Cherry Audio Voltage modular

VST, AU, AAX, etc. plug-in Virtual Instruments discussion
User avatar
tonedef71
KVRian
948 posts since 21 Sep, 2007 from USA

Post Sat Feb 02, 2019 9:53 am

Koshdukai wrote:
Sat Feb 02, 2019 5:57 am
so... yet another Feature Suggestion here: Collapsible Cabinets, that would work like a "Reason Combinator", to make the rack more compact, once some of these cabinets were self-contained in a design-and-forget spirit.
+1
[Intel Core i7 8700 | 32GB DDR4 | Studio One 4 Pro; FL Studio 20; Waveform 9; RapidComposer; Sundog Song Studio; Orb Composer; Pizzicato; Odesi | FL Studio ASIO (WASAPI) | Win10 x64]

kingtubby
KVRian
913 posts since 1 Mar, 2003 from Duston, NN5

Re: Cherry Audio Voltage modular

Post Sat Feb 02, 2019 10:00 am

tonedef71 wrote:
Sat Feb 02, 2019 9:53 am
Koshdukai wrote:
Sat Feb 02, 2019 5:57 am
so... yet another Feature Suggestion here: Collapsible Cabinets, that would work like a "Reason Combinator", to make the rack more compact, once some of these cabinets were self-contained in a design-and-forget spirit.
+1
Agreed. I made the same suggestion on the CA forum a while back. There could be a little arrow head on the upper left corner of each cabinet to open/close.
γνῶθι σαὐτόν

Nleif
KVRist
44 posts since 5 May, 2017

Re: Cherry Audio Voltage modular

Post Sat Feb 02, 2019 8:05 pm

Just a quick question, is there a key reset option in the menu or is there a dedicated module or something for it? I want to reset the osc phase to the same point everytime it is triggered. Don't believe i've seen the option on the OSC modules.

kingtubby
KVRian
913 posts since 1 Mar, 2003 from Duston, NN5

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 3:06 am

Nleif wrote:
Sat Feb 02, 2019 8:05 pm
Just a quick question, is there a key reset option in the menu or is there a dedicated module or something for it? I want to reset the osc phase to the same point everytime it is triggered. Don't believe i've seen the option on the OSC modules.
There is the hard sync input available on all the oscs for that purpose.
γνῶθι σαὐτόν

User avatar
wagtunes
KVRAF
14893 posts since 8 Oct, 2014

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 3:40 am

Well, this is really frustrating. I'm trying to use the Super OSC in poly mode. I've tried every conversion module and setup that I can think of. Logically, it should work but it doesn't. Is what I'm trying to do basically impossible? Can somebody from Cherry Audio let me know so I can stop wasting my time trying to fit a square peg into a round hole?

Oh, and can somebody please make a super OSC for polyphonic use? Thanks.

kingtubby
KVRian
913 posts since 1 Mar, 2003 from Duston, NN5

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 3:50 am

wagtunes wrote:
Sun Feb 03, 2019 3:40 am
Oh, and can somebody please make a super OSC for polyphonic use? Thanks.
I think you'll have to wait for a poly version of the super-osc. Looking at the speed of development I don't see why CA wouldn't produce one fairly soon, but we'll have to wait and see.
γνῶθι σαὐτόν

User avatar
Koshdukai
KVRist
300 posts since 11 Mar, 2007 from Portugal

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 4:14 am

wagtunes wrote:
Sun Feb 03, 2019 3:40 am
Well, this is really frustrating. I'm trying to use the Super OSC in poly mode. I've tried every conversion module and setup that I can think of. Logically, it should work but it doesn't. Is what I'm trying to do basically impossible? Can somebody from Cherry Audio let me know so I can stop wasting my time trying to fit a square peg into a round hole?

Oh, and can somebody please make a super OSC for polyphonic use? Thanks.
Not sure why you can't. You just have to do it "the hard way" (in the OSC section), that's all.
If everything else in your patch is poly except the SuperOSC(s) then, for them, you need to use a "POLY CV CONVERTER" to get multiple Pitch+Gate pairs out of MIDI (because we're missing a "POLY CV TO MONO CV" module, btw), chain as many as needed through MIDI's "OVERFLOW" out to get more voices.

So, these will provide as many Pitch CV outs as you need for the multiple SuperOSCs (as many as voices you need)

Then convert all those SuperOSC audio outs into a single Poly cable using the "MONO CV TO POLY" and continue the Poly audio path from there on.

You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc. or simply ignore those individual gates and use the Poly CV Out's Poly Gate directly.

I haven't tested if there's any difference between the 2 methods above regarding Gate, but I'm sure you'll figure it out quickly :)

User avatar
wagtunes
KVRAF
14893 posts since 8 Oct, 2014

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 4:25 am

Koshdukai wrote:
Sun Feb 03, 2019 4:14 am
wagtunes wrote:
Sun Feb 03, 2019 3:40 am
Well, this is really frustrating. I'm trying to use the Super OSC in poly mode. I've tried every conversion module and setup that I can think of. Logically, it should work but it doesn't. Is what I'm trying to do basically impossible? Can somebody from Cherry Audio let me know so I can stop wasting my time trying to fit a square peg into a round hole?

Oh, and can somebody please make a super OSC for polyphonic use? Thanks.
Not sure why you can't. You just have to do it "the hard way" (in the OSC section), that's all.
If everything else in your patch is poly except the SuperOSC(s) then, for them, you need to use a "POLY CV CONVERTER" to get multiple Pitch+Gate pairs out of MIDI (because we're missing a "POLY CV TO MONO CV" module, btw), chain as many as needed through MIDI's "OVERFLOW" out to get more voices.

