Bitwig Studio 1.3.1 RC-3

Official support for: bitwig.com
User avatar
volker@bitwig
KVRist
367 posts since 29 May, 2005 from Berlin

Post Wed Nov 04, 2015 3:20 pm

Hello everybody,

Bitwig Studio 1.3.1 RC-3 is available for download on http://www.bitwig.com/en/download.html. Here is the list of changes:

FIXED - Moving a device which had send automation for a nested device chain into a slot did not delete the modulation but did delete the send leaving modulation to a non-existant send knob.
FIXED - Automation to a nested device chain's send knob remains when moving the device containing chain into a slot (which deletes the send).
FIXED - Moving (or copying) an instrument layer into a slot of a device after the instrument layer (eg LFO Mod) does not delete the send knob on the layer.
FIXED - Note editor layer name can become too wide.
FIXED - Playback does not work until manually removing audio input bus on OSX when choosing audio input from external hardware and then starting the app later without that hardware.
FIXED - Bounce-in-place result in empty clip if play-head is after the clip and enough plug-in latency was used.
FIXED - Size of DSP performance graph flickers in some cases on OSX.
FIXED - Controlling send amount via controller API does not work correctly after reordering FX tracks.

Cheers,
Volker
Volker Schumacher, developer at http://www.bitwig.com

Uplay
KVRist
86 posts since 8 Apr, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 3:39 pm

volker@bitwig wrote:Hello everybody,

FIXED - Bounce-in-place result in empty clip if play-head is after the clip and enough plug-in latency was used.
Wow, let's check that out. Thanks Volker! :party:

codec17
KVRAF
1514 posts since 14 Feb, 2010

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 4:09 pm

volker@bitwig wrote: FIXED - Controlling send amount via controller API does not work correctly after reordering FX tracks.

Cheers,
Volker
Ah nice just wanted to ask this one!!! :party: :tu:

c-wave
KVRian
631 posts since 31 May, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 4:32 pm

Nice.. thanks Bitwig.

User avatar
Ogopogo
KVRAF
2562 posts since 1 Oct, 2013

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 5:44 pm

I just had a bug with tooltips appearing at the very top of the screen rather than next to what I was hovering over. This was in fullscreen so I toggled fullscreen off and on again and it went away. Not sure if I can reproduce. OSX.

User avatar
dodge-and-fuski-rob
KVRist
53 posts since 17 Dec, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 6:57 pm

Not sure if this is new with rc-3 as this is the first time ive used 1.3.1, but on my retina macbook 15" whenever you have automation visible, the channel header GUI no longer lines up with the track contents properly.. (see attachments)

Screen Shot 2015-11-05 at 12.54.54.png
Screen Shot 2015-11-05 at 12.54.45.png
You do not have the required permissions to view the files attached to this post.

User avatar
dodge-and-fuski-rob
KVRist
53 posts since 17 Dec, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 7:01 pm

(note this was automation on a folder channel, in case that helps you recreate the bug)

User avatar
dodge-and-fuski-rob
KVRist
53 posts since 17 Dec, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 7:14 pm

audio performance is also terrible i've noticed, anyone else had this? projects that ran fine in 1.3.0 jitter horrendously hitter buffer issues even at 2048 samples....

i've gone back to 1.3.0 for now, which is a shame as the GUI improvements in 1.3.1 look a lot nicer (bar the glitches)

User avatar
dodge-and-fuski-rob
KVRist
53 posts since 17 Dec, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 7:17 pm

Jesus even 1.3.0 now seems screwed, even after a reboot.... i was on 1.3.0 RC before, but the proper 1.3.0 seems all over the place
Screen Shot 2015-11-05 at 13.16.15.png
You do not have the required permissions to view the files attached to this post.

User avatar
dodge-and-fuski-rob
KVRist
53 posts since 17 Dec, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 7:28 pm

Any chance of getting 1.3 RC1 back online for download? It's not in the release archive and it's the last one that actually ran properly for me.... lost access to a bunch of important stuff I had in the works and assumed it would be safe to update as 1.3.0 was a 'full' release

Late 2013 retina macbook pro 2.6ghz, 16gb ram, OSX 10.9.5

User avatar
WXLF
KVRian
792 posts since 2 Nov, 2014

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 9:21 pm

volker@bitwig wrote: FIXED - Playback does not work until manually removing audio input bus on OSX when choosing audio input from external hardware and then starting the app later without that hardware.
Nice, only reported this 2-3 days ago! :tu:

Thanks

xbitz
KVRAF
2284 posts since 3 Oct, 2013 from Budapest

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 9:22 pm

from the rc2 topic, still in rc3

clip length displaying calculation is buggy using non 100% scaling

https://www.youtube.com/watch?v=oR_9OoElHMw

win10x64

automation playline or whatever it's called still not moving if at least one automation point was added

https://www.youtube.com/watch?v=Yy4OGxHbw3Q
Last edited by xbitz on Wed Nov 04, 2015 9:42 pm, edited 1 time in total.
"Where we're workarounding, we don't NEED features." - powermat

User avatar
dplduffy
KVRist
283 posts since 31 Mar, 2015 from Pittsburgh, PA, USA

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 9:29 pm

Ogopogo wrote:I just had a bug with tooltips appearing at the very top of the screen rather than next to what I was hovering over. This was in fullscreen so I toggled fullscreen off and on again and it went away. Not sure if I can reproduce. OSX.
I've had this happening too but I can't seem to reproduce it reliably so I haven't sent it in. You on El Capitan? I never had this happening on 10.10 but when I upgraded to 10.11 (even though I know it's not supported) this happened.

User avatar
Ogopogo
KVRAF
2562 posts since 1 Oct, 2013

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 9:56 pm

Yes, el cap. That was the first time I noticed it. My whole system in case the devs need it: Mac Mini OSX El Capitan i7 3615QM 2.3GHz Mackie Blackjack

xbitz
KVRAF
2284 posts since 3 Oct, 2013 from Budapest

Re: Bitwig Studio 1.3.1 RC-3

Post Wed Nov 04, 2015 10:02 pm

automation/modulation deletion doesn't change the state of the a automation/modulation (red/green) dots displaying logic, they are stuck into their original state (the restore automation button remains green forever in this case it can't be switched off because BWS can't change back to nonexistent modulations/automations)

https://www.youtube.com/watch?v=H0XrlA2ZZKg

(and automation playline still not moving ... but it has been mentioned above :roll: )
"Where we're workarounding, we don't NEED features." - powermat

Return to “Bitwig”