Multi Filter is a "warm and clean sounding" resonant filter. Features: 24 dB lowpass filter. 12 dB bandpass/highpass filter. MIDI learn (resonance, cutoff). Parameter smoothing. ... [more]

Real Synth / Kunz & Knobel is a virtual analog mono synth. Features: Low CPU usage. 2 band-limited oscillators (sinus, triangle, saw, square) and noise. FM, X-Mod, PW. 2 LFOs (sinus, triangle, saw, square), env mode. Mod AD envelope (OSC, FM, PW). Filter ADSR envelope. Amplitude ADSR envelope. Portamento. 24 dB resonance filter (lowpass, bandpass, highpass). 6 dB highpass filter. MIDI learn (all parameters). ... [more]

TAL-BassLine is a virtual analog bass synthesizer especially made for bass, acid sounds and effects. It's based on a robust core and has the usual controls of analogue hardware synthesizers. A unique -18dB low pass filter with a lot of asymmetric and random components introduce a warm and analogue sound. Very fast, non linear envelopes are also a part of this synth. Features: Band-limited oscillators (saw, pulse). Sub-oscillator: square -1 oct., square -2 oct., pulse -1 oct, pulse -2 oct. -18 dB/octave low-pass filter (resonant/self-oscillating). LFO (frequency: 0,1 .. 30 Hz, waveforms: si... [more]

TAL-Bitcrusher is a simple bitcrusher with low- and high-shelf EQ and a noise cross modulator included. Features: Adjustable bit-depth (0-32 bit). Adjustable sample rate divisor (up to / 512). Noise cross modulator. 24 dB low- and high-shelf filter. 10 presets for bass, leads and drums. Low CPU usage. ... [more]

Chorus-60 is a VST effect version of the chorus implemented in U-NO-60. Features: 2 modes. Dry/wet adjustable. Volume knob. Low CPU. ... [more]

TAL-Dub is a vintage delay effect. It can be used for a wide range of effects from clean to extreme distorted, resonating, never ending, delays. Features: 12dB resonance filter. Low cut filter. Limiter/Distortion for high feedbacks. Delay time and feedback for each channel with link. Input signal swap. Filter feedback and filter fx mode. Filter mode for input (can also be used as filter module). Easy to use MIDI learn. 20 presets. ... [more]

TAL-DUB-II is an extended version of TAL-Dub with a completely new sound engine. A 4x over-sampled distortion stage allows you to add vintage distortion to the delayed signal (it is also possible to make clean delays). A sinus LFO has the possibility to modulate delay time and low pass filter cutoff. Adjustable LFO stereo width is also included. An analog sounding 6dB low pass filter with resonance and a 3dB high cut filter are also parts of TAL-DUB-II. Different routing options open a wide range of possibilities. Features: Synced delay times (1/16, 1/8, 1/4, 1/2, 1/1, 2/1 and tripled and do... [more]

TAL-Elek7ro is a virtual analog synth with some special features like oscillator hard-sync and frequency modulation. It features alias-free oscillators, newly developed fast envelopes and LFOs with a wide range from 0.1Hz up to 400 Hz. A free routable envelope with attack and decay is available too. This synth is useful for a wide range of sounds from percussion to deep bass sounds. Features: 2 oscillators with hard-sync, PW and FM (saw, pulse, triangle, sine). 1 sub oscillator (saw, rectangle). 1 noise oscillator. 18dB or 12dB non linear analog modelled low pass resonance filter. Mono mode,... [more]

TAL-Filter is a multi-mode filter device, including a High Pass, Band Pass and Low Pass filter. High Pass, Band Pass, Low Pass filter modes. 4 Pole, 2 x oversampled non linear filter. LFO sync mode (full sync to host). LFO waveforms: Sinus, Triangle, Saw, Square, S&H, Noise. Envelope follower. Input drive. ... [more]

