Atlantis Rocks
-
- KVRian
- 545 posts since 14 Jul, 2003 from Germany, Berlin
I have problems with 0.9c too: Somehow the delay unit may be broken. Regardless what parameter settings I choose, I get a 'bitcrushed' sound. I double-checked, whether the delay filter or chorus is enabled, but it isn't. Can anybody confirm?
*Edit*: B.t.w. with the AtlantisFilter the issue is there as well.
I'm using Cantabile 1.2 or Fl Studio 7 @ 44.1 Khz / 16bit. I also tried on a different machine - same issue.
*Edit*: B.t.w. with the AtlantisFilter the issue is there as well.
I'm using Cantabile 1.2 or Fl Studio 7 @ 44.1 Khz / 16bit. I also tried on a different machine - same issue.
Last edited by Vibro Larynx on Thu May 17, 2007 8:39 pm, edited 1 time in total.
snooky wrote: There is no god in the VST world.
- KVRist
- 484 posts since 8 Dec, 2004 from Belgrade
same issue here...
-
- KVRAF
- 2901 posts since 26 Jul, 2005 from dun unda
Jeremy's sent me an email and I've also mentioned that problem on the message.
Hopefully he will fix that in the next version.
Hopefully he will fix that in the next version.
-
- KVRer
- 27 posts since 26 Apr, 2007 from Vancouver, BC, Canada
I've put a new build up on http://jeremyevers.com that fixes the delay issues that you guys are having with 0.9c... Thanks!
-
- KVRAF
- 1942 posts since 22 Mar, 2002 from Timisoara, Romania
-
- KVRAF
- 2901 posts since 26 Jul, 2005 from dun unda
If in v1.0 if that ever gets around, here are some suggestions:
---Folder set for "chips" in config (when waveform is set to pick from user database)
---Folder set for "MIDI control" folder in config. (I saw it appear from time to time)
---Saving of config settings to registry or a config file. (Always reset on new instance it appears.)
---Preset Browser (if possible, not important)
---Is it possible to use custom waves for LFO already? (didn't have the liberty to check)
---Exporting settings from the Filter unit from the synth.
---Importing Filter unit settings to the synth.
EDIT: I managed to get pitch bending to work, however the bending mechanism is a bit too approximate. When adjusting the modulation range for tuning/octave on the oscillator, it's hard to tell what's an octave cause it seems to go beyond that, but not in perfect tune. If on the transposer, it's fine, though the range is limited to 12 semitones.
Dunno what to suggest here. Maybe the others could advise on this.
EDIT2: Is it supposed to detune to -1 when the transpose slider is set at 0 when the modulation range is inverted/reversed? (ONLY happens when set to BEND) It's also a bit difficult to get +/-2 pitch bending range. (I keep on getting like, +2, -3 as a pitch bend range)
EDIT3: Using transpose as a pitch bending mechanism is fixed to semitones. Is there any way for smooth pitch bending?
---Folder set for "chips" in config (when waveform is set to pick from user database)
---Folder set for "MIDI control" folder in config. (I saw it appear from time to time)
---Saving of config settings to registry or a config file. (Always reset on new instance it appears.)
---Preset Browser (if possible, not important)
---Is it possible to use custom waves for LFO already? (didn't have the liberty to check)
---Exporting settings from the Filter unit from the synth.
---Importing Filter unit settings to the synth.
EDIT: I managed to get pitch bending to work, however the bending mechanism is a bit too approximate. When adjusting the modulation range for tuning/octave on the oscillator, it's hard to tell what's an octave cause it seems to go beyond that, but not in perfect tune. If on the transposer, it's fine, though the range is limited to 12 semitones.
Dunno what to suggest here. Maybe the others could advise on this.
EDIT2: Is it supposed to detune to -1 when the transpose slider is set at 0 when the modulation range is inverted/reversed? (ONLY happens when set to BEND) It's also a bit difficult to get +/-2 pitch bending range. (I keep on getting like, +2, -3 as a pitch bend range)
EDIT3: Using transpose as a pitch bending mechanism is fixed to semitones. Is there any way for smooth pitch bending?
-
- KVRAF
- 2901 posts since 26 Jul, 2005 from dun unda
The Atlantis Supersaw (MP3 live testing)
http://rapidshare.com/files/32160963/19 ... s.zip.html (the above preset is the newest one there. I was having a go at getting the preset to function as if it was a keyboard preset. This is what I got.
c2 controls the modwheel transition from l2 to e1. Upon loading, for some reason Atlantis has modwheel value on 64. Is it possible if upon preset load, anything that uses midi 1, be set to lowest value rather than the middle value?
