Hyakken is the HY dev !
-
- KVRist
- 323 posts since 21 Dec, 2015 from Japan
I just updated both version of HY-MBMFX for 5th knob of overdrive effect.
And I added test version of reverse delay to full version which will be finished next update.
Thank you,
Tadashi
And I added test version of reverse delay to full version which will be finished next update.
Thank you,
Tadashi
- KVRian
- 1209 posts since 28 Jun, 2005
Version 1.05.1 Workshyakken wrote:I just updated both version of HY-MBMFX for 5th knob of overdrive effect.
And I added test version of reverse delay to full version which will be finished next update.
Thank you,
Tadashi
Thanks
-
- KVRist
- 162 posts since 31 Dec, 2005
Hi there Hyakken.
A while back i did some beta testing for your HY-Delay2, i really liked this vst but the only problem i found which has stopped me from buying it was the issue in PM mode when the FREEZE button is active on a sound, then when you click on the different delay times (2X 4X 8X etc.) there is a slight hesitation before the frozen sound reaches the selected delay time (A slight winding up of speed) In a live mixing situation it sounds odd, please please can you fix this so that the response is fast when selecting different delay times on a frozen sound ?
A while back i did some beta testing for your HY-Delay2, i really liked this vst but the only problem i found which has stopped me from buying it was the issue in PM mode when the FREEZE button is active on a sound, then when you click on the different delay times (2X 4X 8X etc.) there is a slight hesitation before the frozen sound reaches the selected delay time (A slight winding up of speed) In a live mixing situation it sounds odd, please please can you fix this so that the response is fast when selecting different delay times on a frozen sound ?
Strictly drum and bass
-
- KVRist
- 323 posts since 21 Dec, 2015 from Japan
Now I'm working on HY-Delay3 which will be released on August.Megawattt wrote:Hi there Hyakken.
A while back i did some beta testing for your HY-Delay2, i really liked this vst but the only problem i found which has stopped me from buying it was the issue in PM mode when the FREEZE button is active on a sound, then when you click on the different delay times (2X 4X 8X etc.) there is a slight hesitation before the frozen sound reaches the selected delay time (A slight winding up of speed) In a live mixing situation it sounds odd, please please can you fix this so that the response is fast when selecting different delay times on a frozen sound ?
Can you wait for this?
I will remake pm delay mode in HY-Delay3.
-
- KVRist
- 162 posts since 31 Dec, 2005
Hi Hyakken.hyakken wrote:Now I'm working on HY-Delay3 which will be released on August.Megawattt wrote:Hi there Hyakken.
A while back i did some beta testing for your HY-Delay2, i really liked this vst but the only problem i found which has stopped me from buying it was the issue in PM mode when the FREEZE button is active on a sound, then when you click on the different delay times (2X 4X 8X etc.) there is a slight hesitation before the frozen sound reaches the selected delay time (A slight winding up of speed) In a live mixing situation it sounds odd, please please can you fix this so that the response is fast when selecting different delay times on a frozen sound ?
Can you wait for this?
I will remake pm delay mode in HY-Delay3.
This is great news and many thanks, i have money waiting for this
Strictly drum and bass
- Banned
- 155 posts since 27 Mar, 2008 from California
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Any new synths in the making Hyakken ?
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRist
- 323 posts since 21 Dec, 2015 from Japan
What does "Sally Hyak" means?Synapse2k wrote:Sally Hyak.
Unfortunately I have no news about synth stuff.Halonmusic wrote:Any new synths in the making Hyakken ?
I'm fixing some bugs of HY-Mono now, but no new stuff.
I would like to make drum synth like Korg ER-1 which is one of my favorite drum synth.
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Oh a Korg ER-1 would be awesome.hyakken wrote:What does "Sally Hyak" means?Synapse2k wrote:Sally Hyak.
Unfortunately I have no news about synth stuff.Halonmusic wrote:Any new synths in the making Hyakken ?
I'm fixing some bugs of HY-Mono now, but no new stuff.
I would like to make drum synth like Korg ER-1 which is one of my favorite drum synth.
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
pipelineaudio2 pipelineaudio2 https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=386715
- KVRer
- 2 posts since 10 Oct, 2016
Loving the chorus!!!! Would love to see an indicator of what note divisions the rate knob is doing when in Sync mode, and is it sync when its black or colored?
-
- KVRian
- 1227 posts since 13 May, 2015
Re-posting here -
I am really enjoying the free SEQ 16x3 sequencer, especially it's randomisation options. I would happily pay the low asking price for the full version but I am struggling to make creative use of the second and third sequencers which enable control of the velocity, gate and probability of the first sequencer. These parameters are already controllable and randomisable in the first sequencer so I have so far failed to do anything interesting with the additional sequencers.
Has anyone made good use of them and have some tips or suggestions?
