SoloRack v1.3 Eight new modules

Modular Synth design and releases (Reaktor, SynthEdit, Tassman, etc.)
User avatar
S0lo
KVRian
625 posts since 31 Dec, 2008

Post Sat Apr 28, 2018 9:34 am

Hi all, We're glad to announce that SoloRack Version 1.3 has been released. Including 8 new
modules. Some of them are included in the “System B”.

Download: http://www.solostuff.net/wp-content/upl ... tup1.3.zip

Newmodsv1.jpg
Newmodsv2.jpg
New in this update:

- Added S713 Swing/Rotate Clock Divider/Multiplier
- Added S626 Dual Band Phaser. (Included in System B)
- Added SE10 Dual Volt Meter. (Included in System B)
- Added S702 Reset Clock Divider. (Included in System B)
- Added S225 Allpass Phase Shifter
- Added S609 VC Bit Crusher. (Included in System B)
- Added S902 EG/LFO Level Converter. (Included in System B)
- Added S906 Envelope Follower
- Custom per module clip level. Through right click menu. Details here

Note: some DAWs like cubase can't allow a synth to act as an effect. For those, you have to also download the FX version (if you like to use SoloRack as an effect). First install SoloRack above, then place the FX version files in the folder where you installed SoloRack. This will be automated in the next release.



-------------------------------------------------------------------
Version 1.2
Download: http://www.solostuff.net/wp-content/upl ... up1.21.zip
New in this update:
- Support for 3rd party developer modules. (Still in alpha stage)
- Added S525 VC Envelope Generator/LFO
- Added S213 Morphing VCF. (Included in System B)
- Added S620 Frequency Shifter.
- Added SE06 Hardware Tuner. (Included in System B)
- Added S607 Aliasing Waveshaper.
- Added a few more presets demonstrating some of the new modules
- A few fixes here and there.
You do not have the required permissions to view the files attached to this post.
Last edited by S0lo on Fri Oct 05, 2018 11:03 am, edited 3 times in total.

kokotte
KVRian
698 posts since 17 Sep, 2014

Re: SoloRack v1.2 Five new modules

Post Mon Jun 25, 2018 10:39 pm

:tu:

Whywhy
KVRist
180 posts since 11 Aug, 2018

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 7:38 am

I just bought the waveshaper and the frequency shifter, awesome modules.

Solo rack need more love, the quality is so high compared to other modular soft.

User avatar
pdxindy
KVRAF
14026 posts since 3 Feb, 2005 from in the wilds

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 9:36 am

Whywhy wrote:Solo rack need more love, the quality is so high compared to other modular soft.
There are basically no audio demos on the website to show whether this is so

User avatar
fmr
KVRAF
7839 posts since 16 Mar, 2003 from Porto - Portugal

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 9:40 am

pdxindy wrote:
Whywhy wrote:Solo rack need more love, the quality is so high compared to other modular soft.
There are basically no audio demos on the website to show whether this is so
Why don't you download the demo and check that yourself? :shrug:
Fernando (FMR)

User avatar
pdxindy
KVRAF
14026 posts since 3 Feb, 2005 from in the wilds

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 10:15 am

fmr wrote:
pdxindy wrote:
Whywhy wrote:Solo rack need more love, the quality is so high compared to other modular soft.
There are basically no audio demos on the website to show whether this is so
Why don't you download the demo and check that yourself? :shrug:
There is no reason for me to do so. If the sound was really awesome, there would be audio demos showing it off.

Whywhy
KVRist
180 posts since 11 Aug, 2018

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 10:24 am

What I like about Solorack is the audio rate modulation, they are really good, the low CPU usage, even with 8x oversampling, the stability...
Try to modulate, at audio rate, a pwm or a delay, a chorus, a frequency shifter...
The modules have no latencies, perhaps a little if you chain a lot of them in serie, but compare to vcv it's an other story.
The presets are not my favorite part of the soft.

The architecture is kind of open, with 8 in/out, you can build an audio fx in solorack, use it in a daw vst mixer slot, insert a vst fx of your choice, send the output to another solorack, send some gate or lfo from your daw or from a plug, use it like CV.....a lot of things can be done.
Since the last version, third parties developers can make some modules for it. I hope some developers will take the time for this project because the basement is solid.

