Page 1 of 1

free Impulse Responses

PostPosted: Mon Nov 08, 2004 3:49 am
by Pantsdown666
Free IMPULSE RESPONSES

Noisevault - large collection
http://noisevault.com/nv/

Echochamber - another large collection
http://www.memi.de/echochamber/responses/index.html

Voxengo
http://www.voxengo.com/impulses/

Impulse Response.org
http://www.impulseresponse.org/index.html

Prosoniq (need AIFF to WAV conversion0
http://www.prosoniq.net/html/ir.html

Kaleidoscopy (12MB free available in demo version)
http://www.spiritcanyonaudio.com./kaleidoskopy.php

Lexicon PCM-90
http://homepage.hispeed.ch/zidee/

KangImp
http://www.geocities.com/kangimp/
Reverbs, FX incl. chromatic piano resonance

IR of the Month
http://www.cksde.com/p_6_250.htm
(monthly collections, includes good basic description of Impulse Response technology)

Fokke van Saane
http://www.xs4all.nl/~fokkie/IR.htm
(includes some great specialist spaces for sound designers)

Sanitarium demo
http://www.spiritcanyonaudio.com/sanitarium.php
(18 MB of IRs in the demo version of this plug)

Spectral Relativity demo
http://www.spiritcanyonaudio.com/spectralrelativity.php
(11 MB of IRs in the demo version of this plug)

MoreVox
http://www.morevox.com/
reverbs, real spaces, FX, Madrid Metro

watertank by tank-fx.de
http://adminx.de/roman/_laut8leise/IR/TankFX01.tar
1 x IR, 16 bit, spike, jbl control one, rode nt-5, some street noise.
altiverb version. try violin and voice.

re-201 space echo
http://www.device.arcanedevice.com/?misc

Cyber Kitchen Sound Design Enterprise - via Voxengo
http://www.voxengo.com/pspace/

Samplicity
http://www.samplicity.com/download/index.html

ColorToneIR Library
http://tritonedigital.com/forum/index.php
forum appears when you register.

Sony Acoustic Mirror
http://www.sonymediasoftware.com/downlo ... sp?CatID=6

1-1-1 net impulses
http://www.1-1-1-1.net/pages/impulses/index.htm

Concert Hall impulses (Finland)
http://www.acoustics.hut.fi/projects/poririrs/

Intelligent Machinery - experimental IRs
http://www.intelligentmachinery.net/pro ... eshold.php

Acoustics Engineering examples
http://www.acoustics-engineering.com/dirac/examples.htm

Beamsonic - microphones, tape, amps, hardware
http://noox.sitesled.com/

JC Productionz free impulses
http://jcproductionz.bravehost.com/impulses.html
real spaces

Syn-Aud-Con Impulse Response Exchange - real spaces
http://www.synaudcon.com/sacirxchange.htm

Borque impulses - 6 rooms, churches
http://home.wanadoo.nl/~borque/impulses/

Rob Stewart - (limestone cave and garage}
http://www.robstewart.com/ir.html

Goldbaby's Impulses - Lexicon LXP-15, MPC. M20 filter clone etc
http://www.goldbaby.co.nz/freestuff.html

Waves freebies - (4)
http://www.acoustics.net/content.asp?id=96

Syverb - some freebies in demo
http://www.sharewarejunction.com/info.a ... ctID=39786

Cabinets etc.
(got these from another thread here, it said "some of those irs require some trimming at the beginning"):
http://annex.ax84.com/l6cabs.zip
http://annex.ax84.com/rash_cabs.zip
http://annex.ax84.com/microcabimpulses.zip
http://annex.ax84.com/Digitrack_Generat ... pulses.zip
http://annex.ax84.com/mr8_impulses.zip

Clarinets and trumpets
http://www.ph.ed.ac.uk/~maarten/thesis_sounds.html

Digitech Rp3 reverbs v2.0
SanSamp Gt2 amp simulations
Zoom 508 delays
http://www.pluggotic.com/products.html

Guitar cabinets - mainly Peavey 5150
http://www.esnips.com/web/KeiffersGuitarClips

SpACE-Net (4 spaces) :
Maes-Howe Passage Tomb Orkney, Hamilton Mausoleum, St Andrews Church Lyddington, and York Minster.
http://www.space-net.org.uk/IRs.html

