Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

VST, AU, AAX, etc. plug-in Virtual Instruments discussion
mitchiemasha
KVRist
202 posts since 15 Aug, 2011 from teesside

Post Tue May 14, 2019 3:39 pm

Issue: PHASE LOCK under RATE
The black dot doesn't grey when selected as it does in NOISE. Not sure if this is intended or what is happening here.

Feature request: Cut of Filters in FX (Delay, Reverb)
The ability to move both filters at the same time by clicking and dragging the middle, with automation link and mouse wheel control. Not major but nice!
MSI z390, i7 9700k, Noctua NH-U9S, NVME 970 Pro, 16GB 3000C15, BeQuiet S11, W10, Cubase 10.
Virus TI (INTERGRATED), Yamaha CS2x (Custom Mapped), JV1080 (Dance Card), Nord 2, Novation KS & Stations.

User avatar
msvs
KVRian
1392 posts since 18 Apr, 2011

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Tue May 14, 2019 10:19 pm

edit: you are right with the phaselock, graphics dont update. Easy fix

regarding cutoff in reverb: you can do this already by assigning both LP/HP to a macro button

Hanz Meyzer
KVRian
1091 posts since 20 Oct, 2014

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Wed May 15, 2019 9:10 am

Hi,

found Avenger 1.4.10 in account. What's new?

User avatar
Julien Unison
KVRist
403 posts since 9 Oct, 2006

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Wed May 15, 2019 9:29 am

NEW FILTER ???!!! :hyper:
U N I S O N : shoegaze / electronic / black metal wall of sound with heavenly voice
https://soundcloud.com/weareunison / https://www.facebook.com/unison666 / https://weareunison.com/

Hanz Meyzer
KVRian
1091 posts since 20 Oct, 2014

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Wed May 15, 2019 9:37 am

I think the filter was announced for 1.5?

User avatar
msvs
KVRian
1392 posts since 18 Apr, 2011

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Wed May 15, 2019 11:27 am

just released. v1.4.10 - the last update before 1.5.0
fixing some of issues...

1.4.10 changelog
- fixed hang during loading in ProTools DAW
- fixed issue with wrong routing of FX busses after loading a preset in specific circumstances
- fixed issue with granular envelope global first trigger
- fixed issue with retriggering ARP notes when legato is being used and the chorder voices are being turned on and off
- fixed mouse wheel 12 steps for OSC transpose dial
- fixed issue with hanging ARP when sustain pedal is used
- fixed issue with playing ARP notes that were too long / too short after changing the ARP speed

User avatar
phreaque
KVRian
820 posts since 17 Jul, 2007 from Baghdad-Iq

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Wed May 15, 2019 11:39 am

Perfect and fine update, thanks for the great efforts meister Manuel
Phreaque Modi

mitchiemasha
KVRist
202 posts since 15 Aug, 2011 from teesside

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Wed May 15, 2019 1:44 pm

Can't wait for 5.0...
MSI z390, i7 9700k, Noctua NH-U9S, NVME 970 Pro, 16GB 3000C15, BeQuiet S11, W10, Cubase 10.
Virus TI (INTERGRATED), Yamaha CS2x (Custom Mapped), JV1080 (Dance Card), Nord 2, Novation KS & Stations.

kenny saunders
KVRer
4 posts since 16 May, 2019

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Thu May 16, 2019 3:11 am

sircuit wrote:
Fri May 10, 2019 5:38 am
@msvs: seriously, how do you use Avenger with no HiDPI Support?

I mean if you use the 4K monitor and don’t scale windows, the daw is really really small, Explorer is small only Avenger can zoom in properly. (But is hard for the eyes to work like that)



Just installed Cubase (they have a 50% off offer ongoing btw) and without HDPI enabled it looks terribly small on high resolutions (and my screen is just 1440p). With HIDPI active, it looks great and the only modern plugin that does not support the mode is Avenger (Falcon, Rapid, Serum, u-he all look gorgeous). Meanwhile, Avenger is unusable because Cubase shows a quarter of it’s window.

Rapid woks fine you just have to select sofware rendering as opposed to gpu rendering within the plugin itself.

Also I have the truncated avenger window problem when using hidpi, the workaround is to use 100% or no scaling in windows. bu I emailed Rene from the support section of the website and he sent me a file which apparently (havent tried it yet) sets avenger to 50% and then you manually set it.

sircuit
KVRian
641 posts since 15 Jul, 2016

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Thu May 16, 2019 6:29 am

kenny saunders wrote:
Thu May 16, 2019 3:11 am
sircuit wrote:
Fri May 10, 2019 5:38 am
@msvs: seriously, how do you use Avenger with no HiDPI Support?

I mean if you use the 4K monitor and don’t scale windows, the daw is really really small, Explorer is small only Avenger can zoom in properly. (But is hard for the eyes to work like that)



Just installed Cubase (they have a 50% off offer ongoing btw) and without HDPI enabled it looks terribly small on high resolutions (and my screen is just 1440p). With HIDPI active, it looks great and the only modern plugin that does not support the mode is Avenger (Falcon, Rapid, Serum, u-he all look gorgeous). Meanwhile, Avenger is unusable because Cubase shows a quarter of it’s window.

Rapid woks fine you just have to select sofware rendering as opposed to gpu rendering within the plugin itself.

Also I have the truncated avenger window problem when using hidpi, the workaround is to use 100% or no scaling in windows. bu I emailed Rene from the support section of the website and he sent me a file which apparently (havent tried it yet) sets avenger to 50% and then you manually set it.
(not at the computer now) how about manually setting Avenger to 50% in another host or in Cubase in 100% windows scaling mode, then reopening Cubase in HiDPI mode and then re-setting the scaling to something bigger?

kenny saunders
KVRer
4 posts since 16 May, 2019

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Thu May 16, 2019 1:00 pm

sircuit wrote:
Thu May 16, 2019 6:29 am
kenny saunders wrote:
Thu May 16, 2019 3:11 am
sircuit wrote:
Fri May 10, 2019 5:38 am
@msvs: seriously, how do you use Avenger with no HiDPI Support?

I mean if you use the 4K monitor and don’t scale windows, the daw is really really small, Explorer is small only Avenger can zoom in properly. (But is hard for the eyes to work like that)



Just installed Cubase (they have a 50% off offer ongoing btw) and without HDPI enabled it looks terribly small on high resolutions (and my screen is just 1440p). With HIDPI active, it looks great and the only modern plugin that does not support the mode is Avenger (Falcon, Rapid, Serum, u-he all look gorgeous). Meanwhile, Avenger is unusable because Cubase shows a quarter of it’s window.

Rapid woks fine you just have to select sofware rendering as opposed to gpu rendering within the plugin itself.

Also I have the truncated avenger window problem when using hidpi, the workaround is to use 100% or no scaling in windows. bu I emailed Rene from the support section of the website and he sent me a file which apparently (havent tried it yet) sets avenger to 50% and then you manually set it.
(not at the computer now) how about manually setting Avenger to 50% in another host or in Cubase in 100% windows scaling mode, then reopening Cubase in HiDPI mode and then re-setting the scaling to something bigger?
Actually I realised the problem is very minor indeed: when you initially load the plugin and you get the truncated graphic problem, literally all you have to do is resize the window by dragging (even though the square do thingy might no show) and it just corrects itself. So you can use any scaling.

My problem now seems to be that when I change the skin it resets to default skin whenever I reload cubase.

sircuit
KVRian
641 posts since 15 Jul, 2016

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Thu May 16, 2019 4:04 pm

kenny saunders wrote:
Thu May 16, 2019 1:00 pm
Actually I realised the problem is very minor indeed: when you initially load the plugin and you get the truncated graphic problem, literally all you have to do is resize the window by dragging (even though the square do thingy might no show) and it just corrects itself. So you can use any scaling.

My problem now seems to be that when I change the skin it resets to default skin whenever I reload cubase.
Confirmed, cheers!. A drag to the absolute minimum size, then back to larger seems to redraw the GUI. For the skin, dunno - I use the default, still the most readable among all.

100tifiko
KVRist
223 posts since 28 Jun, 2017

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Fri May 17, 2019 5:40 am

Does the drumseq have a attack and sustain

User avatar
MasterTuner
KVRist
98 posts since 30 May, 2018

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Fri May 17, 2019 8:14 am

100tifiko wrote:
Fri May 17, 2019 5:40 am
Does the drumseq have a attack and sustain
I don't think overtly, but you can get creative and experiment with the MasterFX.
e.g. in terms of attack, if you don't want the sound to come in abruptly, try adding a subtle Mini-Chain to the mfx and playing with the settings there.

100tifiko
KVRist
223 posts since 28 Jun, 2017

Re: Vengeance Producer Suite - AVENGER - free 1.4.9 update with new features

Post Fri May 17, 2019 12:23 pm

MasterTuner wrote:
Fri May 17, 2019 8:14 am
100tifiko wrote:
Fri May 17, 2019 5:40 am
Does the drumseq have a attack and sustain
I don't think overtly, but you can get creative and experiment with the MasterFX.
e.g. in terms of attack, if you don't want the sound to come in abruptly, try adding a subtle Mini-Chain to the mfx and playing with the settings there.
Thanks i found the way I watched the video on youtube and it help me looking what I wanted to do

Return to “Instruments”