MeldaProduction

mesaone · Post by **mesaone** » Tue Nov 28, 2017 10:11 pm

I have my custom MAutoDynamicEQ preset saved as default. When I instantiate the plugin it loads my preset as it should, but the analyzer settings are not retained. In order to get the settings back, I have to click Settings in the analyzer area, click Presets, then load my analyzer settings preset.

Is this a bug, or am I skipping a step that enables analyzer settings to be retained in the preset?

DarkStar · Post by **DarkStar** » Wed Nov 29, 2017 11:53 am

It's all OK here (v11.09)

I set all the analyzer graphs to display, then saved the MADynEq preset, removed the plug-in, reloaded it and the preset. All the analyzer graphs were enabled.

mesaone · Post by **mesaone** » Wed Nov 29, 2017 4:19 pm

When loading a MAutoDynamicEQ preset the state of the analyzer enable/disable button is recalled correctly, but it does not recall analyzer settings (main settings, analysis, graph, sonogram, pre-filtering). This means I have to load two levels of presets every time - first the MAutoDynamicEQ preset, and then the analyzer preset.

I'll post the contents here, just in case.

Main preset:

Code: Select all

<?xml version="1.0" encoding="utf-8"?>
<Directory Name="Custom">
	<preset compressed="1" name="m_default">
		$eNrtGk1v6jjw3l8RWXstJCR8SYQnCuW1EhTUVK+7Ry8xxGpip45T4B3eb9+xnZQA7arV7mG3yhwgnhnPl+1MNOPBt10SWy9EZJQzHzkNG1mErXhI2cZHuVxf9tC34cUgFSQj0hrzOMZpRsJRLvn18xIzEsMsBAQmBRBB0DXDf8Yk9BGIGudCECaXevbtxEfjPJM8+TXHUiLrhm6iJc6yh31KfHSztJwWsihbcx8ha8a3B9rM0Gb3QRpTKYkI6E-i+KjfOsO2fOQCco53s+niKuarJ4U1SIYTeDLKUyxgBJMmJJWRduIV9R1Tpu0-wixyeYxU9l+mYKQKnGs7dqvf77c7nQoLeFFweO9wZAnnSr-dsNsVdMDXMsAyF1jqlbHRcPBd4DQaDlJOmbQme-CGrrJGEGEVouA5x4KEyKrG-1nJ7dpdx+4iS5pQ8m0QkXh9s0DW78rwTrdzMOsPo+kGi4QzkN4cDgpFKgJalTUReAvbY85DYriX2qBpjDfZFUj0HNR8C2ntdJT36hcYmqeCAaVd+6ceLgl+0r61IKTOl-XNa-3f1u3v-enZX3Wt3IbzZc+Y22h-tTOmXuvVV6Tb6P-3jlrTJIOLwUgQnKl0RxPIc-d8m5nJQGE43v8kwhrFaYSVn20XWSV2HGEG2duYOKc7oMBnAN6QGWEbk5BarqcyewJJiWacmbBpAydkhfeKpeN5lXg65fNjRNgNDUNi0ugdFwmOdRqG0T3JeJyrtBaC25ddQAUxV5EHWYFOh4yolAkpUeXEgOdiZfQ+UhbybfG9AParyAqypjFkTIj3R+KuQ3yUi99dCe+UrVlVplTzFRjKha0+jLjw0aQ7aV9fT6fIIOBbZNy9ak1GClON0pTG5rtpATEXNCTFfMAEEd-q0Q8c50QvpvUQ0dWTcqhZUeqUSjvtru32qkrbTs8zmOpWP9NVldYqpdkaqtIgHJ7jnrpwbvmbVroHuZ0TuXa-67mjT1npVVmBcNicpZrRuDT-TNDwt1ENNdRQQw011FBDDTXUUEMNNdRQQw011FBDDZ8A3x80D4XY4SDgjG8ETg59h263h84qtzEXmana2mXV2baL6rBTYnp2pV6sC7uvFWRXYabTSk3Z85Eaa4yq1petDtUL0fcVct2EENYoxKnqP4ziDRdURomPJmSN81jqiwMl+QqLTDcl7sgLEaMkjel6r4vUpiWh5Wc0g7mUFeXrByw2RL5BGRY2XLMXorod-1qP6FgsqCmsnwrynBO22s8ps15UM8FHLR37cw68O3CoVQCmIMUrcsvmdDejCZUl-dIz1KMAfMan8-6LcuXSWHbKbmv21vsk96PdG63E2N582-jXUBa7BHbNbLrIVCetcrtFDe+4JCeoOewduny906HbbytJX8iyuDhjLsJUcbfFRZc3SHf6nopu4s21vOEAVkKFnYZE-S9yqf4eaSijebkaVrU7VRyzZskCM9JcbtXooeyVqMNkjs8PmlHd29OTbhmwVrg63rtcW-xC1lwkD5UmY-UgV6YX5q8iTFlFuG13vHPhr5wfUVCIaJZeHjlo3hjH0otgfEB0MV9FsliJi0HTXIYaXvwFxkJaqA==
	</preset>
</Directory>

