Yamaha has announced the release of M7CL StageMix, a new free App for the iPad that provides remote control of Yamaha's M7CL digital mixing console functions.
StageMix provides remote control of M7CL functions via a simple, intuitive graphical interface from anywhere within wireless range. The software has been specifically designed to allow engineers to adjust monitor mixes from the performers' positions on stage, directly controlling mix parameters via the iPad rather than having to rely on verbal directions to a second engineer. The result is better mixes in less time: a huge advantage during high-pressure pre-show setup. StageMix does not provide remote control of all M7CL parameters, but is focused on the requirements for adjusting monitor mixes on stage.
Mixer Window
The main page of the StageMix is called the "Mixer" window. It shows the EQ curve, CUE and ON buttons, fader and level meters, and channel names for eight adjacent channels. Across the top of the screen, all Input, Mix and Matrix level meters and faders are displayed in blocks of eight. This is the "Navigation/Meter Bridge". Press any of these blocks to select which channels are viewed in the fader strips below.
Sends On Faders
The colour of this button matches those used on the M7CL console. [CUE] and [ON] buttons appear below, allowing the currently active Mix or Matrix bus to be Cued and turned On/Off.
EQ Editing
One band of EQ can be adjusted at a time. Press one of the green circles to select the band, and it will be highlighted yellow. EQ bands in StageMix are labelled as follows:
- HP = HPF (input channels only).
- 1 = Low Band.
- 2 = Low-Mid Band.
- 3 = High-Mid Band.
- 4 = High Band.
Functions:
- Controllable Parameters.
- Sends on Faders.
- Input Channel Faders.
- Input Channel On/Off.
- Input Channel Parametric EQs.
- Input Channel Cue.
- Mix Master Faders.
- Mix Bus On/Off.
- Mix Bus Parametric EQs.
- Mix Bus Cue.
- Last Cue/Mix Cue Mode.
- Clear All Cues.
- Graphic EQs (Please note that this parameter may not be available in the initial release)..
Display Only Parameters:
- Input Channel Names.
- Input Channel Meters.
- Mix/Matrix Bus Names.
- Mix Bus Meters.
- EQ Input Meter.
- EQ Output Meter.
Other Related News
