Diabolique VST
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
This is a 32 bit PC only plugin. If you don´t want it (can´t use it or whatever), please move to the next forum topic of your interest.
This VST plugin is free to celebrate our 20 anniversary. It emulates 2 vintage tube reel to reels: a Revox F36 from 1962 (circuitry 1) and a Tandberg Model 3 from 1958 (circuitry 2). Apart from their differences, here the question is maintenance: while the Revox has been kept in immaculate condition (but retaining all good vintage components), the Tandberg has never seen any maintenance having all its original components (including a tube set of Telefunkens that are all testing as new). It includes some electrical components out of order, needing replacement.
This plugin can be used to warm up your sounds, to simulate tape multi-tracking and/or to dirty up your sounds, it depends on the way it is used.
The original template simulates the Revox and, by switching to Circuitry 2, you get the original Tandberg sound.
Then you have all options open to change the sound: input/output levels, a very rare 15 ips feature was added (not present in the original Tandberg recorder), altering the tube saturation, changing the noise bias and level,... It´s Lo-Fi if you want: you can change the frequency response to the vinyl era by abusing the "Vintage" knob.
There are stereo and mono components.
Full automation, MIDI learn (right-click knobs), zero latency.
Plugin is 32 bit and PC only.
Note: This is an emulation of vintage machinery (with and without maintenance): you shouldn´t expect the beautiful quality of the 90s tape recorders (when they were at the maximum of their development). If that is what you need, you should look elsewhere.
You can hear a Rock piece with Diabolique here
https://www.youtube.com/watch?v=gNexplexlUM
And you can see an overview here:
https://www.youtube.com/watch?v=-4qFtFqSTk8
Have fun, it´s a free plugin!
And have a cracking 2018!
Download here:
http://www.ourafilmes.com/diabolique.htm
Cheers!
This VST plugin is free to celebrate our 20 anniversary. It emulates 2 vintage tube reel to reels: a Revox F36 from 1962 (circuitry 1) and a Tandberg Model 3 from 1958 (circuitry 2). Apart from their differences, here the question is maintenance: while the Revox has been kept in immaculate condition (but retaining all good vintage components), the Tandberg has never seen any maintenance having all its original components (including a tube set of Telefunkens that are all testing as new). It includes some electrical components out of order, needing replacement.
This plugin can be used to warm up your sounds, to simulate tape multi-tracking and/or to dirty up your sounds, it depends on the way it is used.
The original template simulates the Revox and, by switching to Circuitry 2, you get the original Tandberg sound.
Then you have all options open to change the sound: input/output levels, a very rare 15 ips feature was added (not present in the original Tandberg recorder), altering the tube saturation, changing the noise bias and level,... It´s Lo-Fi if you want: you can change the frequency response to the vinyl era by abusing the "Vintage" knob.
There are stereo and mono components.
Full automation, MIDI learn (right-click knobs), zero latency.
Plugin is 32 bit and PC only.
Note: This is an emulation of vintage machinery (with and without maintenance): you shouldn´t expect the beautiful quality of the 90s tape recorders (when they were at the maximum of their development). If that is what you need, you should look elsewhere.
You can hear a Rock piece with Diabolique here
https://www.youtube.com/watch?v=gNexplexlUM
And you can see an overview here:
https://www.youtube.com/watch?v=-4qFtFqSTk8
Have fun, it´s a free plugin!
And have a cracking 2018!
Download here:
http://www.ourafilmes.com/diabolique.htm
Cheers!
-
- KVRist
- 221 posts since 24 Apr, 2004
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
Have fun with it!
Happy 2018!
Happy 2018!
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
Did not receive any notification of your answer...
Thanks.
Here´s a new video promo for this plugin. In it you can see the original reel to reels that were emulated.
https://www.youtube.com/watch?v=ViQLE96ww7A
Thanks.
Here´s a new video promo for this plugin. In it you can see the original reel to reels that were emulated.
https://www.youtube.com/watch?v=ViQLE96ww7A
-
- KVRAF
- 1794 posts since 17 May, 2005
Thanks for the free plugin and congratulations.
I like the sound so far. I tried it on some solo tracks and it does a nice, somewhat dim colored saturation. On a mixbus it didn't really work for me but i'll keep it around thanks. Will have to bridge it if i want to keep using it, but that should work out fine.
I like the sound so far. I tried it on some solo tracks and it does a nice, somewhat dim colored saturation. On a mixbus it didn't really work for me but i'll keep it around thanks. Will have to bridge it if i want to keep using it, but that should work out fine.
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
Thanks for your honest review! Have fun with it!
Cheers!
Cheers!
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
Here´s a video showing all tricks about Diabolique!
https://www.youtube.com/watch?v=X4O0DtwPL9U
https://www.youtube.com/watch?v=X4O0DtwPL9U
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Liking this. Whats the difference between the two versions though ?
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
Do you mean the reel to reels? They were totally different with different tubes (types and brands), power, inputs,... One was made in Norway and the other in Switzerland. Both were super expensive and made to last decades. The Tandberg is a little more noisy and you need an external pre amplifier to be able to record in stereo. The Revox has rca inputs and the Tandberg jacks (you can use it as a guitar amplifier).
You can see some of these things in this thread, in the video before this one I posted today.
Cheers!
You can see some of these things in this thread, in the video before this one I posted today.
Cheers!
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
There is two 'Diabolique' dll's in the zip. One is called 'Diabolique m' and the other just 'Diabolique'.ourafilmes wrote:Do you mean the reel to reels? They were totally different with different tubes (types and brands), power, inputs,... One was made in Norway and the other in Switzerland. Both were super expensive and made to last decades. The Tandberg is a little more noisy and you need an external pre amplifier to be able to record in stereo. The Revox has rca inputs and the Tandberg jacks (you can use it as a guitar amplifier).
You can see some of these things in this thread, in the video before this one I posted today.
Cheers!
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRist
- Topic Starter
- 393 posts since 21 Jul, 2007 from Porto, Portugal
Sorry, I didn´t understand your question.
Those are the mono and stereo components.
M for mono, obviously.
Cheers!
Those are the mono and stereo components.
M for mono, obviously.
Cheers!
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Oh yeah ok thanks.ourafilmes wrote:Sorry, I didn´t understand your question.
Those are the mono and stereo components.
M for mono, obviously.
Cheers!
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp