A new updated version of Eventide Omnipressor has just been released.

VST, AU, etc. plug-in Virtual Effects discussion
escalona
KVRian
641 posts since 16 Jan, 2018 from Portland, OR USA

Post Mon Oct 07, 2019 5:35 pm

Aloysius wrote:
Mon Oct 07, 2019 2:18 pm
A new updated version of Eventide Omnipressor has just been released.
Lol :clap: :party: :hihi: :tu:
Presonus StudioOne 4.5 Pro i9-9900k Win10 Pro / Kemper Profiler / Bunch of old gear

User avatar
e@rs
KVRAF
4404 posts since 15 Dec, 2011 from Bucharest, Romania

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 12:17 am

bmanic wrote:
Tue Sep 24, 2019 8:21 pm
Anyhow, is there a place where I can get the installer for the previous version? The new version overwrites the old one and to my ears it sounds quite different. This is unfortunate. I'd like to have both versions side by side and for backwards compatibility.
+1. I'd like to have the previous installer too. My impression is that the new version sounds less dirty; could it be that the new GUI fools my brain and stuff?

electro
KVRAF
4586 posts since 6 May, 2002

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 4:35 am

mkII Eventide effects are some of the best Native options.

What were the improvements over the mkI Omnipressor?
Intel Core2 Quad CPU + 4 GIG RAM

User avatar
Aloysius
KVRAF
26084 posts since 11 Aug, 2008 from another dimension

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 5:50 am

This new update adds a Mix control and Input/Output Gain knobs.
Hi-de-Hi!

User avatar
sqigls
KVRAF
4121 posts since 25 Dec, 2004 from Melbourne, Australia

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 6:06 am

i hope the phaser gets a mix knob too

User avatar
Calenberger
KVRian
581 posts since 8 Sep, 2019 from Calenberg

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 8:25 am

sqigls wrote:
Tue Oct 08, 2019 6:06 am
i hope the phaser gets a mix knob too
In its manual on page 4:

Depth Is Mix!

Many modulation type effects provide a mix control. In fact, it is impossible to achieve most modulation-type effects without a mix control. By definition these effects are created by combining the dry input signal with some affected signal. This signal is usually phase shifted by means of a phase shift network, or time delayed by a digital delay line or bucket brigade device. The Instant Phaser has a mix knob, but rather than being labeled Mix, it is called Depth. At 0% the output is entirely the phase shifted signal, so you will hear a slight detuning effect. At 100% it is an even mix of the dry and wet signal for full phasing effect.

Why is it called Depth, you ask? As you add more of the dry signal to the delayed signal nulls appear in the output spectrum. These nulls get deeper as the two signals approach equal amplitude. Hence you are controlling the depth of the nulls!


And there are Sends in every (serious) DAW...
Lorem ipsum dolor sit amet, kanntu meine musi hoeren da:
https://sonoryth.bandcamp.com/
Signature Sound

jens
KVRAF
19802 posts since 12 Jul, 2003 from West Caprazumia

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 8:33 am

e@rs wrote:
Tue Oct 08, 2019 12:17 am
bmanic wrote:
Tue Sep 24, 2019 8:21 pm
Anyhow, is there a place where I can get the installer for the previous version? The new version overwrites the old one and to my ears it sounds quite different. This is unfortunate. I'd like to have both versions side by side and for backwards compatibility.
+1. I'd like to have the previous installer too. My impression is that the new version sounds less dirty; could it be that the new GUI fools my brain and stuff?
The .dll alone should suffice. I still have the old one... just not sure if I am allowed to share it.

User avatar
sqigls
KVRAF
4121 posts since 25 Dec, 2004 from Melbourne, Australia

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 8:41 am

yeah but it's not the same as a mix knob.
Calenberger wrote:
Tue Oct 08, 2019 8:25 am
sqigls wrote:
Tue Oct 08, 2019 6:06 am
i hope the phaser gets a mix knob too
In its manual on page 4:

Depth Is Mix!

Many modulation type effects provide a mix control. In fact, it is impossible to achieve most modulation-type effects without a mix control. By definition these effects are created by combining the dry input signal with some affected signal. This signal is usually phase shifted by means of a phase shift network, or time delayed by a digital delay line or bucket brigade device. The Instant Phaser has a mix knob, but rather than being labeled Mix, it is called Depth. At 0% the output is entirely the phase shifted signal, so you will hear a slight detuning effect. At 100% it is an even mix of the dry and wet signal for full phasing effect.

Why is it called Depth, you ask? As you add more of the dry signal to the delayed signal nulls appear in the output spectrum. These nulls get deeper as the two signals approach equal amplitude. Hence you are controlling the depth of the nulls!


