KVR Audio

EvilDragon · Post by **EvilDragon** » Fri Mar 21, 2014 3:43 pm

Yeah, then it would be Reaper's. A good call would be sticking MIDIOX between Reaper and Pulse and then see what's happening with the clock off vs clock on.

Ingonator · Post by **Ingonator** » Fri Mar 21, 2014 4:05 pm

faun2500 wrote:You mean the reset midi stuff? I have all that unticked from previous bug hunting expeditions! lol

Sending clock syncs stuff to reaper yeah? LFO'S and Arps and that? Really need it to be all synced together. But who's fault is it? Reaper or Pulse? I will have to see if the Slim Phatty's glitching is caused by the clock. If it is, it would be Reapers fault I guess?

Just did another test without being able to replicate the bug.

Some info about my setup:

Pulse 2 OS 1.14 (official version), Windows 7 64-bit, Reaper 4.61 64-bit (latest),
in Reaper sending clock enabled for Pulse 2 (connected via USB), Tickmarks at Reaper MIDI device preferences activated ("On stop/play: Send all-notes off, Reset pitch, Reset CC"). also checked different clock settings in the Pulse 2 Global menu (e.g. auto, external)

UPDATE:
Is it possible that you give/write the status of the entries in the Global menu in your Pulse 2 (e.g. MIDI channel, MIDI Thru, Clock, TX Arp Clock, TX Arp notes, TX parameter)?

Ingo

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 4:31 pm

I will try midi ox now. I can tell you the pulse 2 general in a moment.

EDIT: ignore that.

lalo · Post by **lalo** » Fri Mar 21, 2014 4:33 pm

Hi guys, sorry to bother you...any idea / info on 14 bit MIDI CC? they will come as 1.15 ?
or is'nt the Pulse2 controller chip not able to manage 14 bit MIDI CC for memory limitations and the likes?
thanks
a.

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 4:39 pm

EvilDragon wrote:Yeah, then it would be Reaper's. A good call would be sticking MIDIOX between Reaper and Pulse and then see what's happening with the clock off vs clock on.

How DO I use this thing?

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 5:05 pm

If I set the clock on pulse 2 to internal its ok, Auto & external cause the problem. WIll try with midi din through soundcard now.

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 5:07 pm

TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT
Opened MIDI Input
Opened MIDI Output
0000161D 5 5 90 36 7F 1 F# 3 Note On
00001630 5 5 90 36 00 1 F# 3 Note Off
0000166B 5 5 90 42 7F 1 F# 4 Note On
0000167E 5 5 90 42 00 1 F# 4 Note Off
000016B9 5 5 90 4E 7F 1 F# 5 Note On
000016CC 5 5 90 4E 00 1 F# 5 Note Off
00001707 5 5 90 5A 7F 1 F# 6 Note On
0000171A 5 5 90 5A 00 1 F# 6 Note Off
00001755 5 5 90 36 7F 1 F# 3 Note On
00001769 5 5 90 36 00 1 F# 3 Note Off
000017A3 5 5 90 42 7F 1 F# 4 Note On
000017B7 5 5 90 42 00 1 F# 4 Note Off
000017F1 5 5 90 4E 7F 1 F# 5 Note On
00001805 5 5 90 4E 00 1 F# 5 Note Off
0000183F 5 5 90 5A 7F 1 F# 6 Note On
00001853 5 5 90 5A 00 1 F# 6 Note Off
0000188D 5 5 90 36 7F 1 F# 3 Note On
000018A1 5 5 90 36 00 1 F# 3 Note Off
000018DC 5 5 90 42 7F 1 F# 4 Note On
000018EF 5 5 90 42 00 1 F# 4 Note Off
0000192A 5 5 90 4E 7F 1 F# 5 Note On
0000193D 5 5 90 4E 00 1 F# 5 Note Off
00001978 5 5 90 5A 7F 1 F# 6 Note On
0000198B 5 5 90 5A 00 1 F# 6 Note Off
000019C6 5 5 90 36 7F 1 F# 3 Note On
000019D9 5 5 90 36 00 1 F# 3 Note Off
00001A14 5 5 90 42 7F 1 F# 4 Note On
00001A27 5 5 90 42 00 1 F# 4 Note Off
00001A62 5 5 90 4E 7F 1 F# 5 Note On
00001A76 5 5 90 4E 00 1 F# 5 Note Off
00001AB0 5 5 90 5A 7F 1 F# 6 Note On
00001AC4 5 5 90 5A 00 1 F# 6 Note Off
00001AFE 5 5 90 36 7F 1 F# 3 Note On
00001B13 5 5 90 36 00 1 F# 3 Note Off
00001B4C 5 5 90 42 7F 1 F# 4 Note On
00001B60 5 5 90 42 00 1 F# 4 Note Off
00001B9B 5 5 90 4E 7F 1 F# 5 Note On
00001BAE 5 5 90 4E 00 1 F# 5 Note Off
00001BE9 5 5 90 5A 7F 1 F# 6 Note On
00001BFC 5 5 90 5A 00 1 F# 6 Note Off

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 5:08 pm

That was from Midi OX and is the notes I hear arpeggiated. Does this mean that reaper is SENDING these notes?

EvilDragon · Post by **EvilDragon** » Fri Mar 21, 2014 5:09 pm

There's no way Reaper is sending those notes, I would say those are incoming notes from the Pulse.

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 5:12 pm

When I play this midi part and look at MIDI PORT ACTIVITY in midiox There is NO activity until I select either AUTO or EXT clock on the pulse?

I get activity on the RME fireface 2 which isn't used now. I will check if there is a loop or something involving the rme's midi

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 5:30 pm

1 more thing I am going to try. Sonar. See if the problems happens in that.

Ingonator · Post by **Ingonator** » Fri Mar 21, 2014 5:42 pm

faun2500 wrote:If I set the clock on pulse 2 to internal its ok, Auto & external cause the problem. WIll try with midi din through soundcard now.

For me this setting does not make a difference (= no bug here) but there are some other settings in the pulse 2 global menu (like i mentioned above).

In the Utility menu in the Pulse 2 there is a feature called "Init Global parameters". Maybe you could try that. This will reset all parameters in the Global menu to the default values.

Ingo

faun2500 · Post by **faun2500** » Fri Mar 21, 2014 6:42 pm

Its OK, I have the exact same problem in Live 9 and this coupled with a few other things have made me decide to send the Pulse 2 back. Nevermind. Need a replacement now!

(

Ingonator · Post by **Ingonator** » Fri Mar 21, 2014 6:48 pm

faun2500 wrote:Its OK, I have the exact same problem in Live 9 and this coupled with a few other things have made me decide to send the Pulse 2 back. Nevermind. Need a replacement now! (

As just mentioned by email i had no single case when i could confirm the bug so far. With both Reaper and Live 9 and many different setting both those hosts and in the Pulse 2.

This is frustrating as it is difficult to help when you are not able to reproduce certain bugs like this.

Ingo

EvilDragon · Post by **EvilDragon** » Fri Mar 21, 2014 7:07 pm

Yes, I would also first try a replacement unit before giving completely up.

Waldorf Pulse 2: officially released (OS updated to v1.18)