Twin Engined Verb - in CMMag, Feb 2011
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
Soooo often with delay effects, I find myself reaching for a reverb to make things a little softer ... and with reverb effects, I generally find myself with a less than flexible pre-echo.
Twin Engined Verb (TEV) is my take on solving this conundrum and provides two independent echo and reverb sections with crossover, enhancer and m/s capabilities.
Oh, and its a full-on distortion-cum-noise-box too
hope y'all like and use it ... use this thread for questions / suggestions / feedback / hints & tips / etc
cheers
daz
Twin Engined Verb (TEV) is my take on solving this conundrum and provides two independent echo and reverb sections with crossover, enhancer and m/s capabilities.
Oh, and its a full-on distortion-cum-noise-box too
hope y'all like and use it ... use this thread for questions / suggestions / feedback / hints & tips / etc
cheers
daz
Last edited by daz.diamond on Fri Feb 04, 2011 5:00 pm, edited 2 times in total.
whiteLABEL - now set free : whiteLABEL ||
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
download updates :
1.0.1.9 - minor gui-glitch fixed
1.0.1.8 - stereo effect rather than multi-channel = for use in FL
- presets now saved individually
1.0.1.7 - saving upto 8% cpu compared to (1.0.1.6) depending on load
1.0.1.6 - DC'09 revised deadline : plenty tweaks
1.0 - DC'09 deadline
note : to install a newer version of TEV, you'll need to remove the previous version so as to "flush" your system and the host gets to see the new version as if for the first time. See later in this thread for Cubase not recognising newer version ...
1.0.1.9 - minor gui-glitch fixed
1.0.1.8 - stereo effect rather than multi-channel = for use in FL
- presets now saved individually
1.0.1.7 - saving upto 8% cpu compared to (1.0.1.6) depending on load
1.0.1.6 - DC'09 revised deadline : plenty tweaks
1.0 - DC'09 deadline
note : to install a newer version of TEV, you'll need to remove the previous version so as to "flush" your system and the host gets to see the new version as if for the first time. See later in this thread for Cubase not recognising newer version ...
Last edited by daz.diamond on Sun Nov 01, 2009 10:30 pm, edited 4 times in total.
whiteLABEL - now set free : whiteLABEL ||
-
Download SOphist Download SOphist https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=95874
- KVRAF
- 4098 posts since 26 Jan, 2006 from :noitacoL
well, thanks for this one daz. it looks really impressive.
member of the guild of professional dilettantes.
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
here's a quick tip -- use TEV as an enhancer without reverb or delay effect !
turn both echo times to 0ms
set both room / echo mixes fully to the left
TEV now operates using just the enhancer and filters sections
... and the wet / dry control becomes the NY control for what is effectively a side-band dynamics processor with balls
turn both echo times to 0ms
set both room / echo mixes fully to the left
TEV now operates using just the enhancer and filters sections
... and the wet / dry control becomes the NY control for what is effectively a side-band dynamics processor with balls
whiteLABEL - now set free : whiteLABEL ||
-
- KVRAF
- 2490 posts since 2 Jan, 2008 from denmark
what can i say,this one rocks,great job
http://soundcloud.com/subbasednb
YOUTUBE
http://www.youtube.com/user/SubbaseDnB/videos
SHOW YOUR SUPPORT BUY MY SAMPLEPACK
http://www.teamdnr.net/distorted-drums/
YOUTUBE
http://www.youtube.com/user/SubbaseDnB/videos
SHOW YOUR SUPPORT BUY MY SAMPLEPACK
http://www.teamdnr.net/distorted-drums/
-
- KVRAF
- 1942 posts since 22 Mar, 2002 from Timisoara, Romania
- KVRAF
- 4645 posts since 1 Aug, 2005 from Warszawa, Poland
Yay, it sounds nice and has a lot of parameters to play with. One remark (I hardly don't want it feel anywhere near a rant), I can't read mostly anything on 'display' on the right side, if it is dark font on white background, I can't read it, even if I stick my nose to monitor pane. Somebody should develop a vst magnifying glass for those on high-rez desktops....
