should be done.
It's not about getting a certain console sound.
- KVRian
- 910 posts since 21 Aug, 2011
Compyfox wrote: Plugins with a reference level of -18dBFS are nothing new. They're actually around for quite a while now. But barely anyone knew that. So the time the switch from analog realm to digital realm was performed (80ies and 90ies), people were like "let's break the limits" - and this is the case up until today.
Now let's go back a couple of years with the release of Nebula and the first console type plugins. Suddenly, a so called "reference level" was the anchor point in production again. Yet people still think "it doesn't matter, we have a 32bit float mixing engine - we can do what we want".
However - what tools like VCC and also SATSON did right, was teaching people how to use their equipment. Telling them what worklevels are, where the hotspots reside and how to get everything out of your equipment with less hassle as possible. And I don't need to think about cleaning fader's or poti's, checking PSU's, taking care of noise from electronic parts, etc.
If these things (console emulations) do anything right, then it's teaching us how to use a console, and how metering should be done.
It's not about getting a certain console sound.
This is absolutely right, and it's really just this simple. What these tools allow are for proper "virtual" calibration and metering and gain staging with reference to the tools your using - reverbs, delays, compression, whatever. It's not about a sound per se, it's more about setup and workflow, etc.
-
- KVRAF
- 6425 posts since 22 Jan, 2005 from Sweden
I don't agree one bit - it's all about the sound you gain.Phase47 wrote:Compyfox wrote: Plugins with a reference level of -18dBFS are nothing new. They're actually around for quite a while now. But barely anyone knew that. So the time the switch from analog realm to digital realm was performed (80ies and 90ies), people were like "let's break the limits" - and this is the case up until today.
Now let's go back a couple of years with the release of Nebula and the first console type plugins. Suddenly, a so called "reference level" was the anchor point in production again. Yet people still think "it doesn't matter, we have a 32bit float mixing engine - we can do what we want".
However - what tools like VCC and also SATSON did right, was teaching people how to use their equipment. Telling them what worklevels are, where the hotspots reside and how to get everything out of your equipment with less hassle as possible. And I don't need to think about cleaning fader's or poti's, checking PSU's, taking care of noise from electronic parts, etc.
If these things (console emulations) do anything right, then it's teaching us how to use a console, and how metering should be done.
It's not about getting a certain console sound.
This is absolutely right, and it's really just this simple. What these tools allow are for proper "virtual" calibration and metering and gain staging with reference to the tools your using - reverbs, delays, compression, whatever. It's not about a sound per se, it's more about setup and workflow, etc.
Talk about workflow with these plugins - it's not close. No daws are built for these formats.
I think Cakewalk might be on the path of building a standard for console like workflow with their Pro Channel. Plugins created for a certain format that also fits the gui of the daw.
Add a touchscreen and you almost there as with a physicals console.
You might learn about levels and sweetspots as well - but cannot agree on that it's not about the sound. It's all about the sound.
-
- KVRAF
- 14658 posts since 19 Oct, 2003 from Berlin, Germany
Then you obviously haven't seen the "Imperial White" skin for Reaper, Cubase 7's new mixing console and especially the new RAVEN MTX Console by SLATE Pro Audio.
Also, Harrison Mixbus to a certain extend - if that system wouldn't be so buggy.
Of course it's about the sound as well. But this shouldn't be due to analog modeling devices as "only solution" to get there.
Also, Harrison Mixbus to a certain extend - if that system wouldn't be so buggy.
Of course it's about the sound as well. But this shouldn't be due to analog modeling devices as "only solution" to get there.
-
- KVRAF
- Topic Starter
- 1580 posts since 22 Apr, 2011 from The House of Zaid
I'm just wonderinng about how these changes the sound
To me I feel ithey present you with a different "snapshot" of the mix, not necessarily better or worse, just a slightly different sound then what you heard before, making you think its "better" (it may or may not actually be)
Its sort of like taking some of the control out of your own hand, in a way
To me I feel ithey present you with a different "snapshot" of the mix, not necessarily better or worse, just a slightly different sound then what you heard before, making you think its "better" (it may or may not actually be)
Its sort of like taking some of the control out of your own hand, in a way
Has anybody ever really been far even as decided to use even go want to do look more like?
-
- KVRAF
- 6425 posts since 22 Jan, 2005 from Sweden
Thanks for the tip - I never bothered with alternate skins for Reaper yet.Compyfox wrote:Then you obviously haven't seen the "Imperial White" skin for Reaper, Cubase 7's new mixing console and especially the new RAVEN MTX Console by SLATE Pro Audio.
Also, Harrison Mixbus to a certain extend - if that system wouldn't be so buggy.
I checked Harrison out as well - from a link at Reaper forum.
Been looking at the external stuff from Mackie Universal-something. But it's darned expensive.
I'm thinking of a second monitor - touchscreen , right in front of the normal but in 30 degree angle or something like that.
Then place Reaper mixer floating on that monitor.
I think it might be cool and close to physical thingy.
- KVRAF
- 16376 posts since 22 Nov, 2000 from Southern California
The following analog emulation plug-ins have dramatic impacts on transients:kvaca wrote:I hope you are talking about real analog hardware here /and not that analog-like digital nonsense/
because frequently the main difference between real analog and any "analog" emu is in transient handling...
UAD-2 Ampex
UAD-2 Studer
Slate VCC RC
URS Saturation
-
- KVRian
- 1099 posts since 30 Oct, 2005
good to know...Uncle E wrote:The following analog emulation plug-ins have dramatic impacts on transients:kvaca wrote:I hope you are talking about real analog hardware here /and not that analog-like digital nonsense/
because frequently the main difference between real analog and any "analog" emu is in transient handling...
UAD-2 Ampex
UAD-2 Studer
Slate VCC RC
URS Saturation
but it looks like you have intentionally mentioned dongled plugins which cannot be demoed easily - are there any "normal" ones?
- KVRAF
- 16376 posts since 22 Nov, 2000 from Southern California
Try the Waves REDD and NLS.kvaca wrote:but it looks like you have intentionally mentioned dongled plugins which cannot be demoed easily - are there any "normal" ones?