Emes Virtual rooms (9 free examples)
http://www.emes.de/pageseng/products/Im ... mpulse.htm

Clipgod
Ursa Major's Space Station, Kurzweil's KSP8 reverbs
http://www.wizomail.de/clipgod/projects.htm

Mesa Boogie
Guitar amp cab impulses (3)
http://www.sneapforum.celtiaproductions ... mpules.zip

Airwindows Impulses
Outdoor blastoff, outdoor stadium, plate reverbs, rooms, pool
http://www.airwindows.com/f/AirwindowsImpulses.zip

Intelligent Machinery - "Unnatural Spaces"
Glass vase , plastic human skull, wooden box etc. etc .
http://www.intelligentmachinery.net/?q=node/126

T1mp impulses
Various room spaces
http://www.t1mp.net/utilities.cfm

PostPosted: Mon Nov 08, 2004 5:24 am
by CinningBao

PostPosted: Mon Nov 08, 2004 5:26 am
by meister eder
One to add:

Fokke van Saane
http://www.xs4all.nl/~fokkie/IR.htm

PostPosted: Mon Nov 08, 2004 5:53 am
by CinningBao

PostPosted: Tue Nov 09, 2004 8:28 am
by Pantsdown666
(edit) link gone

PostPosted: Tue Nov 09, 2004 8:38 am
by Pantsdown666
and another :

Spectral Relativity demo
http://www.spiritcanyonaudio.com/spectralrelativity.php
(11 MB of IRs in the demo version of this plug)

PostPosted: Tue Nov 09, 2004 8:49 am
by Whoomph
Thanks guys ,
just get sir out and give it a bit of a spit and polish

again thanks for the links , I only (well...) had noisevault before

:smile:





--

xxxx xxxxx xxxxxxx xxxxxx ! and I'm serious too !

PostPosted: Wed Nov 23, 2005 7:40 pm
by Pantsdown666
Just added several new links to the first post

PostPosted: Tue Sep 12, 2006 8:36 am
by Pantsdown666
... and another year goes by .....
Digging up this two-year-old thread :
Have added many more links to the first post, enjoy it :D

PostPosted: Tue Sep 12, 2006 9:13 am
by t-willy
nice!

throw those links here:

http://www.kvraudio.com/forum/viewtopic ... sc&start=0

(its a sticky at the top of the effects forum)

lates

t-willy

PostPosted: Tue Sep 12, 2006 9:58 am
by waiting man
three packs, bottom of this page.

PostPosted: Tue Sep 12, 2006 10:00 am
by Vonbrucken
thanks every one :D

PostPosted: Tue Sep 12, 2006 3:18 pm
by Pantsdown666
waiting man wrote:three packs, bottom of this page.


thanks waiting man, added now.

PostPosted: Tue Sep 12, 2006 3:31 pm
by Pantsdown666
t-willy wrote:throw those links here:
http://www.kvraudio.com/forum/viewtopic ... sc&start=0
(its a sticky at the top of the effects forum)


Thanks t-willy, have done so, pity it's on page 7 of that thread, hopefully "LIMITAPPROACHING.." can copy it into the first post, as I also incorporated the links from that thread.

PostPosted: Wed Sep 13, 2006 7:33 am
by chrishurley
I also have another couple of sets that I posted:

http://annex.ax84.com/rash_cabs.zip
http://annex.ax84.com/microcabimpulses.zip

Someone said my other impulses need trimming, but I've not had any problem with them. If someone wants to fix them and let me know, I'll replace those that I'm hosting.

PostPosted: Wed Sep 13, 2006 2:54 pm
by Pantsdown666
chrishurley wrote:I also have another couple of sets that I posted:

http://annex.ax84.com/rash_cabs.zip
http://annex.ax84.com/microcabimpulses.zip

Someone said my other impulses need trimming, but I've not had any problem with them. If someone wants to fix them and let me know, I'll replace those that I'm hosting.


Thanks Chris, I've added them to the list. Where are these from originally? Did you make them?

PostPosted: Wed Sep 13, 2006 2:56 pm
by chrishurley
Pantsdown666: All of the annex.ax84.com zips are files I've captured. The microcab impulses are of the ADA Microcab. The first ones are captured from the demo of a commercial amp sim.

