Cherry Audio Voltage modular
-
- KVRian
- 650 posts since 12 Mar, 2002 from Rocklin, CA
I agree that add-on modules shouldn't duplicate the core stuff; that's not what I was saying. I meant that IMHO add-ons shouldn't duplicate stuff that's easily doable via VST plugins either - or, at least, if they do, they should offer more CV controls and other stuff that's unique to a modular environment. I'm sure the PSP stuff is high-quality and nice-sounding as it is, I just feel like I'd rather have more things that I can only do inside Voltage.
Ceej
aka Chris Hillery
aka Chris Hillery
- KVRAF
- 5948 posts since 8 Jul, 2009
I agree with you that the PSP modules could have more parameters CV controlled. They are lacking in that area. I like the ability to have these better sounding effects available as outputs to other modules - they sound better than the Core modules (the effects). If PSP put CV inputs with bipolar trims on them it would move the products to the next level.
#NONFR Check out my music at Bandcamp Free Streaming!
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
-
- KVRer
- 1 posts since 14 Sep, 2019
Hi everyone. First post here. Being new to it all, you didn't mention the Laboratory Voice modules. I use the module presets (different from patch preset) to store whole sounds since you can make a whole sound with those without knowing a ton about what to plug into what.Niowiad wrote: ↑Fri Sep 13, 2019 10:55 pm the MRB pretty much gives you supposedly "higher quality" versions of the fundamental modules (vco, vca, vcf, adsr), plus the distortion module and a frequency shifter
the PSP bundle gives a you a bunch of sound processors (eq, comp) and effects (delay, plate/hall/spring reverb, flanger, phaser, chorus, formant filter, comb filter, pitch shifter, bitcrusher)
it sure gives you more variety coming from Core
- KVRAF
- 5948 posts since 8 Jul, 2009
I was just going through new new free MRB preset pack and many of them use the voice modules - some very nice sounds and demonstrations of how useful they are. so yes those are useful too. All this talk about which bundles, is why I ended up with 9 of them this sale! Once I tried the demos I could see how unique and useful they all are together. It's might become challenging for devs to keep making unique modules but so far the ones on offer really make for a very powerful system. It does take time to learn what each modules does however and to remember. The library helps. I'd like to see a in each library listing beside "Add" that opens a pop up with the module desription - right now you have to right-click, select info, read and close. a pop up would make it a lot faster to learn and use the modules without much visual over-head.synthknitter wrote: ↑Sat Sep 14, 2019 1:52 amHi everyone. First post here. Being new to it all, you didn't mention the Laboratory Voice modules. I use the module presets (different from patch preset) to store whole sounds since you can make a whole sound with those without knowing a ton about what to plug into what.Niowiad wrote: ↑Fri Sep 13, 2019 10:55 pm the MRB pretty much gives you supposedly "higher quality" versions of the fundamental modules (vco, vca, vcf, adsr), plus the distortion module and a frequency shifter
the PSP bundle gives a you a bunch of sound processors (eq, comp) and effects (delay, plate/hall/spring reverb, flanger, phaser, chorus, formant filter, comb filter, pitch shifter, bitcrusher)
it sure gives you more variety coming from Core
#NONFR Check out my music at Bandcamp Free Streaming!
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
- KVRAF
- 5948 posts since 8 Jul, 2009
You can get the PSP Ultimate at everyplugin for $70! http://everyplugin.com/psp-modular-coll ... dular.html
#NONFR Check out my music at Bandcamp Free Streaming!
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
-
- KVRist
- 399 posts since 25 Aug, 2018
Sold!
I was thinking about the PSPs and thinking it would be nice to have even modules that might be covered by VSTs internal so that the work flow would not be broken up so much. I am not so into this yet that I have go to VSTs that I can pull up on a whim. In my mind it would easier to search for a reverb within Voltage rather than add a host and then go searching for an external VST to do the job.
I was thinking about the PSPs and thinking it would be nice to have even modules that might be covered by VSTs internal so that the work flow would not be broken up so much. I am not so into this yet that I have go to VSTs that I can pull up on a whim. In my mind it would easier to search for a reverb within Voltage rather than add a host and then go searching for an external VST to do the job.
- KVRAF
- 3187 posts since 31 Dec, 2004 from People's Republic of Minnesota
So do the third-party modules have unique algorithms? Or are they standard building blocks available to anyone? I was looking at some of the demo videos of the builder and I couldn’t find it.
-
- KVRian
- 1353 posts since 6 Jul, 2004
Everything's done in Java, except for the interface builder. There are a few pre-made Java blocks that you can use (i.e. sine, noise, etc.), but anything more complicated than that will require additional development.masterhiggins wrote: ↑Sat Sep 14, 2019 12:41 pm So do the third-party modules have unique algorithms? Or are they standard building blocks available to anyone? I was looking at some of the demo videos of the builder and I couldn’t find it.