Analyzer section preset:

Code: Select all

<?xml version="1.0" encoding="utf-8"?>
<MSpectralAnalyzerpresets>
	<preset compressed="1" info="" name="Fahrvergnügen">
		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
	</preset>
	<preset compressed="1" name="Default">
		$eNrtmcFymzAQhu9+CkbTa2JhwOAZyxlim8mhaTN1pjmrRjaaCq1H4NrO03cFIaZ2eshd3wW0u+y-u3BapnfHUnl-hKkkaEb8W0o8odeQS71lZF9vbhJyNxtMd0ZUovZStSs4I-Q2CoiXaq5Or8LMC661UI+QC0Ye5RE9mJBvxVeht3Vhw0dBSLw5lDtuZAV6qfkvhcE+8RZizU82ZBxiSOvIG097-1II-SDzXGB1WJvUG2CEeJqXVozXNfG+gSm5kq+iifghKlD7GtvJ7xm5idG0UrBDJ+ZflQB1oUVVWUlKIzTB3qzbWl6kzuHwfLLBD9gTmU2fjNhIVQuD8-AWhh-w2jZKrRekrr1M8W2FWn6IOY52iAH16WgymUTjMRn+Lyy8DBv2xXDmTwbWWCkYiqNTYBhZxItoucwy0hpGjMzj+9EitZb+6DKpVHPzHV+Ekbl4ex4tqwIOzeknV3tRNbbnQq5-246GfVW-Ux1HMQ2SvmrkJ2FreVelH4j9k27UpaMN-XQ4kdAPLpu4rv3jOoNz4vFFYjqJwyD9XJ1hP9Z6zp9tJ5TOuw6uUs2+pA6Hw+FwOBwOh8PhcDgcDofD4fgEjE2H50XsbDBdgYat4eX5l0QcJ+R6d6vAVO3elnarZ0rfNsR+Z0lob2fcrHbft8iBtWRZb68cMmLPjcVqDNt-I7PBX0oqmhw=
	</preset>
</MSpectralAnalyzerpresets>

DarkStar · Post by **DarkStar** » Wed Nov 29, 2017 5:34 pm

I'm not sure what to do with those files

mesaone · Post by **mesaone** » Wed Nov 29, 2017 6:25 pm

Don't do anything with them. That post was to clarify the issue I'm experiencing, and to post the presets in case Vojtech sees this thread and can point to an issue with the contents of either.

jmg8 · Post by **jmg8** » Wed Nov 29, 2017 7:33 pm

I don't think the analyzer settings are supposed to be stored with the preset.

mesaone · Post by **mesaone** » Wed Nov 29, 2017 10:03 pm

jmg8 wrote:I don't think the analyzer settings are supposed to be stored with the preset.

I'm fairly certain that previous versions did. I don't remember having to load analyzer presets in previous iterations of MAutoDynamicEQ. The current version of MEqualizer does save the analyzer settings with the main preset, I just tried it out..

Something must be wrong with my preset, but no worries, I'll make a new one with the same settings and delete the old.

DarkStar · Post by **DarkStar** » Thu Nov 30, 2017 10:05 am

Hmm, well here (v11.09) the Analyzer settings are stored in MADEQ's presets.

Attached is an MADEQ preset; Import it in the plug-ins preset browser, then load it. Check the Analyzer's Settings for Sonogram and the Graphs.

<< Attachment removed by me >>

mesaone · Post by **mesaone** » Thu Nov 30, 2017 3:50 pm

Thanks DarkStar, your preset worked fine. Analyzer settings must have been retained because it's completely different than the default - yours has black graphs and a different sonogram color palette.

This reinforces my conclusion that there's something wrong with my old preset, rather than a bug in the plug-in.

DarkStar · Post by **DarkStar** » Thu Nov 30, 2017 4:24 pm

Yep, I've never used those Analyzer settings, I just chose them for this test.

MeldaProduction

KVR Audio

MAutoDynamicEQ 11.09 preset not saving Analyzer settings