PostPosted: Thu Sep 14, 2006 9:13 pm
by Pantsdown666
chrishurley wrote:Pantsdown666: All of the annex.ax84.com zips are files I've captured. The microcab impulses are of the ADA Microcab. The first ones are captured from the demo of a commercial amp sim.


great, thanks a lot Chris!

PostPosted: Sat Sep 16, 2006 3:52 pm
by el-folie
Are there any IR's of the Lexicon 224 anywhere? Kept searching couple days now, no luck yet. I'm especially looking for an IR that sounds like those looong deep lush Vangelis 224 reverbs.

Anyone maybe knows where to find those?

PostPosted: Tue Oct 31, 2006 12:36 am
by Pantsdown666
Added to first post (taken from another thread) :

SpACE-Net (4 spaces) :
Maes-Howe Passage Tomb Orkney, Hamilton Mausoleum, St Andrews Church Lyddington, and York Minster.
http://www.space-net.org.uk/IRs.html

PostPosted: Fri Dec 29, 2006 9:45 pm
by wsaidah
bump

PostPosted: Fri Dec 29, 2006 10:08 pm
by northland
I Pantsdown. Thanks for the heads up.

PostPosted: Sat Dec 30, 2006 1:49 pm
by Debutante
http://www.xs4all.nl/~fokkie/IR.htm

This site has alot of interesting looking impulses, but most of them are in Mac format. Any suggestions on how I can convert them into wavs, or has anyone who has done so care to share any? The author says it's OK to do so.

PostPosted: Sat Dec 30, 2006 3:33 pm
by CinningBao
I think a few of us convolution fanatics have come across these files and this problem, and iirc the answers are either find a friend with a mac who can rewrite the header information (add the normal windows file extensions to the filename (aiff/aif/something else?) or save them as pcm wav's) so you can read them.

I had no friends with macs until recently, but have had no need to have these particular impulses converted. I'll see if he's got the brain power to do it ;)

PostPosted: Mon Jan 01, 2007 12:22 pm
by Sascha Franck
Those impulses are SDII files and Soundforge will most likely still convert them fine. At least it did so several years ago already...

PostPosted: Mon Jan 01, 2007 3:15 pm
by Debutante
http://www.trbtr.de/g3/inhalt/digiconv_old.htm

anyone know about this little app?

PostPosted: Mon Jan 01, 2007 4:05 pm
by Sascha Franck
Debutante wrote:http://www.trbtr.de/g3/inhalt/digiconv_old.htm

anyone know about this little app?


Yeah, tried it back in the days and it never worked too well, if I remember correctly. Will probably work well on some sort of files though.
Fortunately, by now I got a Macbook and LogicPro, so I can just load the files in there and do all the necessary conversions.
Hopefully we won't see much SDII stuff in the future anymore, as the BMF (broadcasting wave format) easily surpasses it.

PostPosted: Wed Mar 28, 2007 1:39 pm
by guessi

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

Hi,

I found this forum through a referer in a log file, I'm the author of the above mentioned tool "digiconv".

as my little tool is exactly meant to do what is wanted here, I tried it out myself.

1st: the link above leads to a very old version, please find the latest here http://www.trbtr.de/g3/inhalt/digiconv.htm (http://www.trbtr.de/g3/inhalt/digiconv.htm) (although 5 years old already...)

2nd: I tried to convert "small factory hall" from the above mentioned page http://www.xs4all.nl/~fokkie/IR.htm (http://www.xs4all.nl/~fokkie/IR.htm)
it works with the following settings:
input: rawPCM, 24Bit, DualMono, littleEndian (!)
output: wav, stereoL/R, 44100Hz, littleEndian
be sure to add the 2 mono SDII-Files to the sourcefile list in the correct order (1st L, 2nd R), otherwise the stereo channels get swapped...

please reply whether you succeed.

PostPosted: Sat Mar 31, 2007 8:51 am
by Sascha Franck
Hey, guessi, that digiconv tool saved my ass BIG time many many moons ago. I think I even mailed you back then, and you also replied... still, many thanks!

PostPosted: Tue Apr 10, 2007 6:05 am
by Pantsdown666
Just bumping this thread - nothing new to add to my first post, but one of the sites :
MoreVox http://www.morevox.com/
... has just added some new free impulses, the "Ready IR" collection.

