One Synth Challenge #127: Any One u-he Synth (Carl_saved wins!)

[mclstr]

Love u-he synths so couldn't resist joining to take part in this one.

I only recently discovered that I am a big fan of your music, as you can tell by my "likes" on Soundcloud.

Experimental, original and no attempt at trying to fit in with the current flavor of the month.

[junklight]

Love u-he synths so couldn't resist joining to take part in this one.

I only recently discovered that I am a big fan of your music, as you can tell by my "likes" on Soundcloud.

Experimental, original and no attempt at trying to fit in with the current flavor of the month.

thank you!

[Darksynth FX]

My submission and what inspired me for this track:

The title of my track is taken from a beautiful poem, which touched me deep inside:
http://wondrlust.com/inspiration/footpr ... sand-poem/
It reminds of these moments in life, when you are afraid the worst will happen and often things turn out not to be so bad at all or even the complete opposite of what you feared.

There is also a corresponding scene in the fantastic movie "Yesterday", which I really recommend watching. Short synopsis of the movie:
After an accident, an unsuccessful musician realizes he's the only one on earth who can remember The Beatles.

https://soundcloud.com/darksynth-fx/dar ... n-the-sand

DAW: Ableton Live Suite 10
12x u-he Diva
15x Ableton EQ8
6x Ableton Utility
1x Ableton Compressor
2x Ableton Glue Compressor
2x Voxengo Stereo Touch
1x Flux:: Bitter Sweet
4x Flux:: Stereo Tool
1x Voxengo Tube Amp
1x Tal-Reverb-2
1x Ableton Limiter
1x Ableton Reverb (Send)
1x Ableton Simple Delay (Send)

[Tofu2019]

Okay - I get it. If I don't own any of u-he, I could end up compete with zebralette against a 1400,- euro bundle in the worst case. No, sorry. That setup sounds to awkward...

Cant you use tyrell n6 ?

I have tried Tyrell, but Bitwig 3.0.2 seems to have a problem with it. Settings did not survive a save/load cylce of the project. Putting two tyrells in a layer module got the settings of the instances confused... GUI has to be set to largest mode for each and every single instance. That restrictions simpley does not work for me. And I simply don't have the patience to fiddle with Zebralette again, even more so because working with wave2zebra is now way to restricted by the rulez (It was technically interesting with my "Stukas Attack" piece...).

Podolski ? The unfinished and sonic underworld have some free soundsets for that also

[GeneralQ]

Here is my Submission: https://soundcloud.com/generalq/generalq-tyrell
Im new to KVR. Please guide me if i forgot anything.

Daw: Reaper

U-he Plugins:
Tyrell N6 x39
Protoverb x7

3rd Party Plugins (All Free)
xfer ott x1
ozone imager x1
camel crusher x3 (only for compression)
voxengo span x1
TBProAudio dpMeter2

Reaper Plugins:
ReaDelay x3
ReaEQ x26
JS: Event Horizon Limiter/Clipper x1
JS: RBJ Highpass/Lowpass Filter x1

[doctorbob]

**** Just a quick note to say that I have updated my track ****

I noticed that after some of my small pitch bends on the sax solo part of the track I had not always returned to zero! This meant that some of the solo (1:18 - 2:20) was very slightly out of tune! Maybe 0.5 - 1.0 cents at the most, but I could hear it, and now it's fixed … re-enjoy!

I might still add in a few more choked hats along the way, I need to be a bit more critical about their placing and interactions with the snare/rimsts and crashes! Now I am pretty satisfied about how it sounds overall, just a few little tweaks might push it up to another level - who knows?

dB
https://soundcloud.com/doctorbob/doctor ... cheese-uhe

[Stirner]

Here is my submission
https://soundcloud.com/enfadado-y-hambr ... s-kvr-diva

DAW: Cubase Elements 10
u-he instrument: Diva x30 (approximately)
Cubase Channel Strip
TDR Kotelnikov
TDR Nova
TDR Slick EQ
Limiter Nr 6
Klanghelm MJUCRjr
Best Service - Halls of Fame 3 – Free
Impulse Record - Convology XT
A1Audio A1StereoControl
Voxengo Span

Because you can only have 24 VST tracks in Cubase Elements I had to render tracks to audio. I have all the in-between-backups, but can't easily count how many tracks were really used. There are 11 stems in the final project and each one consists of 2-4 layers, so I think ca. 30 instances of Diva is a good guess.

