New organ VST plugin

VST, AU, AAX, etc. plug-in Virtual Instruments discussion
lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Sat Aug 21, 2021 7:10 am

I am not using Reaper, but Studio One.
I'll try.

lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Sat Aug 21, 2021 10:39 am

With Studio One only No_act is recognized.
Mute does not work.
And ttm000_x64_no_avx causes Studio One to crash.
With Cakewalk, ttm000_x64, ttm000_x64_avx, ttm000_x64_no_avx are recognized.
Cakewalk does not crash (normal, this is the most stable of the daw)
Everything works, and ACT MIDI Controller allows you to control the faders from the "Motif XS" ... perfect.
The only thing, if we put all the 0-10 faders to zero, there is still sound.
Where midi learning, or manual assignment would be perfect is to use it in Standalone with Savihost

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Sun Aug 22, 2021 4:34 am

Thanks for confirming it works.
The reason why the sound comes out even when the fader is set to 0 is because the original is also designed that way.
Can you tell me more about what MIDI learn should do?

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Sun Aug 22, 2021 7:36 am

About sound when fader 0, I understood your pointing out.
I'll fix this, thanks!

lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Sun Aug 22, 2021 8:31 am

Assign a slider to a midi event
This goes through the midi CC event (0xB0)
Data transmitted
Example CC standarts events
volume:
0xB0 - 0x07 (Volume) - Data (0-127)
Balance:
0xB0 - 0x07 (Balance) - Data (0-127)

For the sliders, depending on the Hardware, the command can be fixed or programmable as on the "Motif XS6"
It's better to choose free orders.
0xB0 - Cmd - Data (0-127)

Pitch Bend is not a CC event
in Binary 1110 CCCC - 0LLL LLLL - 0MMM MMMM
where CCCC is the MIDI channel, LLLLLLL is the LSB of the pitch bend value and MMMMMMM is the MSB.

To test, use Midi-OX

The easiest solution is to do a manual assignment:
We click on one of your commands and we enter the values ​​manually (this is already sufficient)

MIDI-LEARN
We click on a MIDI-LEARN button
Then on one of your commands
We activate the slider on the hardware, you read the values ​​sent and you assign automatically.

lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Mon Aug 23, 2021 11:12 am

Finally for the standalone, it's settled.
I use VstHost (Hermann Seib) which allows MIDI learning instead of SaviHOST.
Only works with ttm000_x64_no_avx.
You do not have the required permissions to view the files attached to this post.

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Mon Aug 23, 2021 4:11 pm

Thanks for the confirmation.
I guess it would be better to include no_avx in the distribution package for the 64bit version.
As for MIDI Learn, ttm000 doesn't have GUI, so I need to be creative to implement the function, but we will continue to consider it.

lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Mon Aug 23, 2021 4:24 pm

Most importantly, turn off the sound if we set all 0-10 faders to zero

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Tue Aug 24, 2021 6:22 am

Fixed the problem of sound when the fader is set to 0.
However, just like the actual organ, there is a little sound even when the fader is set to zero.

https://drive.google.com/file/d/19Kyh20 ... sp=sharing

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Tue Aug 24, 2021 6:25 am

As for the MIDI Learn, I'm going to assign it to a fixed CC event that is not being used at first, and change it in the configuration file at a later date.

lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Wed Aug 25, 2021 3:44 am

Does not work, crashes the sound card.
I tested my B3 with all the drawbars at zero ... No sound.
If you are interested, I can provide you with samples for my B3.

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Wed Aug 25, 2021 5:50 am

Do you have a real B3?
That's amazing!
I'd love to hear about it.
I've never touched a real B3, so I developed this plugin based on information I gathered from the web.
As for the leak sound (the sound when the fader is 0), I will change it so that there is no sound.
You can do the same thing by setting the fader as close to 0 as possible if you need to.

lucienz
KVRist
37 posts since 20 Sep, 2010 from Paris

Post Wed Aug 25, 2021 6:05 am

Your last plugin is not working

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Wed Aug 25, 2021 6:13 am

Sorry, I'll investigate.

User avatar
ttm_mari
KVRist

Topic Starter

61 posts since 13 Aug, 2021

Post Wed Aug 25, 2021 7:06 am

Some features have been disabled to prevent crashes.
The phase shifter is not functioning, but I think it will sound better.

https://drive.google.com/file/d/19Kyh20 ... sp=sharing

Return to “Instruments”