PostPosted: Mon May 07, 2007 11:29 pm
by RChler
great hints :)

PostPosted: Wed May 09, 2007 3:57 pm
by Pantsdown666
Added to first post :

Clipgod
Ursa Major's Space Station, Kurzweil's KSP8 reverbs
http://www.wizomail.de/clipgod/projects.htm

PostPosted: Tue May 15, 2007 5:05 pm
by Pantsdown666
Added to first post :

Mesa Boogie
Guitar amp cab impulses (3)
http://www.sneapforum.celtiaproductions ... mpules.zip

"Here are my first 3 Impulses. They were made using Voxengo Deconvolver with the default settings for the "Test Tone". I sent the "Test Tone" out at a level of -45.0 dB through a Line Output of the Firepod and into the "Loop Return" of the Krank Revolution (just before the speakers started to distort at the low end). I am not sure whether the "Presence" Control has an affect when using the poweramp only and this was actually set on 7 (out of 10, didn't occur to me until after I had finished. I was too concerned as to not blow my speakers out of my cab at the time).

I have tested them out quickly and compared them to the Directly Mic'd cab and they are quite close. Slight Mids difference I think but very close (given it was a quick comparison and not the same performance). Anyway, I have read where Splatt says that you have to chop off the tail or you get echo's, I am not to sure what he is referring to, so they may need "that" done.

This has consumed quite a part of my day. I made 9 different wav's with various amounts of mic preamp gain which were deconvolved to both Normalised and non-Normalized Impulses (resulting in 18 Impulses) and tested them to check the differences. These are the Normalised ones. I had 3 Impulses made with the mic in each position ("Centre" is Centre of Dustcap, "Between" is between centre and edge of dustcap and "Edge is on the edge of the dustcap. All are with Mic AGAINST the Cabinet Cloth/Grill) with different mic preamp gain, once normalised I couldn't tell the difference. I tested the ones that had not been Normalised and they delivered various volumes according to their respective levels as I had expected but wanted to confirm.

When I was recording my RAW tracks I did a bit of a comparison and used my Cab as the Load for one set of quad-tracks and my THD Hotplate as the Load for another set of quad-tracks. So far I cannot tell the difference between the tone of the two sets. When using the Cab as the load and taking the signal from the Loop Send of the head there was still some sound from the cab. I was very surprised by this. I have had 2 Revolution heads and I am pretty sure that the first one did not output any sound when I had something plugged into the Send and nothing in the Return, especially since the Rev's have a Serial Effects Loop. I am not sure why this happened. It was quite a bit quiter, but I could hear it through the wall between me and my cab (Cab is in another room). Previous tests with the first head were done in the same room as the cab and I don't remember any noise from the Cab.

A MAJOR discovery was that when using a Mic-Instrument Input on the Firepod from the Loop Send the recorded RAW tone and Impulse Applied Tone was extremely un-natural and distorted sounding although the Clip LED didn't illuminate and the recorded waveform was far from clipping. When using a Mic-Line Input the best results were achieved although I couldn't get a "normal" input level even with the mic preamp level pegged. I generally aim for -10 to leave plenty of room for boosting EQ, etc..., I was much lower than this. I had the Amp Master on 3 which is where I normally have it when I mic the cab, I think this needs to be higher.

Anyway, I would appreciate some of you guys trying them out and giving some feedback. Please if you try them out, find some time for a response. If they turn out to be good, I can always make more and if they are bad I will try to improve them, so let me know please.

Sorry for the long read, just want to share the little I discovered when doing this in hope that it maybe helps someone else out. Some of it may be n00b stuff, but hey, I am a n00b."