I am really enjoying the free SEQ 16x3 sequencer, especially it's randomisation options. I would happily pay the low asking price for the full version but I am struggling to make creative use of the second and third sequencers which enable control of the velocity, gate and probability of the first sequencer. These parameters are already controllable and randomisable in the first sequencer so I have so far failed to do anything interesting with the additional sequencers.
Has anyone made good use of them and have some tips or suggestions?
-
- KVRian
- 881 posts since 28 Sep, 2012 from Norway
Isn't it possible to set different midi channel per seq line? I'm going to try it with external gearSHall1000 wrote:Re-posting here -
I am really enjoying the free SEQ 16x3 sequencer, especially it's randomisation options. I would happily pay the low asking price for the full version but I am struggling to make creative use of the second and third sequencers which enable control of the velocity, gate and probability of the first sequencer. These parameters are already controllable and randomisable in the first sequencer so I have so far failed to do anything interesting with the additional sequencers.
Has anyone made good use of them and have some tips or suggestions?
- KVRAF
- 9576 posts since 16 Dec, 2002
Again I beg, please release the M581 as a VST, or better still your entire SeqCollection
Amazon: why not use an alternative
-
- KVRian
- 1227 posts since 13 May, 2015
Doesn't look like it, There is only one midi channel selector in the midi settings tab that I can see.gaf_thit wrote:
Isn't it possible to set different midi channel per seq line? I'm going to try it with external gear
My original question was how to use the sequencers 2 and 3 to modulate Sequencer 1 in interesting ways and how exactly they interact - for example if they have different sequencer lengths.
-
- KVRist
- 323 posts since 21 Dec, 2015 from Japan
Sorry for late replies.
I have been finishing HY-Delay3.
And I almost finished it.
Actually I don't remember detail of that plugin.
I will check my code.
This one will contain 5 different sequencer.
So you can wait this one.
Current version no.
I will make version 2 of this next year.
Until that I will find out multiout thing.
So if you set those things differently, you can get random result.
//===========================================================
Example(seq2 controls velocity, seq3 controls gate time) :
When all those 3 sequencer lines have same setting.
Combination of each step will always be same.
Like this.
step numb 1 2 3 4
seq1(pitch) 36 12 25 68
seq2(velo) 98 50 12 79
seq3(gate) 50 90 10 36
But if you set sequencer settings of each seq line differently.
Result can be different each time.
Because running speed or direction or step size is different.
I think this is the core idea of doepfer MAQ16/3.
//==================================================================
Tadashi
I have been finishing HY-Delay3.
And I almost finished it.
Chorus means Chorus/Flanger plugin?pipelineaudio2 wrote:Loving the chorus!!!! Would love to see an indicator of what note divisions the rate knob is doing when in Sync mode, and is it sync when its black or colored?
Actually I don't remember detail of that plugin.
I will check my code.
I just started VST version SeqCollection.SHall1000 wrote:Re-posting here -
I am really enjoying the free SEQ 16x3 sequencer, especially it's randomisation options. I would happily pay the low asking price for the full version but I am struggling to make creative use of the second and third sequencers which enable control of the velocity, gate and probability of the first sequencer. These parameters are already controllable and randomisable in the first sequencer so I have so far failed to do anything interesting with the additional sequencers.
Has anyone made good use of them and have some tips or suggestions?
This one will contain 5 different sequencer.
So you can wait this one.
gaf_thit wrote:Isn't it possible to set different midi channel per seq line? I'm going to try it with external gearSHall1000 wrote:Re-posting here -
I am really enjoying the free SEQ 16x3 sequencer, especially it's randomisation options. I would happily pay the low asking price for the full version but I am struggling to make creative use of the second and third sequencers which enable control of the velocity, gate and probability of the first sequencer. These parameters are already controllable and randomisable in the first sequencer so I have so far failed to do anything interesting with the additional sequencers.
Has anyone made good use of them and have some tips or suggestions?
Current version no.
I will make version 2 of this next year.
Until that I will find out multiout thing.
Each sequencer line can be controlled it's running direction, speed, step size.SHall1000 wrote:Doesn't look like it, There is only one midi channel selector in the midi settings tab that I can see.gaf_thit wrote:
Isn't it possible to set different midi channel per seq line? I'm going to try it with external gear
My original question was how to use the sequencers 2 and 3 to modulate Sequencer 1 in interesting ways and how exactly they interact - for example if they have different sequencer lengths.
So if you set those things differently, you can get random result.
//===========================================================
Example(seq2 controls velocity, seq3 controls gate time) :
When all those 3 sequencer lines have same setting.
Combination of each step will always be same.
Like this.
step numb 1 2 3 4
seq1(pitch) 36 12 25 68
seq2(velo) 98 50 12 79
seq3(gate) 50 90 10 36
But if you set sequencer settings of each seq line differently.
Result can be different each time.
Because running speed or direction or step size is different.
I think this is the core idea of doepfer MAQ16/3.
//==================================================================
Tadashi
Last edited by hyakken on Fri Jul 28, 2017 9:17 am, edited 6 times in total.