here the tune (btw awsome one! soon on armin cd):
http://www.youtube.com/watch?v=JbjxyEW- ... r_embedded
you hear the bass sound on start (00:15sec)
i hear it's 2 bass line
but not get something close .
tnx for help
Hi There! question about "Dash Berlin Bass Sound" from armin asot.
-
- KVRer
- Topic Starter
- 15 posts since 24 Oct, 2009
-
- KVRist
- 198 posts since 20 Jan, 2006
Cool sound, yes. I've been trying this out myself.
It's only one bass sound but the left channel is delay around 10-20 ms or so. It's basically a saw with white noise and distortion. I think the key is the saw - if you have trilogy try out different saw waveforms and see if any one comes close - and the distortion. I've tried Ohmcide and kinda came close. Then just delay the left channel around 12 ms (rip the audio from that vid and look at the waveform to see exactly how much) and some white noise and you're set
It's only one bass sound but the left channel is delay around 10-20 ms or so. It's basically a saw with white noise and distortion. I think the key is the saw - if you have trilogy try out different saw waveforms and see if any one comes close - and the distortion. I've tried Ohmcide and kinda came close. Then just delay the left channel around 12 ms (rip the audio from that vid and look at the waveform to see exactly how much) and some white noise and you're set
-
- KVRer
- Topic Starter
- 15 posts since 24 Oct, 2009
i work on mac with logic 9 and i don't have trilogy i have omnisphere and sylnthe1 zebra es2 massive largo
i think massive will fit to this job
i think massive will fit to this job
-
- KVRer
- Topic Starter
- 15 posts since 24 Oct, 2009
but if someone have other idea are welcome