PostPosted: Tue May 15, 2007 8:27 pm
by Pantsdown666
Added to first post :

Airwindows Impulses
Outdoor blastoff, outdoor stadium, plate reverbs, rooms, pool
http://www.airwindows.com/f/AirwindowsImpulses.zip
courtesy of http://store.kagi.com/cgi-bin/store.cgi ... EGJ_LIVE&&

These are from Chris at Airwindows plugs.
Here's his description :

"I was gonna sell some of them through Kagi, but I always hated not being able to get free impulses, so they're 'please go buy more AU pluginsware', OK?

http://www.airwindows.com/f/AirwindowsImpulses.dmg

Contains:

OutdoorBlastoff- sounds like a concert 3000 miles away, so loud it explodes the sun. This sound is the crackle of a Space Shuttle takeoff, miles up in the atmosphere. Straaaaaange acoustic phenomena translate to an absolutely unprecedented reverb impulse. However, it's super bass heavy, so be careful

OutdoorStadium- football stadium. Unreasonably long, because this is a synthetic effect it has an extraordinarily clean tail- also on the bass heavy side. The synthetic impulses are NOT made with the Voxengo raytracer, I wrote dedicated software to generate them.

Plate (large, medium, small, super dry)- synthetic plates which I think are unusually good. A lot of this stuff is down to me being a mastering engineer and interested in soundstage depth- to me it's very important that reverb baths are DEEP.

Prime (long, medium, short, xtra long)- an entirely mathematical impulse except for a bit of Nyquist-frequency smoothing. Prime is the same technology that's in my BrightAmbience plugin, but without the gating effect: it's a impulse 'tick' sequence with prime number spacings, calculated in such a way that the output resembles white noise- except that, because of the mathematical characteristics of the prime sequence, the reverb is absolutely colorless for all lower frequencies (it does have a nasty ring for anything that actually reaches the Nyquist frequency, though). It's the ultimate giant glass chamber reverb.

RoomConcertHall- this is a synthetic Concertgebouw. Can be bass heavy, very orchestral quality.

RoomHuge- not kidding. Like a mammoth convention space. Synthetic for perfectly clean tail (again, not the Voxengo raytracer).

RoomLarge- giant drum room, not quite as huge as RoomHuge.

RoomMedium- big drum room, but small enough to be maybe more versatile. None of these rooms are bright like algorithmic verbs, they're pretty dark and distant.

RoomPool- Yes! Probably the most ultimate huge indoor pool impulse in the universe at this time. MONSTROUS and totally synthetic, so the tail is perfectly clean! Unlike the outdoor ones, this one has better controlled bass, so it can also be crushingly loud in the mix- but the ungodly length and sustain of it might make things awfully unmanageable. But in a good way

OK, have fun. I should use these more, now that I have one of the AU conv reverbs with the two output level trims remember, if these change your life and you become rich, famous and very distant, go buy some AU plugs from the link in my sig, they're 'go-buy-other-stuff-I-do-please-ware'

PostPosted: Fri May 18, 2007 3:40 pm
by Pantsdown666
Just noting that the download file in the post above is now a .zip file rather than a .dmg,which means anyone can grab these.

PostPosted: Sat May 26, 2007 2:54 am
by Pantsdown666
Added to first post :

Intelligent Machinery - "Unnatural Spaces"
Glass vase , plastic human skull, wooden box etc. etc .
http://www.intelligentmachinery.net/?q=node/126

" Unnatural Spaces is a free library of impulse responses captured from small objects. The spaces themselves are man-made and are generally of objects that you normally would not, or could not, stick your head inside while listening to music. These impulse responses are designed to impart unique reverb characteristics to your audio. "

Paper baby formula can
Glass candle cup
Glass light flute
Glass vase 1
Glass vase 2
Metal peanut can (large)
Plastic human skull
Shallow cookie tin
Wicker waste basket
Wooden box (small) "

PostPosted: Sat May 26, 2007 5:30 am
by pattonfreak1
Pantsdown666 wrote:Added to first post :

Intelligent Machinery - "Unnatural Spaces"
Glass vase , plastic human skull, wooden box etc. etc .
http://www.intelligentmachinery.net/?q=node/126

" Unnatural Spaces is a free library of impulse responses captured from small objects. The spaces themselves are man-made and are generally of objects that you normally would not, or could not, stick your head inside while listening to music. These impulse responses are designed to impart unique reverb characteristics to your audio. "

Paper baby formula can
Glass candle cup
Glass light flute
Glass vase 1
Glass vase 2
Metal peanut can (large)
Plastic human skull
Shallow cookie tin
Wicker waste basket
Wooden box (small) "

The peanut can is awesome... thanks evil one

PostPosted: Sat Jun 30, 2007 7:33 pm
by Pantsdown666
Added to first post :

T1mp impulses
Various room spaces
http://www.t1mp.net/utilities.cfm

PostPosted: Sat Jun 30, 2007 7:44 pm
by Muzik 4 Machines
nobody mentionned beamsonic's ones?
http://noox.sitesled.com/

PostPosted: Sat Jun 30, 2007 7:51 pm
by Pantsdown666
Muzik 4 Machines wrote:nobody mentionned beamsonic's ones?
http://noox.sitesled.com/


Already in list, you must have missed them. The Beamsonic ones are great.

