One Synth Challenge #88: TAL-NoiseMaker (Mac/PC) (z.prime wins!)
-
- KVRist
- 47 posts since 23 Mar, 2016 from az
-
- KVRer
- 5 posts since 14 Dec, 2014
Hi everyone,
This is my first OSC, I just discovered this challenge a few days ago and thought it sounded fun, so I put together something for it! I usually mostly use hardware, but I've used TAL plugins in the past so it was fun getting to know NoiseMaker further.
https://soundcloud.com/apertome/apertom ... c-geometry
Created/sequenced in Reaper
Additional sequencing by
- Arturia beatstep
- Doepfer Dark Time
- Korg Electribe 2 (sequencing only)
10 instances of TAL NoiseMaker
1 instance TAL Dub III delay
1 instance TAL Reverb II
Built in Reaper effects:
- Master Limiter
- MIDI Transpose
- MIDI Tool v2
- ReaComp
I tried to comply with the many/confusing rules, but let me know if I missed something.
Thanks,
Michael
This is my first OSC, I just discovered this challenge a few days ago and thought it sounded fun, so I put together something for it! I usually mostly use hardware, but I've used TAL plugins in the past so it was fun getting to know NoiseMaker further.
https://soundcloud.com/apertome/apertom ... c-geometry
Created/sequenced in Reaper
Additional sequencing by
- Arturia beatstep
- Doepfer Dark Time
- Korg Electribe 2 (sequencing only)
10 instances of TAL NoiseMaker
1 instance TAL Dub III delay
1 instance TAL Reverb II
Built in Reaper effects:
- Master Limiter
- MIDI Transpose
- MIDI Tool v2
- ReaComp
I tried to comply with the many/confusing rules, but let me know if I missed something.
Thanks,
Michael
- KVRist
- 186 posts since 28 Dec, 2012
My entry this month - Two Times Two Times Two
https://soundcloud.com/jazzaria/two-times-two-times-two
2**3 => 8: the magic number of low resolution yet high sentiment. This mostly 8-bit waltz may not have much entropy, but its signal will surely evoke reminiscences.
Made in Reaper
12 instances of TAL NoiseMaker
FX Plugins: ReaEQ, ReaXcomp, JS Master Limiter
https://soundcloud.com/jazzaria/two-times-two-times-two
2**3 => 8: the magic number of low resolution yet high sentiment. This mostly 8-bit waltz may not have much entropy, but its signal will surely evoke reminiscences.
Made in Reaper
12 instances of TAL NoiseMaker
FX Plugins: ReaEQ, ReaXcomp, JS Master Limiter
- KVRer
- 10 posts since 2 May, 2016
Hey guys,
here is a little work in progress. Tell me what you think. About 20 Tal Noisemakers. Ableton.
https://soundcloud.com/reiswolf/talnoiseprod-wip
here is a little work in progress. Tell me what you think. About 20 Tal Noisemakers. Ableton.
https://soundcloud.com/reiswolf/talnoiseprod-wip
-
- KVRer
- 6 posts since 13 Sep, 2014
https://soundcloud.com/obsoletesun/glas ... lis-osc-88
Made in FL Studio 11
14 x Noisemaker
FX: Fruity Reverb
Mastering: Maximus
Made in FL Studio 11
14 x Noisemaker
FX: Fruity Reverb
Mastering: Maximus
- KVRer
- 29 posts since 1 Apr, 2015
Hi all.
NoiseMaker has always been an interesting synth for me.. This was a nice challenge to get me to explore it a bit further.
Here's my entry:
https://soundcloud.com/subject36/subjec ... ons-moon-1
Made in Logic Pro X.
EDIT!
I updated the mix!! So there is a new link here, as I'm not a Pro member at Soundcloud..
Here are all the plugs:
MIDI:
- BlueARP. (Free 3rd party.)
- Modulator (Internal arpeggiator.)
Stock:
- Channel EQ
- Compressor (on individual tracks and on the master)
- Limiter (on the master)
- Distorsion (very light)
- Tape Delay
- Platinum Reverb
3rd party:
- PTEq-X (used on several tracks)
- Bitter Sweet (some sweetness)
- Protoverb
- TDR VOS Slick EQ
Best of luck to you all!
/S36
NoiseMaker has always been an interesting synth for me.. This was a nice challenge to get me to explore it a bit further.
Here's my entry:
https://soundcloud.com/subject36/subjec ... ons-moon-1
Made in Logic Pro X.
EDIT!
I updated the mix!! So there is a new link here, as I'm not a Pro member at Soundcloud..
Here are all the plugs:
MIDI:
- BlueARP. (Free 3rd party.)
- Modulator (Internal arpeggiator.)
Stock:
- Channel EQ
- Compressor (on individual tracks and on the master)
- Limiter (on the master)
- Distorsion (very light)
- Tape Delay
- Platinum Reverb
3rd party:
- PTEq-X (used on several tracks)
- Bitter Sweet (some sweetness)
- Protoverb
- TDR VOS Slick EQ
Best of luck to you all!
/S36
Last edited by subject36 on Wed Jun 29, 2016 12:58 pm, edited 4 times in total.
Analogue and digital alike - inside and outside the box. All good music is done with passion and love, not religious convictions!