TAL-Flanger is a easy to tweak stereo flanger effect with its own special sound and some asymmetric analog like components in the feedback corner. Useful for a wide range of flanger effects from subtle to extreme.Features: Syncable LFO speed. Delay knob for static chorus depth adjustment or manual control without the LFO. Depth, delay and width parameter smoothing. Asymmetric modeled components in the feedback path. Supports all sample rates. Default presets. ... [more]

TAL-Phaser is a carefully modelled stereo phaser effect. The user can choose between two, four and six stages and it is possible to adjust the lowest and highest frequency of the filter. TAL-Phaser is usable for a wide range of phasing effects from gentle to extreme with a lot of feedback. Features: Two, four and six stage mode. Lowest- and highest-frequency adjustable. Stereo phase offset from 0 to 180 degree. Feedback (a very small amount of second order distortion in the feedback path). Syncable LFO. Adjustable Dry/Wet. Some default presets. ... [more]

TAL-Reverb is a free Open Source stereo plate reverb based on JUCE. It has its own sound because of its special signal routing. Slightly modulated delay times avoid artifacts in the reverb tail and give this reverb a smooth sound. Features: Easy to use. 12 dB High- and Low-Pass filter. Pre delay, up to one second. Usable for a wide range of sounds. MIDI Learn (VST only). 10 presets. Open Source (GPL). ... [more]

TAL-Tube is a saturation plugin with the characteristics of tubes. It's suitable for adding higher harmonics to instruments or drums and adding more excitement and analog character to digital sounds. At extreme values it can also be used as a grungy distortion effect. Features: Amplifier mode. Soft and hard mode. Dry/Wet knob for creative people. Gain reduction display. 4x oversampled processing. Low CPU. ... [more]

TAL-U-No-62 is a polyphonic virtual analogue synthesizer with a "unique" filter sound. An original Roland Juno-60 was used as reference for the oscillators, filters and controls. Features: Polyphonic (6 voices). Band-limited oscillators. One syncable LFO with five different waveforms. 24 dB lowpass filter with self oscillation, non-resonant high-pass filter. Fast ADSR envelope. Smooth cutoff changes (also with MIDI controllers). Velocity sensitive filter envelope. MIDI learn for all pots. Supports all sample rates. 20 presets. ... [more]

TAL-USEq is especially designed after some tilt EQs from the 1970s. This type of EQ allows you to adjust the audio material without changing the character of a sound to much. It's an easy way to make an audio signal sound darker or brighter with only one knob. The bass lift knob is a special addition that boosts or attenuates bass frequencies below 300Hz. Features: 8 dB low / high shelf filter. 12 dB bass lift filter at 300 Hz. Variable center frequency (100 - 10,000Hz). Adjustable bandwidth (q: 0.1 to 2.0). Volume knob. On/Off switch. Very easy to use. Low CPU. ... [more]

TAL-Vocoder is a vintage vocoder emulation with 11 bands that emulates the sound of vocoders from the early 80s. It includes analog-modeled components in combination with digital algorithms such as the SFFT (Short-Time Fast Fourier Transform). It includes an envelope follower for each of the eleven bands. This vocoder is optimized for voice processing and includes some algorithms for consonants to make the voice more intelligible. The carrier signal is a VCO (Voltage Controlled Oscillator) with a Pulse, Saw, Noise and Sub Osc. But it's also possible to use the left stereo input as carrier, th... [more]

Vintager is a simple to use monophonic VST instrument with the functional range and sound of classic analog synths. A good sounding lowpass filter, three band-limited oscillators and accurate envelopes are the heart of this synth. Features: Two oscillators with FM and PW (saw, pulse, triangle, sine, noise). One sub oscillator (rectangle, two octaves deeper). Low pass filter with self oscillation. Two precise non linear envelopes (filter, amplitude). Two LFOs with five different waveforms to modulate filter, pitch, FM and PW. Portamento (three different modes). MIDI learn for all pots. ... [more]