PostPosted: Sat Jun 30, 2007 8:12 pm
by Muzik 4 Machines
Pantsdown666 wrote:
Muzik 4 Machines wrote:nobody mentionned beamsonic's ones?
http://noox.sitesled.com/


Already in list, you must have missed them. The Beamsonic ones are great.

oups

sorry

PostPosted: Fri Nov 02, 2007 5:49 am
by Pantsdown666
Added to first post page 1 :

Impulse Response.org
http://www.impulseresponse.org/index.html

PostPosted: Tue Jul 14, 2009 9:51 pm
by novaflash
Hi all,
i looking for a filter IR to test/listen it, i've tried many link
provided here without success. I need a good tutorial to generate my
own IR too, a link ?

i've the opportunity to have for few day this gear :
http://www.allen-heath.com/US/xonevf1.asp
my goal is to clone it if possible.

PostPosted: Tue Jul 14, 2009 10:39 pm
by Sascha Franck
novaflash wrote:i've the opportunity to have for few day this gear :
http://www.allen-heath.com/US/xonevf1.asp
my goal is to clone it if possible.


Without some exclusive technology (such as what I think the Nebula guys are using), you will have a really tough time cloning such a unit.
I mean, it's usually not a static impulse you want to capture from an EQ/channel-strip/filter.
So, think about how many useful positions each knob has. Let's start low-ish and say 30. Multiply by 30 for each knob. Assuming you probably don't need gain knobs in a digital emulation, let's assume you only want to capture 4 knobs (this is leaving out the switches already). That's 30 x 30 x 30 x 30 already. 810,000 impulses already. Add one single further parameter and the number doubles. Are you up to the task?

- Sascha

PostPosted: Tue Jul 14, 2009 11:05 pm
by novaflash
thanks Sascha,
project canceled!

PostPosted: Tue Jul 14, 2009 11:08 pm
by tongsong
hey misssed out? veris's best free IR http://www.rhythminmind.net/presetblog/

PostPosted: Tue Jul 14, 2009 11:32 pm
by VSTadapter
hello my friends!!

please, what is the best free tool to play these free impulses??

thanks you very much :

PostPosted: Tue Jul 14, 2009 11:35 pm
by sophtrazor
this site kicks ass!

PostPosted: Tue Jul 14, 2009 11:52 pm
by chj
VSTadapter wrote:hello my friends!!

please, what is the best free tool to play these free impulses??

thanks you very much :

Kefir or Boogex. Boogex is designed as a guitar amp/cab so you have to tweak it a bit to minimize the guitar amp.

PostPosted: Thu Jul 16, 2009 10:10 am
by VSTadapter
thank you very much!!!
are these better than sir??

PostPosted: Thu Jul 16, 2009 4:55 pm
by Sascha Franck
novaflash wrote:thanks Sascha,
project canceled!


Well, in case you have some settings that are useable for a lot of material without further tweaks, go ahead and sample them. But in case you want to be able to tweak them at least to a certain amount, expect quite some work to come up.

- Sascha

PostPosted: Mon Jul 20, 2009 12:32 am
by chj
VSTadapter wrote:thank you very much!!!
are these better than sir??

Not sure, I haven't tried SIR. Alot of my impulse use is for guitar cabinets, so I need realtime performance. From what I've read SIR can introduce quite a bit of delay. I'm guessing SIR probably sounds better when you render a project though.

PostPosted: Tue Aug 11, 2009 3:36 pm
by MBA
Thanks man great ir links..

PostPosted: Fri Aug 21, 2009 8:21 pm
by mellotron

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

We just launched a large, open IR library at http://www.irlibrary.org (http://www.irlibrary.org)

Make an account and upload any free IR's you have to help make a growing database for users of all convolution reverbs.