[zicolafaille]

Hello
Here is my submission
https://soundcloud.com/zicolafaillesoun ... te-a-pitre

Daw : Reason
VSTI insances : 35 Zebra
Extern effects : nothing (except reverb Reason on 3 intruments)

[Taron]

Pressed for time, still, but full of joy having made something like a track again...
https://soundcloud.com/taronium/taron-jovialprobe
I chose TyrellN6, because it's a beauty with secrets I didn't even get the chance to uncover and still it's pure joy to program and play.

TyrellN6 Instances: 21
DAW: MuLab (www.mutools.com)
FX: 2Band EQ, 4Band EQ, Mid-Side Processor, Vintage Echo 2, cross_delay, level compressor
3rd party: Abstract Chamber, WG Doffset, Nova 67p, OTT, LoudMax64, Auburn Sounds Panagement, Dimension Expander, Protoverb

[EnGee]

This is my contribution:

https://soundcloud.com/engeemoon/the-prophet

I used:
Bitwig Studio v3
10 instances of RePro~1
Mostly RePro~1 factory presets without tweaking.
RePro~1 effects
Bitwig Studio peak limiter

[Taron]

Oh, how I wished I would have to brace myself now! ...but let me start a topic which makes people write quickly enough posts so the forum will bring me to a next page for the sake of my stomach...

Hey, Rob, I'm amazed by your sax, that's awesome! Some most excellent moments in there. Recently you've really come to accept your musical preferences and inclinations, which leads to plenty of authentic tracks. That's really impressive!

[Carl_saved]

Hi all,

my submission this month:

https://soundcloud.com/carl_saved/carl_ ... zebralette

Zebralette was a lot of fun to work with. It sounds so clean, and has amazingly low CPU usage - no freezing necessary this month! What I missed most were a VA style filter, and some way of FM or ring modulation to get anharmonic tones, and distortion. I guess I'd have to go and get a grown-up Zebra to get that

Looking forward to an epic listening experience


DAW: Ableton Live 10.1
Zebralette: 53x

Ableton Live's Audio FX:
Compressor: 37 (35 of which for sidechaining)
EQ Eight: 32
Reverb: 18
Delay: 14
Utility: 10
Multiband Dynamics: 5
Limiter: 3
Glue Compressor: 2

Ableton Live's MIDI FX:
Chord (on some percs)
Pitch
Velocity

Metering:
Youlean Loudness Meter
JScope
Voxengo SPAN

Cheers!

[exponent1]

Hey Everyone!
Here's my submission for KVR OSC #127 using Zebralette. I hope you enjoy my exploration this month

https://soundcloud.com/theexponent/jinglepop

DAW:Reaper
Zebralette : ~45 instances
Native DAW FX: ReaComp, JS: MDA Pseudo Stereo, ReaEQ, ReaControlMIDI, MIDI Pitch Wheel LFO, Ping Pong Pan, ReaXComp, ReaGate
3rd Party FX: Cocoa Delay, Dragonfly Room/Hall Reverb, OTT, Wider, Rescue, BootEQ, GClip, Bass Professor Mk2, DD Tremolo, Panagement 2, DD Reverb, Leveling Tool, LoudMax, W1 Limiter
Mastering: JS: DC Filter, TDR Nova, Rescue, TDR Kotelnikov, GClip, LoudMax
Metering: SPAN, Youlean Loudness Meter 2

[Hanz Meyzer]

Wow, this is impressive! You guys really newly set the boundaries of what is possible using a single U-He synth. I was too lazy again

[Impedance Music]

Hi,

so here is my submission this time. I used 35 instances of Tyrell N6 and created every sound by scratch - as always no presets used. I hope i did a more decent job on the mix and mastering this time - i listened to my last submission on different headphones - it was.. it was terrible XD
It´s also the first time i used a reference track to get the sound right - i didn´t - but maybe it´s better this time. Hope you can enjoy it at least a little bit

https://soundcloud.com/impedancemusic/i ... -tyrell-n6

Tyrell N6 - 35 instances

VST Effects:
Fruity EQ1 and EQ2, TDR Nova, Fruity Convolver, TAL Reverb II, Fruity Multibandcompressor, Fruity Stereo Enhancer, Fruity Delay 2, Fruity PanOMatic