Aurora DSP - Mammoth Bass Plugin
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
Aurora DSP is a new startup in the audio software industry. We set out to create a bass plugin with excellent sound, capable of achieving more than satisfying effects in a blink of an eye.
That's how Mammoth came to life - an advanced bass guitar processor.
Mammoth is based on separating the signal into two independent signal tracks with variable crossover frequency.
The first signal track lets you chose the right preamp, distortion, guitar cabinet and tonal balance - enabling you to achieve a wide spectrum of tones to suit your vision.
The second track enables you to make the most out of the low end, with a special maximizer and a low-frequency saturator, all of which enables you to transform even the most delicate instrument into a bass powerhouse.
Preorder Mammoth for a special price of $29 ($50 off) directly on our site www.auroradsp.com
https://youtu.be/uQ3qyAyrouE
https://youtu.be/vIKLaN_i5fI
That's how Mammoth came to life - an advanced bass guitar processor.
Mammoth is based on separating the signal into two independent signal tracks with variable crossover frequency.
The first signal track lets you chose the right preamp, distortion, guitar cabinet and tonal balance - enabling you to achieve a wide spectrum of tones to suit your vision.
The second track enables you to make the most out of the low end, with a special maximizer and a low-frequency saturator, all of which enables you to transform even the most delicate instrument into a bass powerhouse.
Preorder Mammoth for a special price of $29 ($50 off) directly on our site www.auroradsp.com
https://youtu.be/uQ3qyAyrouE
https://youtu.be/vIKLaN_i5fI
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
Definitely not legend, but yes it was my band.
- KVRAF
- 2269 posts since 10 Jul, 2008 from Orbit NE US
Seems like what i used to do with my rig ( inspired by Squire, Collins, and Lesh)
But i split the channels by pickup first. Neck pickup in EQ, preamp, compressor 8 sec delay, and off to the massive stacks ( 2x15’, 2x15”, single front loaded 18”, long throw 18” sub. The bridge pickup off to piles of FX too numerous to mention, then EQ, 8then 4x12”, 2x12”, single 12”, single 10”. 8 sec delay. Lotsa fun pushing that much air and having the flexibility.
But i split the channels by pickup first. Neck pickup in EQ, preamp, compressor 8 sec delay, and off to the massive stacks ( 2x15’, 2x15”, single front loaded 18”, long throw 18” sub. The bridge pickup off to piles of FX too numerous to mention, then EQ, 8then 4x12”, 2x12”, single 12”, single 10”. 8 sec delay. Lotsa fun pushing that much air and having the flexibility.
gadgets an gizmos..make noise https://soundcloud.com/crystalawareness Restocked: 3/24
old stuff http://ww.dancingbearaudioresearch.com/
if this post is edited -it was for punctuation, grammar, or to make it coherent (or make me seem coherent).
old stuff http://ww.dancingbearaudioresearch.com/
if this post is edited -it was for punctuation, grammar, or to make it coherent (or make me seem coherent).
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
More or less same approach. In lower section of Mammoth you can choose on which frequency you want to split the signal. Beside that, we add a bass maximizer and saturator for tighten up the low end.CrystalWizard wrote: ↑Fri Feb 28, 2020 6:42 am Seems like what i used to do with my rig ( inspired by Squire, Collins, and Lesh)
But i split the channels by pickup first. Neck pickup in EQ, preamp, compressor 8 sec delay, and off to the massive stacks ( 2x15’, 2x15”, single front loaded 18”, long throw 18” sub. The bridge pickup off to piles of FX too numerous to mention, then EQ, 8then 4x12”, 2x12”, single 12”, single 10”. 8 sec delay. Lotsa fun pushing that much air and having the flexibility.
-
- KVRian
- 1086 posts since 17 Jun, 2012
Cool. Thanks for the response. Definitely worth checking out. Your music is great!
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
Good news, we're almost on finish line. For that special occasion we made a video presentation of 3 channels available in Mammoth.
https://youtu.be/smvbrQH5vKY
https://youtu.be/smvbrQH5vKY
- KVRAF
- 2269 posts since 10 Jul, 2008 from Orbit NE US
I shall check it out, sounds cool.Daniel_Witczak wrote: ↑Fri Feb 28, 2020 9:07 amMore or less same approach. In lower section of Mammoth you can choose on which frequency you want to split the signal. Beside that, we add a bass maximizer and saturator for tighten up the low end.CrystalWizard wrote: ↑Fri Feb 28, 2020 6:42 am Seems like what i used to do with my rig ( inspired by Squire, Collins, and Lesh)
But i split the channels by pickup first. Neck pickup in EQ...
Wish i still had the stacks...
And, no, an amp sim is not gonna move all that air.
gadgets an gizmos..make noise https://soundcloud.com/crystalawareness Restocked: 3/24
old stuff http://ww.dancingbearaudioresearch.com/
if this post is edited -it was for punctuation, grammar, or to make it coherent (or make me seem coherent).
old stuff http://ww.dancingbearaudioresearch.com/
if this post is edited -it was for punctuation, grammar, or to make it coherent (or make me seem coherent).
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
I think two nice 18inch woofers with powerful d class amp and laptop will do the job. But i know what do you mean by that. I'm bassist as well.
-
- Banned
- 2 posts since 1 Mar, 2020
This sounds litty
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
Thanks!
You can support us by 150 USD (600pln) pledge on polish crowdfunding campaign and getting perpetual license for every plugin we will ever made.
At least 3 outstanding plugins will be released this year.
Here is a direct link
https://zrzutka.pl/rtwe6a/wplac/uhhbjp
-
Daniel_Witczak Daniel_Witczak https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=452874
- KVRer
- Topic Starter
- 8 posts since 11 Dec, 2019
Trial is available! https://auroradsp.com/plugins/37-mammot ... lugin.html