Both feature:

• Sampling Rate: 44.1k, 48k, 88.2k, 96k support.
• 32bit float internal precision.
• Threshold (-60dB to 0dB): Set the threshold level of the gate.
• Attack (0.05ms to 100ms): Set the attack time of the gate.
• Hold (0ms to 1000ms): Set the hold time of the gate.
• Release (ShortRel to 2000ms): Set the release time of the gate.
• Expand Ratio (1:1 to 30:1): Set the ratio of the expander. If you want to use this as only gate effect, set "1:1".
• Range (-oodB to 0dB): Set the minimum level when the gate closes.
• KeyListen (ON or OFF): Output the trigger signals.
• LPF Cutoff Freq (20Hz to off): Set the cutoff frequency of a low pass filter for the trigger signals.
• HPF Cutoff Freq (off to 20000Hz): Set the cutoff frequency of a high pass filter for the trigger signals.

Side Chain Gate/Expander additional features:

• Input channels assigned:
  
  for stereo:
  input ch1: signal input L
  input ch2: signal input R
  input ch3: key input L (for SideChain)
  input ch4: key input R (for SideChain)
  
  for mono:
  input ch1: signal input
  input ch2: key input (for SideChain)