User avatar
fmr
KVRAF
7839 posts since 16 Mar, 2003 from Porto - Portugal

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 11:32 am

pdxindy wrote:
fmr wrote:
pdxindy wrote:
Whywhy wrote:Solo rack need more love, the quality is so high compared to other modular soft.
There are basically no audio demos on the website to show whether this is so
Why don't you download the demo and check that yourself? :shrug:
There is no reason for me to do so. If the sound was really awesome, there would be audio demos showing it off.
Your option :shrug: I, OTOH, trust my ears and my judgement way more than any video on the Internet.
Fernando (FMR)

User avatar
pdxindy
KVRAF
14026 posts since 3 Feb, 2005 from in the wilds

Re: SoloRack v1.2 Five new modules

Post Wed Sep 05, 2018 12:19 pm

fmr wrote:
pdxindy wrote:
fmr wrote:
pdxindy wrote:
Whywhy wrote:Solo rack need more love, the quality is so high compared to other modular soft.
There are basically no audio demos on the website to show whether this is so
Why don't you download the demo and check that yourself? :shrug:
There is no reason for me to do so. If the sound was really awesome, there would be audio demos showing it off.
Your option :shrug: I, OTOH, trust my ears and my judgement way more than any video on the Internet.
You are making an incorrect assumption that I don't trust my own ears and judgement more than what I hear online. Audio demos are not what makes me buy it, they are there to catch my attention enough to bother downloading a demo at all. I have enough synthesis to last the rest of my life... no reason for me to chase stuff that makes no effort to speak to me.

User avatar
S0lo
KVRian
625 posts since 31 Dec, 2008

Re: SoloRack v1.3 Eight new modules

Post Mon Sep 24, 2018 3:08 pm

Version 1.3 released. Details in the first post.

student9v
KVRer
19 posts since 26 Sep, 2018

Re: SoloRack v1.3 Eight new modules

Post Fri Sep 28, 2018 11:42 pm

How do I know what the list of modules in the System B? I liked the sound and possibilities, but I do not understand what modules I buy. I do not know whether this is enough.

User avatar
S0lo
KVRian
625 posts since 31 Dec, 2008

Re: SoloRack v1.3 Eight new modules

Post Sat Sep 29, 2018 12:52 am

Hi student9v.

There are several ways you can know.

1. In our shop. You can click on the "System B" image/picture here and it will show you each module thats included in the System B at a glance. (You can enlarge the image by the way, click on the top-right icon)

2. In SoloRack itself. When you browse the modules menu, a red cross will be shown near the modules that are NOT in the System B. As shown below. If you buy one of those modules, the red cross goes away off that module.
Capture1.jpg

3. In our shop. Modules that are in the System B can NOT be added to the cart. They are not sold separately.

I hope this helps :)
You do not have the required permissions to view the files attached to this post.

student9v
KVRer
19 posts since 26 Sep, 2018

Re: SoloRack v1.3 Eight new modules

Post Sat Sep 29, 2018 4:31 am

S0lo wrote:
Sat Sep 29, 2018 12:52 am
I hope this helps :)
Thank you, Ammar.

Do you plan to make a simple sampler for percussion samples?

User avatar
S0lo
KVRian
625 posts since 31 Dec, 2008

Re: SoloRack v1.3 Eight new modules

Post Sat Sep 29, 2018 6:27 am

student9v wrote:
Sat Sep 29, 2018 4:31 am
S0lo wrote:
Sat Sep 29, 2018 12:52 am
I hope this helps :)
Thank you, Ammar.

Do you plan to make a simple sampler for percussion samples?
Haven't planned it yet. Do you have something specific in mind?

student9v
KVRer
19 posts since 26 Sep, 2018

Re: SoloRack v1.3 Eight new modules

Post Sat Sep 29, 2018 6:41 am

S0lo wrote:
Sat Sep 29, 2018 6:27 am
student9v wrote:
Sat Sep 29, 2018 4:31 am
S0lo wrote:
Sat Sep 29, 2018 12:52 am
I hope this helps :)
Do you plan to make a simple sampler for percussion samples?
Haven't planned it yet. Do you have something specific in mind?
I'm using Tassman. It has a simple sampler - for example, vintage drum machines.

player.jpg
You do not have the required permissions to view the files attached to this post.

Return to “Modular Synthesis”