Michael, Developer at Unfiltered Audio:
http://www.unfilteredaudio.com
http://soundcloud.com/the-february-thaw
http://mhetrick.github.com
http://www.unfilteredaudio.com
http://soundcloud.com/the-february-thaw
http://mhetrick.github.com
- KVRAF
- 3187 posts since 31 Dec, 2004 from People's Republic of Minnesota
Oh okay. I was just wondering. In the event that advanced users wanted to start modifying circuit-component values. I didn’t know how deep it went.thelizard wrote: ↑Sat Sep 14, 2019 2:18 pmEverything's done in Java, except for the interface builder. There are a few pre-made Java blocks that you can use (i.e. sine, noise, etc.), but anything more complicated than that will require additional development.masterhiggins wrote: ↑Sat Sep 14, 2019 12:41 pm So do the third-party modules have unique algorithms? Or are they standard building blocks available to anyone? I was looking at some of the demo videos of the builder and I couldn’t find it.
-
- KVRist
- 260 posts since 30 Mar, 2019
New developer here, I am wondering if anyone can point me in the direction of looking at the raw Library code for the various provided libraries with Designer. I can't figure out where they are located.
For example, at the top of the Filter Example Code, there is a line that says "package com.cherryaudio.filter"
I assume this is importing the library for use, but I can't figure out where on my computer this is located so I can read the raw code for the filter library.
For example, at the top of the Filter Example Code, there is a line that says "package com.cherryaudio.filter"
I assume this is importing the library for use, but I can't figure out where on my computer this is located so I can read the raw code for the filter library.
-
- KVRist
- 260 posts since 30 Mar, 2019
I can't figure out for the life of me how this Java works and how the Designer actually is compiling stuff.
I am curious about looking at the raw DSP code in some of the modules this is giving me a headache though to locate all those class files. The documentation doesn't say anything about them beyond providing a little API information in a popup. I want to actually look at the code, is that possible? It should be on my computer somewhere, as it says "import voltage.filter" or whatever at the top, so it's clearly importing them from my hard drive. I am new using Java so I don't really understand how this Designer is actually working either with regard to how it compiles and uses directories.
I don't really get how this works. For instance, is the "SaturatedAnalogFilter" Java code file available to read so I can take a closer look at the class functions and how they work?
I am curious about looking at the raw DSP code in some of the modules this is giving me a headache though to locate all those class files. The documentation doesn't say anything about them beyond providing a little API information in a popup. I want to actually look at the code, is that possible? It should be on my computer somewhere, as it says "import voltage.filter" or whatever at the top, so it's clearly importing them from my hard drive. I am new using Java so I don't really understand how this Designer is actually working either with regard to how it compiles and uses directories.
I don't really get how this works. For instance, is the "SaturatedAnalogFilter" Java code file available to read so I can take a closer look at the class functions and how they work?
- KVRian
- 679 posts since 29 Nov, 2002 from Finland
You can't see the source code of the libraries/packages or any CA or 3rd-party modules (except the example modules that come with MD), because they only exist on your computer as compiled Java bytecode, not as source .java files. I suggest reading a little about Java and how the JVM + bytecode works, I'm sure Module Designer will also become easier to understand after that!mxbf wrote: ↑Sat Sep 14, 2019 5:21 pm I am curious about looking at the raw DSP code in some of the modules this is giving me a headache though to locate all those class files. The documentation doesn't say anything about them beyond providing a little API information in a popup. I want to actually look at the code, is that possible? It should be on my computer somewhere, as it says "import voltage.filter" or whatever at the top, so it's clearly importing them from my hard drive. I am new using Java so I don't really understand how this Designer is actually working either with regard to how it compiles and uses directories.
Last edited by Captain on Sat Sep 14, 2019 5:42 pm, edited 1 time in total.
- KVRian
- 679 posts since 29 Nov, 2002 from Finland
The GUI elements are also automatically turned into Java code, and you can create GUI elements by writing code too, if you wish.
There's actually a pretty good selection of basic tools provided by Cherry Audio that you can use as building blocks in your own modules (filters, oscillators, envelope, LFO, distortion, delay, reverb, etc). Some of them are quite.... basic (I'm looking at you, reverb), but many of them are perfectly usable, depending on what you are trying to do.
- KVRian
- 679 posts since 29 Nov, 2002 from Finland
Actually, the "package" line sets the package name for the current module, it does not import anything. The name could be just about anything, but there are certain conventions you are supposed to follow when naming your Java packages. The actual imports are just below it.mxbf wrote: ↑Sat Sep 14, 2019 4:50 pm For example, at the top of the Filter Example Code, there is a line that says "package com.cherryaudio.filter"
I assume this is importing the library for use, but I can't figure out where on my computer this is located so I can read the raw code for the filter library.