Or download to your hearts content

http://www.irlibrary.org (http://www.irlibrary.org)

PostPosted: Sat Aug 22, 2009 1:39 am
by VSTadapter
mellotron this is a great move and a nice idea !
The preview vocals/drums and waveform display is very useful too!!

excellent job! :)
Hope to became a huge IR database soon ;))))

PostPosted: Fri Jun 11, 2010 12:36 pm
by jobromedia
I think it is time to bump this up to the top with my own IR's on the IR library:

http://www.irlibrary.org/index.php?user=jobromedia

PostPosted: Sat Jun 12, 2010 7:18 am
by Sascha Franck
jobromedia wrote:I think it is time to bump this up to the top with my own IR's on the IR library:

http://www.irlibrary.org/index.php?user=jobromedia


Site doesn't load at all for me right now.

- Sascha

PostPosted: Sat Jun 12, 2010 4:20 pm
by Sascha Franck
Site still doesn't work.

PostPosted: Sun Jun 13, 2010 4:48 am
by jobromedia
Well I don't know why it doesn't work. I have no way at all to fix that. :D

PostPosted: Sun Jun 13, 2010 9:06 am
by Ian B
Sascha Franck wrote:
jobromedia wrote:I think it is time to bump this up to the top with my own IR's on the IR library:

http://www.irlibrary.org/index.php?user=jobromedia


Site doesn't load at all for me right now.

- Sascha
Same here :?

PostPosted: Sun Jun 13, 2010 11:02 pm
by satYatunes
VSTadapter wrote:hello my friends!!

please, what is the best free tool to play these free impulses??

thanks you very much :


LiquidSonic's Reverberate LE (free).

PostPosted: Mon Jun 14, 2010 12:52 pm
by liquidsonics
satYatunes wrote:
VSTadapter wrote:hello my friends!!

please, what is the best free tool to play these free impulses??

thanks you very much :


LiquidSonic's Reverberate LE (free).
If you're into true stereo IRs then the full Reverberate makes using true stereo presets with proper routing and consistent IR manipulation across the TS pair very simple, it automatically loads the other pair if they're named in <xyz>l.wav <xyz>r.wav and applies all envelopes and filters to both parts of the pair which is handy for auditioning. I also always try to encourage people to get into true stereo IRs because you get a lot more width and depth from the sound. Using a splash of modulation never hurts either.

PostPosted: Fri Mar 04, 2011 7:53 am
by soulviasound
Another link with free impulse responses made with Bricasti M7 version 2.1

[url]
http://www.soulviasound.com/redd/[/url]

Click on download ir's

PostPosted: Sat Oct 29, 2011 5:24 am
by Cno

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

here are some impulses i made "ontheroad" with my own built mics

http://www.mediafire.com/?j5584hny5azago5 (http://www.mediafire.com/?j5584hny5azago5)

enjoy and let me know whichones you use the most

PostPosted: Sat Oct 29, 2011 5:25 am
by Cno
thanks by the way for all the links

PostPosted: Wed Dec 07, 2011 1:42 pm
by thephase
Hello,

30 NEW FREE MoReVoX IRs (from our libraries Retroverb 3.1 - MSP - Hybrid ) available.

Download now !

www.morevox.com

Cheers
Sab

PostPosted: Wed Dec 07, 2011 2:59 pm
by twisted-space
NM

PostPosted: Sat May 26, 2012 2:41 am
by toitoi
Impulse responses for Space Designer http://ir.j-music.info/
But Reverberate can use them to.

have a nice day/night
8)

PostPosted: Mon Feb 04, 2013 12:02 pm
by sprnva
satYatunes wrote:
VSTadapter wrote:hello my friends!!

please, what is the best free tool to play these free impulses??

thanks you very much :


LiquidSonic's Reverberate LE (free).


Unfortunately for me, that's Windows-only. I'm using LAConvolver right now. Is there a better free OS X plugin I can use?

PostPosted: Mon Feb 04, 2013 1:07 pm
by Morph243
sprnva wrote:Unfortunately for me, that's Windows-only. I'm using LAConvolver right now. Is there a better free OS X plugin I can use?


Not that I know of.
Still, it's a good barebones tool, it just takes longer to setup your reverb channel strip(s).