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
thank guys - kind words
zombie Q : this is my new larger gui design
I'm on a 1280x768 (laptop) and 2x1280x1024 (daw) so for me, they're just approaching the large-side of comfortable, fwiw ...
I suppose there's always the windows magnifier
zombie Q : this is my new larger gui design
I'm on a 1280x768 (laptop) and 2x1280x1024 (daw) so for me, they're just approaching the large-side of comfortable, fwiw ...
I suppose there's always the windows magnifier
whiteLABEL - now set free : whiteLABEL ||
-
- Banned
- 352 posts since 5 Feb, 2009
congratulations & thanx for this very cool plugin
I noticed something regarding the stereo image though,
it sounds like everything come out in mono,
I did check the manual & the Auxilliary controls,
but even when I make sure that the output is set to stereo,
& even though I then see the left & right meters move individually in the plug,
I hear that the stereo width disappears & I see my host's meters behave
as if it was a mono signal (in FLstudio, I'm going to try it in Reaper) ...
maybe I'm missing something,
but I just thought I should let you know ...
I noticed something regarding the stereo image though,
it sounds like everything come out in mono,
I did check the manual & the Auxilliary controls,
but even when I make sure that the output is set to stereo,
& even though I then see the left & right meters move individually in the plug,
I hear that the stereo width disappears & I see my host's meters behave
as if it was a mono signal (in FLstudio, I'm going to try it in Reaper) ...
maybe I'm missing something,
but I just thought I should let you know ...
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
thanks - possibly an issue with modules falling asleep under some condition or other ... I'll try take a look - is there any particular series of events that provokes this behaviour ?
cheers
daz
cheers
daz
whiteLABEL - now set free : whiteLABEL ||
-
- Banned
- 352 posts since 5 Feb, 2009
ok, it works fine in Reaper (it sounds awesome actually )
& there's no particular series of events that provokes this behaviour in FLstudio 9,
I just open any instrument & put it through TEV & it happens ...
I'm going to try in FLstudio 8 now
& there's no particular series of events that provokes this behaviour in FLstudio 9,
I just open any instrument & put it through TEV & it happens ...
I'm going to try in FLstudio 8 now
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
FLstudio is something I have no experience of at all
apparently there is a setting for "use fixed buffer size" that you might wanna try ??
cheers
apparently there is a setting for "use fixed buffer size" that you might wanna try ??
cheers
whiteLABEL - now set free : whiteLABEL ||
-
- Banned
- 352 posts since 5 Feb, 2009
it's the same in FLstudio 8, & "fixed buffer size" didn't make it
(although it seems it gave more presence to the low registers for some reason) ...
I saw something that might explain this behaviour,
when I look in FL's Fruity Wrapper's processing window for your plugin,
it says :
Inputs :
1.
Outputs :
1. L Out
2. R Out
although when I look at the same processing window for other FXs,
it only shows one Output,
some just display : 1.
& some others display 1. leftOut / rightOut ...
& it seems that only some VST instruments allow multiple outputs,
like Kontakt or Addictive Drums on my computer,
but VST FXs only seem to have one stereo output ...
I hope this helps
(although it seems it gave more presence to the low registers for some reason) ...
I saw something that might explain this behaviour,
when I look in FL's Fruity Wrapper's processing window for your plugin,
it says :
Inputs :
1.
Outputs :
1. L Out
2. R Out
although when I look at the same processing window for other FXs,
it only shows one Output,
some just display : 1.
& some others display 1. leftOut / rightOut ...
& it seems that only some VST instruments allow multiple outputs,
like Kontakt or Addictive Drums on my computer,
but VST FXs only seem to have one stereo output ...
I hope this helps
- KVRian
- Topic Starter
- 1433 posts since 29 Jan, 2008 from Arboretum Avenue
I'm just setting about d/loading FLstudio's demo app - 181mb so, I'll install that this evening and have a play. I'm pretty sure you should be seeing 2 inputs.
you are feeding TEV from a stereo source, right ?
you are feeding TEV from a stereo source, right ?
whiteLABEL - now set free : whiteLABEL ||