FR: distinguishing EQ graph lines

Official support for: meldaproduction.com
Post Reply New Topic
RELATED
PRODUCTS

Post

OK, here's a quick test - have a look at this and work out which line in the Input level and which is the Output:
Image >>> http://i.imgur.com/XkF4FpX.png

(Before you ask - that's a modified Aluminion style.)

And how about now?
Image >>> http://i.imgur.com/DRuM3th.png

tl:dr: could we have some way of distinguishing between Input and Output or Left and Right levels in the EQ graphs? (This is not urgent but it would be nice to have.)

And, yes, I can listen but I like visual confirmation ;)

---------------------------------
Add-on FRs / Questions
(a) would it be better to have those HP and LP tags at the top of the lines? Avoiding the Sonogram and much less likely to overlay any other info,
(b) when the display is Paused but playback continues, the EQ line (white) continues to move; should it be paused too?
DarkStar, ... Interesting, if true
Inspired by ...

Post

There is something funky going on; look at what I managed to achieve (no idea how and the saved preset does not load with the same behaviour):

Image

The green / white lines are NOT the colour specified in the Settings.
DarkStar, ... Interesting, if true
Inspired by ...

Post

(Not sure I understand your post but)
Seems you have to DISABLE "Color" on Settings>Graphs (on the graph, not the top bar) to see that green/white lines. Otherwise it sets both lines to that color (at least on MEqualizer).

Post

DarkStar wrote:OK, here's a quick test - have a look at this and work out which line in the Input level and which is the Output:
Image >>> http://i.imgur.com/XkF4FpX.png
:?:

The output level is the lower one. Should you try this again after a cup of coffee?

It's always the brighter one in MEqualizer.

Post

DarkStar wrote:OK, here's a quick test - have a look at this and work out which line in the Input level and which is the Output:
Image >>> http://i.imgur.com/XkF4FpX.png

(Before you ask - that's a modified Aluminion style.)
Looks good.

Post

pottering wrote:(Not sure I understand your post but)
Seems you have to DISABLE "Color" on Settings>Graphs (on the graph, not the top bar) to see that green/white lines. Otherwise it sets both lines to that color (at least on MEqualizer).
Yep, that was it - thank you.
DarkStar, ... Interesting, if true
Inspired by ...

Post

.jon wrote:
DarkStar wrote:OK, here's a quick test - have a look at this and work out which line in the Input level and which is the Output:
Image >>> http://i.imgur.com/XkF4FpX.png
:?:

The output level is the lower one. Should you try this again after a cup of coffee?

It's always the brighter one in MEqualizer.
Nope - the two lines cross over - have a close look at the 3 cross-over points.

Also, one is slightly brighter than the other but that is not very noticeable here.
DarkStar, ... Interesting, if true
Inspired by ...

Post

Right, sorry, I see what you mean now. Yes, it's actually impossible to see which one is which, input & output visualisation works only when you either cut or boost, not when doing both.

Post

Well, it's not that simple. It would need another color setting, and well, I'm just not open for that :D.
As for LP/HP tags - good point.
Pause - of course not! You'd loose the visual response. I have quite frankly absolutely no idea why you would want that :D
Vojtech
MeldaProduction MSoundFactory MDrummer MCompleteBundle The best plugins in the world :D

Post

...could it be done with a "fixed" intensity/saturation setting...low for input, high for output?...the display as it is now gives no real sense of which is which...hth../s~
mba m2 15" | 16gig.ram | 1tb ssd | Sonoma 14.2.1 (23C71)
mbp i9 16" | 16gig.ram | 1tb ssd | Sonoma 14.2.1 (23C71)
logic10.8.1  | reaper7.07 | focusrite.2i2

Post

Yeah it's as good as pointless now, I disabled the feature as it was just misleading.

Post

The problem is, there's not a single color operation that would work for all scenarios. Right now, the colors are slightly different - don't remember the code, but one is dark blue and the other is black. But then when the background gets different, the colors need to adjust... complex... I'll try to make them more different, but with some styles they just won't.
Vojtech
MeldaProduction MSoundFactory MDrummer MCompleteBundle The best plugins in the world :D

Post

... looking good in v10.06 (public beta is available). Thank you.
DarkStar, ... Interesting, if true
Inspired by ...

Post

:tu:
Vojtech
MeldaProduction MSoundFactory MDrummer MCompleteBundle The best plugins in the world :D

Post

...I knew you could to it, you sly fox... :lol:...dig in that old code for those little gems! :lol: :lol: :lol: .../s~
mba m2 15" | 16gig.ram | 1tb ssd | Sonoma 14.2.1 (23C71)
mbp i9 16" | 16gig.ram | 1tb ssd | Sonoma 14.2.1 (23C71)
logic10.8.1  | reaper7.07 | focusrite.2i2

Post Reply

Return to “MeldaProduction”