-
- KVRist
- 91 posts since 15 Apr, 2013 from Perth WA
Very nice tuneapertome wrote:Hi everyone,
This is my first OSC, I just discovered this challenge a few days ago and thought it sounded fun, so I put together something for it! I usually mostly use hardware, but I've used TAL plugins in the past so it was fun getting to know NoiseMaker further.
https://soundcloud.com/apertome/apertom ... c-geometry
Created/sequenced in Reaper
Additional sequencing by
- Arturia beatstep
- Doepfer Dark Time
- Korg Electribe 2 (sequencing only)
10 instances of TAL NoiseMaker
1 instance TAL Dub III delay
1 instance TAL Reverb II
Built in Reaper effects:
- Master Limiter
- MIDI Transpose
- MIDI Tool v2
- ReaComp
I tried to comply with the many/confusing rules, but let me know if I missed something.
Thanks,
Michael
Not sure how the use of external sequencing would fit within the rules. Did you record the sequence data into reaper?
- KVRist
- 68 posts since 30 Dec, 2015 from Sydney, Australia
Just uploaded my entry for this month. It is easy to fiddle with your tune and mix forever, which is why I love having a deadline with the OSC! Had a blast using Noisemaker, which is probably my fave free vst synth of all time
My entry details:
DAW: Reaper 4
25 instances of NoiseMaker, including using the native reverb and chorus
Native Reaper FX: ReaEQ, ReaDelay
3rd party FX: Ferric TDS and MJUCjr on the drum buss, and Sanford Reverb as the main reverb
https://soundcloud.com/7angram/7angram-levitate
My entry details:
DAW: Reaper 4
25 instances of NoiseMaker, including using the native reverb and chorus
Native Reaper FX: ReaEQ, ReaDelay
3rd party FX: Ferric TDS and MJUCjr on the drum buss, and Sanford Reverb as the main reverb
https://soundcloud.com/7angram/7angram-levitate
-
- KVRist
- 48 posts since 17 May, 2014
Mechanought wrote:I'm having issues with this synth in Reaper. If I have automation enabled, it causes the whole program to freeze up until I close the FX containing window. I have to tab out of Reaper first in order to get any response though. It's really odd. Not experienced a bug like this in Reaper.
I have the same problem First time for a bug like that also.
-
- KVRian
- 711 posts since 11 Mar, 2014 from Netherlands
wagtunes wrote: The OSC is a luxury that I just can't afford anymore.
It does take (for me anyway) a considerable amount of time.
-
- KVRer
- 5 posts since 14 Dec, 2014
Laxplanet wrote: Very nice tune
Not sure how the use of external sequencing would fit within the rules. Did you record the sequence data into reaper?
Thanks! I don't see any rules about sequencing. I can only assume that MIDI is allowed? What about midi keyboards? I used one of those too, but didn't mention it since I thought it was obvious.
Yes, I recorded the sequences into Reaper -- it's just MIDI.
-
- KVRer
- 5 posts since 14 Dec, 2014
I had the same problem as well. I found a solution, maybe. After I recorded a track (and some automation) it created a Volume envelope but also 2 other envelopes which aren't really labelled. These seem to be related to the display -- expanding/contracting different sections maybe? Anyway I deleted these two mysterious automation tracks and things improved. I still had some problems, but I was mostly able to get around them this way.rootberg wrote:Mechanought wrote:I'm having issues with this synth in Reaper. If I have automation enabled, it causes the whole program to freeze up until I close the FX containing window. I have to tab out of Reaper first in order to get any response though. It's really odd. Not experienced a bug like this in Reaper.
I have the same problem First time for a bug like that also.
-
- KVRAF
- Topic Starter
- 2686 posts since 19 Dec, 2010 from North America
That's fineapertome wrote: Yes, I recorded the sequences into Reaper -- it's just MIDI.
One Synth Challenge: https://sites.google.com/site/kvrosc/about
-
- KVRist
- 47 posts since 25 Apr, 2013
my entry this month:
https://soundcloud.com/harthstein/harth ... -of-merlin
28 instances of TAL Noisemaker
created with Ableton Live 9
Gated Effect created with Preset "PD Bit Orchestra TAL" and Ableton Live Gate
DAW Effects:
26 Equalizer EQ8
21 Compressor
5 Limiter
3 Simple Delay
2 Reverb
Other:
1 EpicVerb
Master Track:
TDR VOS SlickEQ
Ableton Live EQ8
Ableton Live StereoWith
Limiter No 6
DR:7
https://soundcloud.com/harthstein/harth ... -of-merlin
28 instances of TAL Noisemaker
created with Ableton Live 9
Gated Effect created with Preset "PD Bit Orchestra TAL" and Ableton Live Gate
DAW Effects:
26 Equalizer EQ8
21 Compressor
5 Limiter
3 Simple Delay
2 Reverb
Other:
1 EpicVerb
Master Track:
TDR VOS SlickEQ
Ableton Live EQ8
Ableton Live StereoWith
Limiter No 6
DR:7
-
- KVRian
- 800 posts since 20 Oct, 2003 from Seattle
https://soundcloud.com/jasinski/osc-88-noisemaker3-2
50+ instances of Noisemaker
Ableton Live
Reverb, M4L Convolution, EQ8, Saturation, Compressor, Amp (20%mix), Cabinet (15%mix), Multiband Compressor, Limiter
Thirdparty plugs
Luftikus, W1
50+ instances of Noisemaker
Ableton Live
Reverb, M4L Convolution, EQ8, Saturation, Compressor, Amp (20%mix), Cabinet (15%mix), Multiband Compressor, Limiter
Thirdparty plugs
Luftikus, W1