Great song, man! Sounds really nice! ;=)Beerhunter wrote:Hey guys,
i am happy to announce that the latest project i was working on, is now finished.
I guess all in all i did spend 4 or 6 month on it, rearranging, improving, messing around with latency problems etc., notice, i did not work full-time on it. I thought it would be nice to share it with you, so beside the package stuff there is sth. more .
https://soundcloud.com/ustudio/auron
greetings
B
Latest News: Bitwig updates Bitwig Studio to v5.1
HowTo: Bitwig Studio RPM
-
- KVRist
- Topic Starter
- 116 posts since 27 Mar, 2014
-
- KVRist
- Topic Starter
- 116 posts since 27 Mar, 2014
Yeah, it's gonna be impossible to get closed source software into those repos. Maybe rpmfusion. And, then again, there are personal repos for users in https://copr.fedoraproject.org/
Also, the http://rpmfusion.org/FedoraThirdPartyRepos site is a list of compatible repos.
Also, the http://rpmfusion.org/FedoraThirdPartyRepos site is a list of compatible repos.
-
- KVRian
- 509 posts since 5 Apr, 2014
@ Renich, thanks dude. I´ll try to get the RPM´s of Bitwig in there.
i´m srry i missed the RC of 1.1.3, so here we go, check out the link below for 1.1.3Rc1 of Bitwig.
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
greetings
i´m srry i missed the RC of 1.1.3, so here we go, check out the link below for 1.1.3Rc1 of Bitwig.
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
greetings
-
- KVRian
- 509 posts since 5 Apr, 2014
@Renich
maybe i´m wrong but Bitwig is proprietary Software, so Fedora will not allow it......or are the user repos not affected by the rules they mentioned on the page ?
maybe i´m wrong but Bitwig is proprietary Software, so Fedora will not allow it......or are the user repos not affected by the rules they mentioned on the page ?
-
- KVRist
- Topic Starter
- 116 posts since 27 Mar, 2014
rpmfusion, as far as I know, is a "gray zone" repo. Then, the russian repo is totally out of the rules. There are a ton of 3rd party repos that allow this as well.
But, rpmfusion, being the most "official" distributes steam, which is not, to my knowledge, free software. I'd try rpmfusion first.
But, rpmfusion, being the most "official" distributes steam, which is not, to my knowledge, free software. I'd try rpmfusion first.
-
- KVRian
- 509 posts since 5 Apr, 2014
@ Renich,
well i tried the RPM-Fusion page, but i didn´t quiet get how to upload the package, maybe i was just dumb....?! :/
greetings
B
Enjoy your holidays, X-mas and New Years Eve (NYE, which sounds to me like the german Nie, which would be the meaning of never in english just joking)
well i tried the RPM-Fusion page, but i didn´t quiet get how to upload the package, maybe i was just dumb....?! :/
greetings
B
Enjoy your holidays, X-mas and New Years Eve (NYE, which sounds to me like the german Nie, which would be the meaning of never in english just joking)
-
- KVRist
- Topic Starter
- 116 posts since 27 Mar, 2014
-
- KVRian
- 509 posts since 5 Apr, 2014
@ Renich, thank you i´ll try ot get it working.
by the way version 1.1.3RC2 is available the link below as usual.
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
by the way version 1.1.3RC2 is available the link below as usual.
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
-
- KVRian
- 509 posts since 5 Apr, 2014
guys, say "Hello" to version 1.1.3 of Bitwig
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
.... sometimes i start wondering if the Bitwig Team sleeps or even celebrate x-mas.... anyway i like their work, and i guess for all of us x-mas came earlier this year than 24 of December ...
greetings
B
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
.... sometimes i start wondering if the Bitwig Team sleeps or even celebrate x-mas.... anyway i like their work, and i guess for all of us x-mas came earlier this year than 24 of December ...
greetings
B
-
- KVRAF
- 9132 posts since 6 Oct, 2004
Merry Christmas, RPM-ers Thanks to your efforts, one of these new releases
is working in my favorite pclinuxos, with a light and lovely E19 desktop. The new
U-he linux ports also worked. Talk about clams at high tide!
Now I just have to get it going in Puppy Studio 1337,
and figure out where the piggybank is hiding. When it saw Bitwig come up in E,
it ran off, squealing " "
is working in my favorite pclinuxos, with a light and lovely E19 desktop. The new
U-he linux ports also worked. Talk about clams at high tide!
Now I just have to get it going in Puppy Studio 1337,
and figure out where the piggybank is hiding. When it saw Bitwig come up in E,
it ran off, squealing " "
-
- KVRian
- 509 posts since 5 Apr, 2014
@ Renich
just a short question what hoster can i use for hosting the srpms for fedoracorp ? i tried mega but it does not work.. any suggestions ?
just a short question what hoster can i use for hosting the srpms for fedoracorp ? i tried mega but it does not work.. any suggestions ?
-
- KVRian
- 509 posts since 5 Apr, 2014
Hi guys,
the Bitwig Crew fixed one thing, try and find out what
https://mega.co.nz/#!lJwyBbwZ!ncMHI4u98 ... SbMjz8tU8I
greetings
the Bitwig Crew fixed one thing, try and find out what
https://mega.co.nz/#!lJwyBbwZ!ncMHI4u98 ... SbMjz8tU8I
greetings
-
- KVRian
- 509 posts since 5 Apr, 2014
hi guys,
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
the RC of Bitwig 1.1.5 is out
greetings.
https://mega.co.nz/#F!AIYzXT6R!u_XfolVkr7Nv1A_ZyrqvMw
the RC of Bitwig 1.1.5 is out
greetings.
-
- KVRian
- 509 posts since 5 Apr, 2014
the Bitwig guys are crazy before NAMM 2015, they released Bitwig 1.1.5-RC-2
as usual visit the link below.
https://mega.co.nz/#!EQIjGQIK!YbL0Lllm8 ... LjHnrnSSeU
as usual visit the link below.
https://mega.co.nz/#!EQIjGQIK!YbL0Lllm8 ... LjHnrnSSeU
-
- KVRian
- 509 posts since 5 Apr, 2014
@Renich, hope you are alright
bye the way could you maybe provide a spec file for Carla Plugin Host and Carla-Control ?
I have to say i got no knowledge how to do that... :/
thanks
B
bye the way could you maybe provide a spec file for Carla Plugin Host and Carla-Control ?
I have to say i got no knowledge how to do that... :/
thanks
B