Latest News: Bitwig updates Bitwig Studio to v5.1
APC40, APC40mkII and APCmini support is here!
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
I released version 2.1 with full Bitwig 1.1 compatibility and lots of new goodies:
APC40, APC40mkII:
- Implemented A|B buttons (on first version press Shift+RecArm) and crossfader.
- Toggle monitor and auto monitor: Shift+Mute, Shift+Solo
- Scale settings are now editable in the Preferences dialog.
- In Drum Sequencer you can now change the loop.
- The selected mode is now indicated in green.
- Quantize button is working but only if clip is already focused in editor.
- Replaced tap tempo with new native function.
- Performance increase.
- Replaced tap tempo with new native function.
- New sequencer: Raindrops
- Switching tracks remembers the last selected view (play, drum, sequencer). Also a clip on that track will be selected.
- On track change the clip at the same index as on the previous track is selected.
- Bugfix: Deactivate drum sequencer on audio track
APCmini:
- New sequencer: Raindrops
- Scale settings are now editable in the Preferences dialog.
- Preferences: Fader Ctrl, Soft Keys
- In Note and Drum Sequencer you can now change the loop.
- The selected base key for the scale is now marked green.
- Quantize button is working but only if clip is already focused in editor.
- Replaced tap tempo with new native function.
- Performance increase.
- On track change the clip at the same index as on the previous track is selected.
- Bugfix: Deactivate drum sequencer on audio track
- Bugfix: The scale base key could only be changed in play and sequencer mode.
Get them from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html
Also see the updated Wiki documentation.
Enjoy!
APC40, APC40mkII:
- Implemented A|B buttons (on first version press Shift+RecArm) and crossfader.
- Toggle monitor and auto monitor: Shift+Mute, Shift+Solo
- Scale settings are now editable in the Preferences dialog.
- In Drum Sequencer you can now change the loop.
- The selected mode is now indicated in green.
- Quantize button is working but only if clip is already focused in editor.
- Replaced tap tempo with new native function.
- Performance increase.
- Replaced tap tempo with new native function.
- New sequencer: Raindrops
- Switching tracks remembers the last selected view (play, drum, sequencer). Also a clip on that track will be selected.
- On track change the clip at the same index as on the previous track is selected.
- Bugfix: Deactivate drum sequencer on audio track
APCmini:
- New sequencer: Raindrops
- Scale settings are now editable in the Preferences dialog.
- Preferences: Fader Ctrl, Soft Keys
- In Note and Drum Sequencer you can now change the loop.
- The selected base key for the scale is now marked green.
- Quantize button is working but only if clip is already focused in editor.
- Replaced tap tempo with new native function.
- Performance increase.
- On track change the clip at the same index as on the previous track is selected.
- Bugfix: Deactivate drum sequencer on audio track
- Bugfix: The scale base key could only be changed in play and sequencer mode.
Get them from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html
Also see the updated Wiki documentation.
Enjoy!
- KVRian
- 648 posts since 20 Jul, 2009
Great!
Now what about:
- deleting clips
- tap tempo
- select different devices from a track
- device on/off switch
Would be possible to implement these features for the APC mini?
Thanks
Now what about:
- deleting clips
- tap tempo
- select different devices from a track
- device on/off switch
Would be possible to implement these features for the APC mini?
Thanks
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
Currently not possible with the API (I can only send a delete key, which depends on the focus).KTlin wrote: - deleting clips
Any idea where to place them? The controller is already pretty crowded...KTlin wrote: - tap tempo
- select different devices from a track
- device on/off switch
-
- KVRer
- 17 posts since 27 Mar, 2014
I made a script that does:dveble wrote:Nice 1, would those work with apc key 25?
https://github.com/osakared/apc-key-25-bitwig
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
Here's a little update 2.11:
* On the MkII you can now navigate the device layers. Use Shift+Device Left/Right.
* Currently playing measure in Drumsequencer is now drawn in green.
* Bugfix: Two green colors had the same value on the Push.
* On the MkII you can now navigate the device layers. Use Shift+Device Left/Right.
* Currently playing measure in Drumsequencer is now drawn in green.
* Bugfix: Two green colors had the same value on the Push.
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
And also some care for the little one:
* Currently playing measure in Drum- and Notesequencer is now drawn in green. Nonactive measures are now painted orange.
* Bugfix: Clip recording did not start when pad was pressed if Bitwig was not already playing.
* Currently playing measure in Drum- and Notesequencer is now drawn in green. Nonactive measures are now painted orange.
* Bugfix: Clip recording did not start when pad was pressed if Bitwig was not already playing.
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
2.2 for APC40 and APC40mkII is up! Fully compatible now with Bitwig 1.1.6.
Get it from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html
Also see the updated Wiki documentation.
Enjoy!
Changelist:
- Drumpads now use the colors set in the drum machine.
- On track bank change the 1st channel of the bank is selected.
- Removed selection of clip with same index when changing tracks because of some nasty side effects.
Get it from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html
Also see the updated Wiki documentation.
Enjoy!
Changelist:
- Drumpads now use the colors set in the drum machine.
- On track bank change the 1st channel of the bank is selected.
- Removed selection of clip with same index when changing tracks because of some nasty side effects.
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
2.2 for APCmini is also up! Fully compatible now with Bitwig 1.1.6.
Get it from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html
Also see the updated Wiki documentation.
Enjoy!
Changelist:
- Removed selection of clip with same index when changing tracks because of some nasty side effects.
Get it from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html
Also see the updated Wiki documentation.
Enjoy!
Changelist:
- Removed selection of clip with same index when changing tracks because of some nasty side effects.
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
I mixed up a file change of the APC with the Push script. Please redownload for APCmkI and APCmkII.
-
- KVRist
- 37 posts since 3 Dec, 2014
Spent yesterday with the script. Awesome work!
One thing I had in mind - would it be possible to have a reverse possibility in the sequencer, meaning for example, if I press shift+lit step, it would play that step in reverse?
Oh, btw, your site says last update in December, and the version is still 2.11.
One thing I had in mind - would it be possible to have a reverse possibility in the sequencer, meaning for example, if I press shift+lit step, it would play that step in reverse?
Oh, btw, your site says last update in December, and the version is still 2.11.
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
How can you play a step in reverse? I guess you mean to reverse all notes of the pad in the whole clip?twumpy wrote: One thing I had in mind - would it be possible to have a reverse possibility in the sequencer, meaning for example, if I press shift+lit step, it would play that step in reverse?
I guess you need to refresh your browser (Ctrl+F5).twumpy wrote: Oh, btw, your site says last update in December, and the version is still 2.11.
-
- KVRist
- 37 posts since 3 Dec, 2014
Thanks moss, I must have worked pretty late. Sampler doesn't have a reverse function so it wouldn't really work. I was playing around with loops at the time, which you can obviously reverse at onsets. In shot, disregard my last message, aside for applauding your work
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
I did a tutorial video for the APC40 mkI and mkII.
https://www.youtube.com/watch?v=rSNJHAGSeRo
Enjoy!
https://www.youtube.com/watch?v=rSNJHAGSeRo
Enjoy!
- KVRAF
- Topic Starter
- 4141 posts since 13 May, 2004
I updated the APCmini script to 2.3:
- Streamlined and fixed behaviour of cursor buttons with and without Shift pressed (see updated documentation).
- Bugfix: Fixed display of note range in sequencer mode.
- Streamlined and fixed behaviour of cursor buttons with and without Shift pressed (see updated documentation).
- Bugfix: Fixed display of note range in sequencer mode.