Charlatan 2.0 Final Free VA synth released (Windows)
-
- KVRian
- 881 posts since 28 Sep, 2012 from Norway
Any other number than 0 works too, doesn't it?sbj wrote:When on BandCamp press the Buy Now button and enter a price as 0 (zero).Timfonie wrote:There's only the sound demos. I see nowhere a link to the presets.
In that download you'll find the presets + Sound demos and other relevant stuff.
Cheers
Thanks, I will play with these soon
- KVRian
- 507 posts since 30 Dec, 2011 from Europe
--- EDIT ---
Nevermind, all fine now, I just downloaded the latest beta 2.0b3 couple of minutes ago and it shows fine, gui is visible now on both Cantabile versions (x86 and x64).
Thanks again for this awesome synth and dev dedication and work
Bests
-------
Hi, synth is awesome, update too! Thanks
Anyway just reporting a black screen of beta 2.0 b1 on Cantabile free, both the x86 and x64 versions.
Cheers.
Nevermind, all fine now, I just downloaded the latest beta 2.0b3 couple of minutes ago and it shows fine, gui is visible now on both Cantabile versions (x86 and x64).
Thanks again for this awesome synth and dev dedication and work
Bests
-------
Hi, synth is awesome, update too! Thanks
Anyway just reporting a black screen of beta 2.0 b1 on Cantabile free, both the x86 and x64 versions.
Cheers.
Last edited by Diego_C on Fri Jun 05, 2015 2:05 pm, edited 1 time in total.
-
phdsg vn chfhn phdsg vn chfhn https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=308608
- KVRist
- 74 posts since 14 Jul, 2013
i also have to report a (some) gui-issue(s) with the new fancy popup/dropdown menus.
i use a multimonitor setup.
when the synth-gui is on a secondary screen, the new themed popups (waveform, filtertype, lfotype) appear on the edge of the main screen.
the old windows-themed popups (voices, lfophase, lfosync) are ok, except there is none for osc2-octave, but i don't remember how it was in 1.x.
also, these new themed popups do not close themselves for other controls, if that describes it correctly.
basically, if i click i.e. lfotype, but then (without selecting a new type) instead want to change something else,
i have to "waste" one click to close the lfotype-dropdown, before i can change anything else.
again, win-themed ones behave as expected.
using 2.0b3 x64 vst in reaper_x64 win7_x64, i5, nvidia gpu
i use a multimonitor setup.
when the synth-gui is on a secondary screen, the new themed popups (waveform, filtertype, lfotype) appear on the edge of the main screen.
the old windows-themed popups (voices, lfophase, lfosync) are ok, except there is none for osc2-octave, but i don't remember how it was in 1.x.
also, these new themed popups do not close themselves for other controls, if that describes it correctly.
basically, if i click i.e. lfotype, but then (without selecting a new type) instead want to change something else,
i have to "waste" one click to close the lfotype-dropdown, before i can change anything else.
again, win-themed ones behave as expected.
using 2.0b3 x64 vst in reaper_x64 win7_x64, i5, nvidia gpu
- KVRist
- Topic Starter
- 406 posts since 6 Apr, 2008
2.0 Final released!
Changes
Changes
- Fix loading of 1.x presets
- Fix popup menus with multiple monitors
- Make Amp envelope sustain parameter logarithmic
- Fix old presets (LFO Wave), add some new ones
- Reduce pitch drift
Last edited by karrikuh on Fri Jun 05, 2015 6:44 pm, edited 1 time in total.
-
phdsg vn chfhn phdsg vn chfhn https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=308608
- KVRist
- 74 posts since 14 Jul, 2013
wow, that was fast. thx
- KVRAF
- 7691 posts since 11 Jun, 2006
you ROCK, Sir! thank you, thank you!karrikuh wrote:2.0 Final released!
ChangesThanks everybody for testing/reporting/creating patches!
