Arturia VCollection 7 Official thread

VST, AU, AAX, etc. plug-in Virtual Instruments discussion
User avatar
WatchTheGuitar
KVRAF
2372 posts since 30 Apr, 2019

Post Sun Jul 12, 2020 1:42 pm

Ah fair enough. I'm still on V Collection 6, so these updates are probably not for me. Though the Stage update may come through for me yet.

Arashi
KVRist
112 posts since 9 Apr, 2005 from Japan

Post Sun Jul 12, 2020 8:41 pm

As far as I can tell, Arturia just accidentally included the note about the convolution reverb engine in the common section of update notes that was copied and pasted to all the instruments, when it should have only been attached to whichever plugin they added it to (I don't even remember which one it was).
Stormchild

User avatar
Biome_Digital
KVRian
899 posts since 9 Jan, 2014 from Worldwide

Post Sun Jul 12, 2020 11:04 pm

Arashi wrote:
Sun Jul 12, 2020 8:41 pm
As far as I can tell, Arturia just accidentally included the note about the convolution reverb engine in the common section of update notes that was copied and pasted to all the instruments, when it should have only been attached to whichever plugin they added it to (I don't even remember which one it was).
I thought that too. It's the only explanation.

functionform
KVRian
524 posts since 13 May, 2017 from Virginia

Post Wed Jul 15, 2020 6:42 am

New convolution engine probably means the technology that powers the reverb itself. They might have swapped it out because the old one was too cpu heavy for example, which wouldn't result in any new gui or or selectable reverbs.

User avatar
c_voltage
KVRAF
1709 posts since 16 May, 2004 from Soviet Union

Post Wed Jul 15, 2020 9:41 am

functionform wrote:
Wed Jul 15, 2020 6:42 am
New convolution engine probably means the technology that powers the reverb itself. They might have swapped it out because the old one was too cpu heavy for example, which wouldn't result in any new gui or or selectable reverbs.
I assume it's typo (wrong copy\paste) nonetheless, at least regards implementing in all plugins. Because
c_voltage wrote:
Sat Jul 11, 2020 8:20 pm
...and in MiniV no reverbs at all, as before).

SoulState
KVRist
164 posts since 30 Dec, 2008

Post Thu Jul 16, 2020 10:18 pm

Does anyone know, how to make oscillators free-running or randomize starting phaze in CZ-V?
Synced osc's produce terrible phasing with unison...

SharksFin
KVRist
137 posts since 6 Nov, 2003

Post Sat Jul 18, 2020 4:29 am

anyone else had any interface issues in the standalone versions since the last update?

like mouse clicks not registering and stuff

adamjay
KVRist
98 posts since 1 Sep, 2004

Post Sat Jul 18, 2020 10:39 am

Mouse clicks registering fine for me, but I do occasionally get some GUI black out when resizing the interface, not nearly as much as before the latest update, however.

macOS Catalina, 16" MBP with 5500M GPU

Arashi
KVRist
112 posts since 9 Apr, 2005 from Japan

Post Sat Jul 18, 2020 8:11 pm

adamjay wrote:
Sat Jul 18, 2020 10:39 am
Mouse clicks registering fine for me, but I do occasionally get some GUI black out when resizing the interface, not nearly as much as before the latest update, however.

macOS Catalina, 16" MBP with 5500M GPU
I’m still seeing some of that as well. The easiest fix is to just click in the top left corner of the black area, which opens the settings menu and thereby forces a full UI redraw. Easier than closing and reopening the window.
Stormchild

User avatar
waltercruz
KVRAF
1922 posts since 4 Dec, 2011 from Brasília, Brazil

Post Wed Jul 22, 2020 7:35 pm

oops, did a mistake. nothing to see here guys :)

Chrisk-K
KVRist
113 posts since 4 Jun, 2020 from USA

Post Sun Jul 26, 2020 1:40 pm

Is there a way to enter a numeric value (e.g., cutoff = 230 Hz on the Jupiter-8V) rather than moving a virtual knob or slider with a mouse?

Arashi
KVRist
112 posts since 9 Apr, 2005 from Japan

Post Sun Jul 26, 2020 3:56 pm

Chrisk-K wrote:
Sun Jul 26, 2020 1:40 pm
Is there a way to enter a numeric value (e.g., cutoff = 230 Hz on the Jupiter-8V) rather than moving a virtual knob or slider with a mouse?
Not that I know of, but you can right-click and drag any control for maximum precision. I believe this works in any Arturia plugin. I wish everything worked like Fabfilter, where you can double-click any control and enter the value numerically. A lot of plugins use double-click to mean "reset to default", and that's super useful too…maybe the numeric input popup could also have a "reset" button to accomodate that. Or we could settle on double-click = reset, alt + click = enter numerically. Whatever the case, it would be great if there was a universal standard.

One other thing I really like that should become a universal: in all Softube plugins, any control that has numbers for specific positions lets you click the number to snap to exactly that position.
Stormchild

Chrisk-K
KVRist
113 posts since 4 Jun, 2020 from USA

Post Sun Jul 26, 2020 4:57 pm

Arashi wrote:
Sun Jul 26, 2020 3:56 pm
Chrisk-K wrote:
Sun Jul 26, 2020 1:40 pm
Is there a way to enter a numeric value (e.g., cutoff = 230 Hz on the Jupiter-8V) rather than moving a virtual knob or slider with a mouse?
Not that I know of, but you can right-click and drag any control for maximum precision. I believe this works in any Arturia plugin. I wish everything worked like Fabfilter, where you can double-click any control and enter the value numerically.
I hoped for a secret trick :-) Too bad. Ctrl + left click and drag gives us maximum precision in Arturia VSTi’s.

Arashi
KVRist
112 posts since 9 Apr, 2005 from Japan

Post Sun Jul 26, 2020 11:51 pm

Chrisk-K wrote:
Sun Jul 26, 2020 4:57 pm
I hoped for a secret trick :-) Too bad. Ctrl + left click and drag gives us maximum precision in Arturia VSTi’s.
Yes, that's equivalent to right-click on a Mac. If you have a mouse that supports right-click, you can just use that, or you can hold control (which works nicely, because it gives you more control).
Stormchild

User avatar
exmatproton
KVRAF
2786 posts since 25 Apr, 2011

Post Sun Jul 26, 2020 11:53 pm

Chrisk-K wrote:
Sun Jul 26, 2020 4:57 pm
Arashi wrote:
Sun Jul 26, 2020 3:56 pm
Chrisk-K wrote:
Sun Jul 26, 2020 1:40 pm
Is there a way to enter a numeric value (e.g., cutoff = 230 Hz on the Jupiter-8V) rather than moving a virtual knob or slider with a mouse?
Not that I know of, but you can right-click and drag any control for maximum precision. I believe this works in any Arturia plugin. I wish everything worked like Fabfilter, where you can double-click any control and enter the value numerically.
I hoped for a secret trick :-) Too bad. Ctrl + left click and drag gives us maximum precision in Arturia VSTi’s.
Right-click-drag does the same on Windows

Return to “Instruments”