Program change take 2
-
antoinesalathe antoinesalathe https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=231083
- KVRer
- Topic Starter
- 16 posts since 4 May, 2010 from Quebec / St Lin
Hello all
In my keyboard controler manual it is written ...
Select
The Select button assigns the "-" and "+" buttons to one of three parameters as indicated by a dot along the
lower edge of the LED display:
GLOBAL; The - / + buttons set the global MIDI channel.
PGM (program); The - / + buttons transmit program change messages.
PRESETS; The - / + buttons step through and load Oxygen presets from its 10 memory locations.
"-" and "+" Buttons
These buttons are used in combination with the Select button, to decrease (-) or increase (+) the
value of the currently active function or parameter (Global MIDI channel, Program Change, Preset
Number)...
Now if I understand correctly, if I press the select button
once = Change Midi channel
Twice = Program change (I hope it means change the sound ... example piano to flute) ( this is what I want to do, from my keyboard do a program change)
tree time = a program preset
So when I press twice I can select 0 to 127 with the + or - button (I guess its 128 sounds)
Any clue why nothing happend in Mulab when I change a value ??? Even if I change the Midi channel nothing new happens (I still hear myself hitting a note on the keyboard.
In my keyboard controler manual it is written ...
Select
The Select button assigns the "-" and "+" buttons to one of three parameters as indicated by a dot along the
lower edge of the LED display:
GLOBAL; The - / + buttons set the global MIDI channel.
PGM (program); The - / + buttons transmit program change messages.
PRESETS; The - / + buttons step through and load Oxygen presets from its 10 memory locations.
"-" and "+" Buttons
These buttons are used in combination with the Select button, to decrease (-) or increase (+) the
value of the currently active function or parameter (Global MIDI channel, Program Change, Preset
Number)...
Now if I understand correctly, if I press the select button
once = Change Midi channel
Twice = Program change (I hope it means change the sound ... example piano to flute) ( this is what I want to do, from my keyboard do a program change)
tree time = a program preset
So when I press twice I can select 0 to 127 with the + or - button (I guess its 128 sounds)
Any clue why nothing happend in Mulab when I change a value ??? Even if I change the Midi channel nothing new happens (I still hear myself hitting a note on the keyboard.
Shake like crazy ....
Antoine
Antoine
- KVRAF
- 12744 posts since 24 Jun, 2008 from Europe
The MU.LAB synths do not respond to program change.
When you send program changes to a VSTi, it might work, it depends on the VSTi.
When you send program changes to a VSTi, it might work, it depends on the VSTi.
- KVRAF
- 7137 posts since 8 Feb, 2003 from London, UK
-
antoinesalathe antoinesalathe https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=231083
- KVRer
- Topic Starter
- 16 posts since 4 May, 2010 from Quebec / St Lin
so if I understand correctly
The MU.LAB synths : are sounds from Mulab not my midi card (the ones i.m hering now)
If so, i'm less confused
I was always under the impression I was trying to send a program change to my soundcard.
The MU.LAB synths : are sounds from Mulab not my midi card (the ones i.m hering now)
If so, i'm less confused
I was always under the impression I was trying to send a program change to my soundcard.
Shake like crazy ....
Antoine
Antoine