- Fix loading of 1.x presets
- Fix popup menus with multiple monitors
- Make Amp envelope sustain parameter logarithmic
- Fix old presets (LFO Wave), add some new ones
- Reduce pitch drift
HW SYNTHS [KORG T2EX - AKAI AX80 - YAMAHA SY77 - ENSONIQ VFX]
HW MODULES [OBi M1000 - ROLAND MKS-50 - ROLAND JV880 - KURZ 1000PX]
SW [CHARLATAN - OBXD - OXE - ELEKTRO - MICROTERA - M1 - SURGE - RMiV]
DAW [ENERGY XT2/1U RACK WINXP / MAUDIO 1010LT PCI]
HW MODULES [OBi M1000 - ROLAND MKS-50 - ROLAND JV880 - KURZ 1000PX]
SW [CHARLATAN - OBXD - OXE - ELEKTRO - MICROTERA - M1 - SURGE - RMiV]
DAW [ENERGY XT2/1U RACK WINXP / MAUDIO 1010LT PCI]
-
- KVRAF
- 2989 posts since 5 Nov, 2014
Awesome
- KVRist
- Topic Starter
- 406 posts since 6 Apr, 2008
Octave control works via click-drag (just like pots and faders). As someone mentioned before, this can be considered an inconsistency given that all other controls for discrete values are dropdown menus.phdsg vn chfhn wrote:except there is none for osc2-octave, but i don't remember how it was in 1.x.
I might change this in the future.
I'm aware of this, unfortunately I don't know how to fix this currently.phdsg vn chfhn wrote:also, these new themed popups do not close themselves for other controls, if that describes it correctly.
basically, if i click i.e. lfotype, but then (without selecting a new type) instead want to change something else,
i have to "waste" one click to close the lfotype-dropdown, before i can change anything else.
again, win-themed ones behave as expected.
-
phdsg vn chfhn phdsg vn chfhn https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=308608
- KVRist
- 74 posts since 14 Jul, 2013
certainly no biggie.karrikuh wrote: [..]
I'm aware of this, unfortunately I don't know how to fix this currently.
me personally, i prefer the old win-themed menus.
- KVRian
- 1209 posts since 28 Jun, 2005
Hi karrikuh,
Loading a project made with v2.0 beta3 in FLStudio 11.1.1 after replacing the dll with the new one, makes the Amp sustain value go to max (100%) on all instances of Charlatan, the values are correct when I replace the dll with the old one.
Is this a bug or should I not have used the beta3 ?
Loading a project made with v2.0 beta3 in FLStudio 11.1.1 after replacing the dll with the new one, makes the Amp sustain value go to max (100%) on all instances of Charlatan, the values are correct when I replace the dll with the old one.
Is this a bug or should I not have used the beta3 ?
-
- KVRist
- 184 posts since 3 Apr, 2015
I'm getting this with 2.0 Final in Cubase LE6 (32-bit on Win 7):
Open new instance (with 'empty' patch)
Play note
Set voices to 7
Play note - get higher pitched sound
Move the detune knob
Back to original note
Also, when the project is reloaded the initial sound is again high-pitched until the detune knob is tweaked.
Open new instance (with 'empty' patch)
Play note
Set voices to 7
Play note - get higher pitched sound
Move the detune knob
Back to original note
Also, when the project is reloaded the initial sound is again high-pitched until the detune knob is tweaked.
-
- KVRist
- 363 posts since 4 Jul, 2007
I know right? You have paid so much money for this synth so you have the right to demand whatever you like right?toothnclaw wrote:Add a f**king hi-pass filter type, for f**k's sake!
PLEASE!!!
To the Dev - in between rolling around the floor in piles of cash that freeware synths must give you, can you take some time out from your day job to add a hi-pass filter type? Otherwise toothnclaw may ask for a refund.
Back in reality...I love this synth to death - does more than many of the paid VAs I own and has a lovely timbre.Downloading V2 now...