KVR Audio

vastdynamics · Post by **vastdynamics** » Fri Mar 13, 2020 5:53 pm

https://www.kvraudio.com/news/vast-dyna ... zer2-47997

We are proud to announce that the final release version 3.0.0 of Vaporizer2 is out now.

The following features were added:

• Audio out oscilloscope display
• Snap to zero crossings mode in wavetable editor
• Major performance improvements in wavetable editor
• Hotkey to toggle draw mode in wavetable editor (Shift + d)
• UI improvements, maximize buttons for editor sections
• Significantly improved MSEG envelopes, can now be synchronized with DAW timecode – also for loops, option to run MSEG in single mode
• Added two new random drift automation sources
• Significantly improved filter section (sound and CPU consumption)
• Added wavetable modulation function CONVOLUTION, TIME > FREQUENCY and FREQUENCY > TIME
• Significantly improved modulation system
• General setting of wavetable frequency characteristics: sharp (ideal filtering), soft (butterworth filtering), dull (linear) – saved to settings file
• Fixed sampler normalization issue
• Fixed MSEG to wavetable functions
• Factory presets now including 370 quality presets, wavetables and single cycles now including 780 wavetables

Find it here: https://www.vast-dynamics.com/?q=products https://www.facebook.com/vastdynamics/

mike_o · Post by **mike_o** » Fri Mar 13, 2020 8:16 pm

I have an issue with the way that the snap to zero works with phase alignment.

It snaps to a zero crossing but it stretches the waveform rather than shifting it.

with snap enabled moving the phase knob should shift the waveform from side to side without stretching it while realigning the phase, and freq should stretch the wave to the next zero crossing.

The way that phase works is just not quite right to me.

deejay2 · Post by **deejay2** » Sat Mar 14, 2020 11:59 am

thanks so update appreciate, i believe update is free for existing users right?

vastdynamics · Post by **vastdynamics** » Sat Mar 14, 2020 12:08 pm

deejay2 wrote: ↑Sat Mar 14, 2020 11:59 am thanks so update appreciate, i believe update is free for existing users right?

Of course. Life long free update policy.

WasteLand · Post by **WasteLand** » Wed Apr 08, 2020 8:10 am

vastdynamics wrote: ↑Fri Mar 13, 2020 5:49 pm The long awaited updated version 3.0 (March 13th 2020) of the Vaporizer2 User's Manual is available and can be downloaded here.
https://www.vast-dynamics.com/?q=VaporizerUserManual

there is a new version, mainly bug fixes. in my preferences i have other paths to all (presets, wavetables, etc.) but the installer installs all it's factory stuff, still in another place, the default.
this is not the way, me thinks.

and still the icon for the standalone version...

but still, great synth.

vastdynamics · Post by **vastdynamics** » Wed Apr 08, 2020 9:48 am

Yes, the install paths should be remembered for the update. I will look into that. And the icon will be fixed asap. You are on Windows right?

WasteLand · Post by **WasteLand** » Wed Apr 08, 2020 9:57 am

vastdynamics wrote: ↑Wed Apr 08, 2020 9:48 am Yes, the install paths should be remembered for the update. I will look into that. And the icon will be fixed asap. You are on Windows right?

yes windows (10, 1909). thanks! i can do it manually, but most installers check the paths. it is more easy. and when you forget it...
the icon is a small thing, but it is ugly (it is the default icon of win.., of course you can choose your own), and it states the older the version.

small things, but for better experience. thanks!

rj0 · Post by **rj0** » Wed Apr 08, 2020 11:43 pm

Not sure whether I am just overlooking something, but, when modifying a partial or its phase, is there any feedback as to which partial (e.g. 167th) is being edited (and/or the value result of the edit)?

vastdynamics · Post by **vastdynamics** » Thu Apr 09, 2020 7:08 am

Good point. In the next version I will include this information in the context menu of the frequency domain editor along with an option to manually enter magnitude and phase of a bin.

rj0 · Post by **rj0** » Thu Apr 09, 2020 9:04 pm

vastdynamics wrote: ↑Thu Apr 09, 2020 7:08 am Good point. In the next version I will include this information in the context menu of the frequency domain editor along with an option to manually enter magnitude and phase of a bin.

So will this be a RMB (right mouse button) display (RMB click on partial)?

In any case, sounds good (and needed, easy to lose track after scrolling to higher partials)!

Thanks!

vastdynamics · Post by **vastdynamics** » Sat Apr 11, 2020 5:31 pm

Nice updates are here: Vaporizer2 3.0.2 (April 11th 2020):

• Great UI loading and graphics performance improvements
• Fix: Issue with velocity modulation source, phaser FX sync intervals and oscilloscope display corrections, standalone icon
• Option to type in magnitude and phase of partial / harmonics bin in frequency mode editor (context menu)
• Store preset browser sort preferences in settings file and added clear search filter button
• Factory presets now including 392 quality presets, wavetables and single cycles now including 780 wavetables

https://www.vast-dynamics.com/?q=products
https://www.facebook.com/vastdynamics/

WasteLand · Post by **WasteLand** » Mon Apr 13, 2020 2:01 pm

vastdynamics wrote: ↑Sat Apr 11, 2020 5:31 pm Nice updates are here: Vaporizer2 3.0.2 (April 11th 2020):

• Great UI loading and graphics performance improvements
• Fix: Issue with velocity modulation source, phaser FX sync intervals and oscilloscope display corrections, standalone icon
• Option to type in magnitude and phase of partial / harmonics bin in frequency mode editor (context menu)
• Store preset browser sort preferences in settings file and added clear search filter button
• Factory presets now including 392 quality presets, wavetables and single cycles now including 780 wavetables

https://www.vast-dynamics.com/?q=products
https://www.facebook.com/vastdynamics/

it now resets the preset folders to default, when installing. so i can refer them to the locations on my the drive where they normally are. but after the next update will it remember the preset folders.

EDIT: this wrong, i was on my laptop. i didn't make other paths to presets etc. on my laptop....
confusing two "studio's"..... (one is the real, i.e. with all the controllers, screens, monitor, etc..)

and perhaps, can you make subfolders, didn't try it, to find my own presets quickly, i use my artist's name now, works. didn't try it yet, shall try it.

but great update, and still love the program!

rj0 · Post by **rj0** » Mon Apr 13, 2020 11:13 pm

vastdynamics wrote: ↑Thu Apr 09, 2020 7:08 am Good point. In the next version I will include this information in the context menu of the frequency domain editor along with an option to manually enter magnitude and phase of a bin.

It's there.

Many thanks for adding!

mike_o · Post by **mike_o** » Sat May 09, 2020 5:37 am

I found a bug in single cycle wave export,

I bought vaporizer predominately for the wavetable editor/creator to use for my reaktor projects, this issue is a big one to me.

I dropped this waveform into vaporizer...

Oddsaws 1 Original.png

I made a small edit simply smoothing out a section of the wave and then exported a new file.

It came out like this...

Oddsaws 1 Export.png

you can see that there is a glitch at the end of the wave, I opened it in audacity and it's exactly 4 samples of dead space at the end that shouldn't be there.

please get this fixed, thanks.

vastdynamics · Post by **vastdynamics** » Sat May 09, 2020 4:39 pm

mike_o wrote: ↑Sat May 09, 2020 5:37 am I found a bug in single cycle wave export,

Thanks for detecting this and bringing it up. The issue will be fixed with the upcoming version 3.0.3.

LAUNCH! VAST Dynamics - Vaporizer2 - Hybrid Wavetable Additive / Subtractive Synthesizer / Sampler / Workstation