And there are Sends in every (serious) DAW...

User avatar
Calenberger
KVRian
581 posts since 8 Sep, 2019 from Calenberg

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 8:51 am

sqigls wrote:
Tue Oct 08, 2019 8:41 am
yeah but it's not the same as a mix knob.
Calenberger wrote:
Tue Oct 08, 2019 8:25 am
sqigls wrote:
Tue Oct 08, 2019 6:06 am
i hope the phaser gets a mix knob too
In its manual on page 4:

Depth Is Mix!

Many modulation type effects provide a mix control. In fact, it is impossible to achieve most modulation-type effects without a mix control. By definition these effects are created by combining the dry input signal with some affected signal. This signal is usually phase shifted by means of a phase shift network, or time delayed by a digital delay line or bucket brigade device. The Instant Phaser has a mix knob, but rather than being labeled Mix, it is called Depth. At 0% the output is entirely the phase shifted signal, so you will hear a slight detuning effect. At 100% it is an even mix of the dry and wet signal for full phasing effect.

Why is it called Depth, you ask? As you add more of the dry signal to the delayed signal nulls appear in the output spectrum. These nulls get deeper as the two signals approach equal amplitude. Hence you are controlling the depth of the nulls!


And there are Sends in every (serious) DAW...
Okay, nothing gives better feelings than a big knob :D
Agreed! :oops:
Lorem ipsum dolor sit amet, kanntu meine musi hoeren da:
https://sonoryth.bandcamp.com/
Signature Sound

User avatar
e@rs
KVRAF
4404 posts since 15 Dec, 2011 from Bucharest, Romania

Re: A new updated version of Eventide Omnipressor has just been released.

Post Tue Oct 08, 2019 10:44 am

jens wrote:
Tue Oct 08, 2019 8:33 am
e@rs wrote:
Tue Oct 08, 2019 12:17 am
bmanic wrote:
Tue Sep 24, 2019 8:21 pm
Anyhow, is there a place where I can get the installer for the previous version? The new version overwrites the old one and to my ears it sounds quite different. This is unfortunate. I'd like to have both versions side by side and for backwards compatibility.
+1. I'd like to have the previous installer too. My impression is that the new version sounds less dirty; could it be that the new GUI fools my brain and stuff?
The .dll alone should suffice. I still have the old one... just not sure if I am allowed to share it.
Thanx, jens! :hug:

But first I'll ask Eventide if they can provide the previous version installer.

SteveWZ
KVRian
995 posts since 26 Feb, 2016

Re: A new updated version of Eventide Omnipressor has just been released.

Post Wed Oct 09, 2019 10:18 am

Both the Eventide Omnipressor and SP2016 plugins capture the characteristics of the original hardware very well.

Both still sound excellent.

Infinite5ths
KVRist
322 posts since 19 Sep, 2005 from Los Angeles, CA

Re: A new updated version of Eventide Omnipressor has just been released.

Post Fri Oct 25, 2019 2:47 pm

Bought a 2nd-hand license from a fellow KVR'ist in the Sell & Buy forum:

Definitely glad I did - many thanks to the helpful posters in this thread who brought it to my attention. I've been discovering a lot of the Eventide plugins this month. :phones: Not sure how they slipped under my radar (except for Blackhole) for so long... :o

User avatar
Saw
KVRist
217 posts since 20 Sep, 2006

Re: A new updated version of Eventide Omnipressor has just been released.

Post Fri Feb 14, 2020 8:29 am

Great discount again now...
To buy or not to buy?
Any opinions, btw?

User avatar
Orville71
KVRist
45 posts since 6 Aug, 2019

Re: A new updated version of Eventide Omnipressor has just been released.

Post Fri Feb 14, 2020 8:36 am

Saw wrote:
Fri Feb 14, 2020 8:29 am
Great discount again now...
To buy or not to buy?
Any opinions, btw?
We offer a 30-day fully-functional demo so feel free to try before you buy.

escalona
KVRian
641 posts since 16 Jan, 2018 from Portland, OR USA

Re: A new updated version of Eventide Omnipressor has just been released.

Post Fri Feb 14, 2020 3:54 pm

Saw wrote:
Fri Feb 14, 2020 8:29 am
Great discount again now...
To buy or not to buy?
Any opinions, btw?
I know there are more compressors out there than bad politicians. This one is not your usual compressor at all. I'd give it a try. You won't find another one like this one.
Presonus StudioOne 4.5 Pro i9-9900k Win10 Pro / Kemper Profiler / Bunch of old gear

Return to “Effects”