Xenakios HourGlass 1.4.5 granular processor (OS-X too), grab it while it lasts!
- KVRian
- 725 posts since 30 May, 2007 from Syracuse, NY, USA
I will now proceed to hold my breath, until to Mac OSX version arrives.
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
Yes, that's right, it should run from HourGlass.exe without any further actions after unzipping the zip-file. (If everything goes well, that is.)VariKusBrainZ wrote:
Thanks for the fast reply
Could be an older .ini file is still in there, Ill check later
So the default install doesnt require me to move any files anywhere?
I will try to see what I could do about the settings ini-file triggering crashes, as that has been reported many times already and often deleting the ini-file has helped. There might be a problem in the code that parses and applies the settings on launch. It would also be helpful if there was some way to automatically delete/bypass the ini-file at start-up. I will look into these things. (That would also be helpful for the OS-X port, as the settings file might be pretty deep/hidden in the OS-X file system...)
The PortAudio issue might also benefit from the ability to use the alternative dll more easily...
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
Bump for 1.0.1 :
http://xenakios.wordpress.com/2012/04/2 ... -released/
Sorry, no OS-X version even as an alpha yet... Hopefully someday soon...
http://xenakios.wordpress.com/2012/04/2 ... -released/
Sorry, no OS-X version even as an alpha yet... Hopefully someday soon...
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
Bump for 1.0.2 beta for OS-X
http://xenakios.wordpress.com/2012/05/0 ... -for-os-x/
I will also try to post 1.0.2 for Windows later today or so...(There are no substantial changes though compared to 1.0.1). The download server for the Windows builds is down anyway at the moment, sorry about that.
http://xenakios.wordpress.com/2012/05/0 ... -for-os-x/
I will also try to post 1.0.2 for Windows later today or so...(There are no substantial changes though compared to 1.0.1). The download server for the Windows builds is down anyway at the moment, sorry about that.
-
- KVRAF
- 3231 posts since 18 May, 2003 from Sweden
Thank you very much for the Mac beta! Like smuff reported, it seems to run fine on 10.6.8.
Is there some kind of manual available anywhere? Playing around, I think I've got the hang of the basics but some instructions wouldn't come amiss…
Best,
Joachim
Is there some kind of manual available anywhere? Playing around, I think I've got the hang of the basics but some instructions wouldn't come amiss…
Best,
Joachim
If it were easy, anybody could do it!
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
Sorry, there is no manual. Doing one would be a major task...And kind of a dubious effort to go into as HourGlass is clearly a fringe software that is likely to never have a large user base. (And it isn't really meant to be that way either. It's my personal attempt to do a sound fragmenter/granular sampler for my own needs.)Spitfire31 wrote:Thank you very much for the Mac beta! Like smuff reported, it seems to run fine on 10.6.8.
Is there some kind of manual available anywhere? Playing around, I think I've got the hang of the basics but some instructions wouldn't come amiss…
Best,
Joachim
Have you watched the videos at YouTube :
http://www.youtube.com/user/Xenakios?ob=0
They are not really "tutorials", but they should show some of the features available and what to expect of the sound results. (I really should do some actual tutorial videos, those are much more easier and faster anyway to do than to produce a written manual...)
-
- KVRer
- 29 posts since 9 Jun, 2011 from Leicester
This is the best granulator I have ever worked with. It sounds great it is flexible I love it!
I have used, Crusher X, Composers desktop project, Cecilia Kyma MaxMSP you name it. I have a suspicion that you might be wrong about this being a niche product. I know quite a few people who will like this.
Many thanks.
Best
S
I have used, Crusher X, Composers desktop project, Cecilia Kyma MaxMSP you name it. I have a suspicion that you might be wrong about this being a niche product. I know quite a few people who will like this.
Many thanks.
Best
S
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
Bump for version 1.0.3 (edit : OS-X build now posted too)
http://xenakios.wordpress.com/2012/05/1 ... -released/
http://xenakios.wordpress.com/2012/05/1 ... -released/
Last edited by Xenakios on Mon May 14, 2012 3:29 pm, edited 1 time in total.
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
Thanks for the compliments! During the years I have also used various granulator softwares and become familiar with various shortcomings in them which I've tried to fix/change in HourGlass. (Also of course I've taken things I've liked from them... )smuff wrote:This is the best granulator I have ever worked with. It sounds great it is flexible I love it!
I have used, Crusher X, Composers desktop project, Cecilia Kyma MaxMSP you name it. I have a suspicion that you might be wrong about this being a niche product. I know quite a few people who will like this.
Many thanks.
Best
S
-
- KVRist
- 391 posts since 11 May, 2005 from France
I confirm OSC is running well, thanks a lot for this one !
I use Usine to send several automation via XY pads and a tactile screen, will be great.
I notice a strange bug when i automate transposition center via OSC, many graphics elements move in the same time..?, can send you a screen capture if needed.
and a little suggestion : an option " automatic create snapshots for each source" in the sounds source menu..?
I use Usine to send several automation via XY pads and a tactile screen, will be great.
I notice a strange bug when i automate transposition center via OSC, many graphics elements move in the same time..?, can send you a screen capture if needed.
and a little suggestion : an option " automatic create snapshots for each source" in the sounds source menu..?
-
- KVRian
- Topic Starter
- 1265 posts since 9 Sep, 2005 from Oulu, Finland
The only obvious thing I can quickly think of about one OSC message changing many things at once is that you have multiple parameters assigned to one OSC message. (Which is allowed on purpose.) Please do send a screen capture, if possible...nay-seven wrote:I confirm OSC is running well, thanks a lot for this one !
I use Usine to send several automation via XY pads and a tactile screen, will be great.
I notice a strange bug when i automate transposition center via OSC, many graphics elements move in the same time..?, can send you a screen capture if needed.
and a little suggestion : an option " automatic create snapshots for each source" in the sounds source menu..?
-
- KVRist
- 391 posts since 11 May, 2005 from France
ok, find it here :http://nay-seven.com/beta/HG_bug.avi
-
- KVRist
- 391 posts since 11 May, 2005 from France
And i just notice it's not an OSC problem, even with the mouse if I move the little knob of Transposition centre, I've the same result...
win7,32bits
win7,32bits