Moog Multimode Filter / Moog Multimode Filter SE

The Moog Multimode Filter delivers an analog-sounding VCF (voltage controlled filter) emulation made for mixing, performing, creating, or destroying. The Moog Multimode Filter is a 'digital-only' tabletop filter set that combines the best of Bob Moog's classic designs with select features from his final Voyager instrument.

The UAD Moog Multimode Filter incorporates features such as a 0 / +20dB gain switch giving an option for the extreme distortion capabilities found at the Minimoog's external input. There is also an Envelope control with both positive and negative values, plus a simple Smooth/Fast switch to change Envelope response time. Next, the Voyager's Spacing control is included that detunes two separate hard-panned filters. A tempo-syncable LFO section incorporates six wave selections and an LFO phase Offset control (-180º to 180º). Mix blends wet and dry signal, while Output controls the final volume of the instrument. In addition, a Mono/Stereo switch enables the mono summing of any stereo effect, plus Effect/Bypass turns off all effects but leaves the Drive and Output controls enabled. Finally, Step/Track disables/enables filter smoothing, in cases where extreme DAW automation may be required.

Features:

• Accurate recreation of the historical Moog Four-Pole filter sound.
• Sophisticated Lowpass, Highpass and Bandpass filtering with self oscillation, saturation and zero artifacts.
• Several classic and modern Moog instrument features combined into one simple control set.
• Six wave shapes, and tempo synchronization for LFOs.
• Mono and Stereo processing, with special features like Spacing and Offset for stereo effects.
• Includes low DSP "SE" version of Moog Multimode Filter.