FREE Schroeder Reverb 1.0 released

Official support for: www.discodsp.com
User avatar
discoDSP
KVRAF
4782 posts since 18 Jul, 2002

Post Sat May 23, 2020 2:00 am

Image

macOS download https://www.discodsp.com/download/?id=12

Modeled reverb based on Schroeder reverberator. Early Schroeder reverberators consisted of the following elements:
  • A series connection of several all-pass filters.
  • A parallel bank of feedback comb filters.
  • A mixing matrix.
The all-pass filters provide colourless high-density echoes in the late impulse response of the reverberator. These all-pass filters may also be referred to as diffusers. While all-pass filters are colourless in theory, perceptually, their impulse responses are only colourless when they are extremely short (less than 10 ms or so). Longer all-pass impulse responses sound similar to feedback comb-filters. For steady-state tones, however, such as sinusoids, the all-pass property gives the same gain at every frequency, unlike comb filters.

The parallel comb-filter bank is intended to give a psychoacoustically appropriate fluctuation in the reverberator frequency response. A feedback comb filter can simulate a pair of parallel walls, so one could choose the delay-line length in each comb filter to be the number of samples it takes for a plane wave to propagate from one wall to the opposite wall and back.

Thus, one may choose the comb-filter delay-line lengths more or less arbitrarily, and then use enough of them in parallel (with mutually prime delay-line lengths) to achieve a perceptually adequate fluctuation density in the frequency-response magnitude. In four such delays are chosen between 30 and 45 ms, and the corresponding feedback coefficients are set to give the desired overall decay time.
Synthesizers • Bliss sampler • FX bundle • Soundware
https://www.discodsp.com/

Return to “discoDSP”