So, these will provide as many Pitch CV outs as you need for the multiple SuperOSCs (as many as voices you need)

Then convert all those SuperOSC audio outs into a single Poly cable using the "MONO CV TO POLY" and continue the Poly audio path from there on.

You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc. or simply ignore those individual gates and use the Poly CV Out's Poly Gate directly.

I haven't tested if there's any difference between the 2 methods above regarding Gate, but I'm sure you'll figure it out quickly :)
Did it. Doesn't work.

User avatar
pekbro
KVRAF
2417 posts since 29 Sep, 2010 from Maui

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 4:27 am

If anyone is interested, its quite easy to use artwonk as a generative sequencer for voltage modular in standalone mode.
In case anyone wanted to test their patches with say, fractals or maybe some cellular automata or the life algorithm.

Anyway, its pretty cool and since artwonk is quite old, it uses virtually no resources. :tu:
Although, it is fairly complicated to use beyond the available demos.

Also B-STEP sequencer standalone can be used to great effect with VM (just another sequencer I forgot
I had, maybe some of you do as well).

User avatar
Koshdukai
KVRist
300 posts since 11 Mar, 2007 from Portugal

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 4:29 am

wagtunes wrote:
Sun Feb 03, 2019 4:25 am
Koshdukai wrote:
Sun Feb 03, 2019 4:14 am
You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc.
Did it. Doesn't work.
I just tried it with the "MONO CV TO POLY" for gate and it's working ;)

Quick dirty 4-voice test patch:
https://www.youtube.com/watch?v=Lw-hCLhYEA4

User avatar
wagtunes
KVRAF
14893 posts since 8 Oct, 2014

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 4:40 am

Koshdukai wrote:
Sun Feb 03, 2019 4:29 am
wagtunes wrote:
Sun Feb 03, 2019 4:25 am
Koshdukai wrote:
Sun Feb 03, 2019 4:14 am
You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc.
Did it. Doesn't work.
I just tried it with the "MONO CV TO POLY" for gate and it's working ;)

Quick dirty 4-voice test patch:
https://www.youtube.com/watch?v=Lw-hCLhYEA4
That's nice but I can't make heads or tails of that video because the screen print is too small.

User avatar
Koshdukai
KVRist
300 posts since 11 Mar, 2007 from Portugal

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 4:42 am

wagtunes wrote:
Sun Feb 03, 2019 4:40 am
Koshdukai wrote:
Sun Feb 03, 2019 4:29 am
wagtunes wrote:
Sun Feb 03, 2019 4:25 am
Koshdukai wrote:
Sun Feb 03, 2019 4:14 am
You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc.
Did it. Doesn't work.
I just tried it with the "MONO CV TO POLY" for gate and it's working ;)

Quick dirty 4-voice test patch:
https://www.youtube.com/watch?v=Lw-hCLhYEA4
That's nice but I can't make heads or tails of that video because the screen print is too small.
are you seeing it in 1080p60 fullscreen?
Isn't that big enough to check that simple patch?! :?

User avatar
wagtunes
KVRAF
14893 posts since 8 Oct, 2014

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 5:27 am

Koshdukai wrote:
Sun Feb 03, 2019 4:42 am
wagtunes wrote:
Sun Feb 03, 2019 4:40 am
Koshdukai wrote:
Sun Feb 03, 2019 4:29 am
wagtunes wrote:
Sun Feb 03, 2019 4:25 am
Koshdukai wrote:
Sun Feb 03, 2019 4:14 am
You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc.
Did it. Doesn't work.
I just tried it with the "MONO CV TO POLY" for gate and it's working ;)

Quick dirty 4-voice test patch:
https://www.youtube.com/watch?v=Lw-hCLhYEA4
That's nice but I can't make heads or tails of that video because the screen print is too small.
are you seeing it in 1080p60 fullscreen?
Isn't that big enough to check that simple patch?! :?
Yes but I have bad eyes. I'll figure it out.

User avatar
Koshdukai
KVRist
300 posts since 11 Mar, 2007 from Portugal

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 5:37 am

wagtunes wrote:
Sun Feb 03, 2019 5:27 am
Koshdukai wrote:
Sun Feb 03, 2019 4:42 am
wagtunes wrote:
Sun Feb 03, 2019 4:40 am
Koshdukai wrote:
Sun Feb 03, 2019 4:29 am
wagtunes wrote:
Sun Feb 03, 2019 4:25 am
Koshdukai wrote:
Sun Feb 03, 2019 4:14 am
You can use another "MONO CV TO POLY" to convert all the gate cv outs into a Poly gate cable and use that on the Poly Envs, etc.
Did it. Doesn't work.
I just tried it with the "MONO CV TO POLY" for gate and it's working ;)

Quick dirty 4-voice test patch:
https://www.youtube.com/watch?v=Lw-hCLhYEA4
That's nice but I can't make heads or tails of that video because the screen print is too small.
are you seeing it in 1080p60 fullscreen?
Isn't that big enough to check that simple patch?! :?
Yes but I have bad eyes. I'll figure it out.
oh ok, sorry then :/

If you don't figure it out by the time I come back home, I'll do it step-by-step. Should be easier to follow that way :)

User avatar
Koshdukai
KVRist
300 posts since 11 Mar, 2007 from Portugal

Re: Cherry Audio Voltage modular

Post Sun Feb 03, 2019 8:45 am

Koshdukai wrote:
Sun Feb 03, 2019 5:37 am
wagtunes wrote:
Sun Feb 03, 2019 5:27 am
Yes but I have bad eyes. I'll figure it out.
oh ok, sorry then :/

If you don't figure it out by the time I come back home, I'll do it step-by-step. Should be easier to follow that way :)
See if this helps then (made it in a hurry, sorry)

https://youtu.be/in8YjMSu-04

Return to “Instruments”