I managed to get a relatively in-tune pitch bending (at +/-2 semitones, can't get a smooth octave.), velocity on LPCut.
You guys can use it as a template for making any other presets that you want to have bending or modulation, though you may have to watch for some of the stuff there. Out of anything, the manual hasn't had an opener from me. :\
Enjoy guys.
http://rapidshare.com/files/32163203/Sy ... e.ats.html (sfx, a machine)
http://rapidshare.com/files/32163170/To ... s.ats.html (bassish)
Two more semirandoms.
Recommended Patches: Tiger Roar, Tough Ends, The Atlantis Supersaw, Simple Pad 2, 60s Electric Piano, Fake Orchestra, Swellowa Synth (both), FM Pulsation, Goddamned Cat, FM Horn, FM Amps, Vintage Flange Synth
http://rapidshare.com/files/32160963/19 ... s.zip.html (the above preset is the newest one there. I was having a go at getting the preset to function as if it was a keyboard preset. This is what I got.
c2 controls the modwheel transition from l2 to e1. Upon loading, for some reason Atlantis has modwheel value on 64. Is it possible if upon preset load, anything that uses midi 1, be set to lowest value rather than the middle value?
I managed to get a relatively in-tune pitch bending (at +/-2 semitones, can't get a smooth octave.), velocity on LPCut.
You guys can use it as a template for making any other presets that you want to have bending or modulation, though you may have to watch for some of the stuff there. Out of anything, the manual hasn't had an opener from me. :\
Enjoy guys.
http://rapidshare.com/files/32163203/Sy ... e.ats.html (sfx, a machine)
http://rapidshare.com/files/32163170/To ... s.ats.html (bassish)
Two more semirandoms.
Recommended Patches: Tiger Roar, Tough Ends, The Atlantis Supersaw, Simple Pad 2, 60s Electric Piano, Fake Orchestra, Swellowa Synth (both), FM Pulsation, Goddamned Cat, FM Horn, FM Amps, Vintage Flange Synth
-
- KVRAF
- 6828 posts since 28 Apr, 2004 from france
MaliceX, your presets are great. Thanks for sharing.
Is there any presets for the vst efx ?
Is there any presets for the vst efx ?
-
- KVRAF
- 2901 posts since 26 Jul, 2005 from dun unda
Yeah, though I'd rather just use the random generator, it's pretty easy to make some usable effects out of.
Thanks.
Just wondering, is Atlantis still undergoing any changes or stuff? I really don't like how the Importing and chips are handled. (One should be able to select a folder in the config). Then there's the wondering of how to transfer the effect parameters from the synth unit to the effect plugin.
Thanks.
Just wondering, is Atlantis still undergoing any changes or stuff? I really don't like how the Importing and chips are handled. (One should be able to select a folder in the config). Then there's the wondering of how to transfer the effect parameters from the synth unit to the effect plugin.
- KVRAF
- 2540 posts since 18 May, 2002 from up on Cripple Creek (CO)
Been playing with this synth (& the fx version) a lot lately, and I must say I love it! Thanks for this.
-
- KVRAF
- Topic Starter
- 5341 posts since 8 Aug, 2003 from Berlin Germany
- KVRAF
- 8406 posts since 2 Aug, 2005 from Guitar Land, USA
I love this synth! The octaver is great, I like the glitches.
The chips sound cool, I just figured out how to import, then restart it and there they were.
The chips sound cool, I just figured out how to import, then restart it and there they were.
The only site for experimental amp sim freeware & MIDI FX: http://runbeerrun.blogspot.com
https://m.youtube.com/channel/UCprNcvVH6aPTehLv8J5xokA -Youtube jams
https://m.youtube.com/channel/UCprNcvVH6aPTehLv8J5xokA -Youtube jams
-
- KVRian
- 886 posts since 2 Jun, 2005 from Hawaii
-
- KVRAF
- 2901 posts since 26 Jul, 2005 from dun unda
Yeah, for what it does it's a bit goofy at the moment. Particularly if you want to use modwheel for stuff like vibrato.
When I finish my z3ta+ GM bank, I'll probably have a shot at creating some usable instruments from scratch using this thing. Very flexible.
When I finish my z3ta+ GM bank, I'll probably have a shot at creating some usable instruments from scratch using this thing. Very flexible.