Login / Register 0 items | $0.00 New @ KVR
CMT
KVRist
 
120 posts since 1 Aug, 2012

Postby CMT; Wed Mar 28, 2018 2:46 am Re: Trans Computer Maschine v2.50 RC3

Echoes in the Attic wrote:DAWs are abandoning 32 bit compatibility more and more so that list will continue to shrink over time.

As far as we know, apart from Steinberg-Yamaha, all the others that have been compatible from the beginning remain so. Luckily, not everyone in the world is lobbyng for planned obsolescence.
CMT
KVRist
 
120 posts since 1 Aug, 2012

Postby CMT; Sat Apr 07, 2018 1:18 am Re: Trans Computer Maschine v2.50 RC3

A quick update is on the go because we have detected an issue using n-Track Studio. This DAW sends certain MIDI controller data to the loaded virtual instruments by default. Since the numbers assigned to these controllers are also assigned to the MIDI control of some T-C-M parameters, the latter change each time n-Track Studio starts or stops. Since these CC numbers are also traditionally used in MIDI hardware for playback synchronization, we've decided to review the pre-assigned MIDI map to avoid any potential problems related to their use.
Image
Hang on a bit!

The CMT Team
CMT
KVRist
 
120 posts since 1 Aug, 2012

Postby CMT; Mon Apr 16, 2018 8:16 pm Re: Trans Computer Maschine v2.50 RC3

Echoes in the Attic wrote:DAWs are abandoning 32 bit compatibility more and more so that list will continue to shrink over time.

Well, the truth is that it has spread instead of shrinking. :)

After many tests we have updated our list of 64-bit "friendly software", capable of loading "T-C-M" and other virtual instruments available in 32-bit only. Unfortunately, users of Ableton, Presonus and MOTU products will still not be able to use 32 and 64-bit plug-ins simultaneously, so they must choose wisely before installation. On the other hand, starting with Cubase 9 and Nuendo 8, Steinberg only offers 64-bit versions without 32-bit VST support (compatibility for old projects, totally lost!).

What follows is the 2018 updated list of 64-bit "friendly software" capable of loading 32 and 64-bit VST instruments simultaneously:

- Acoustica Mixcraft 7 / 8
- Bitwig Studio 1 / 2
- Bremmers Audio Design MultitrackStudio 8.5
- Cakewalk by BandLab 24
- Cakewalk Music Creator 7
- Cakewalk Sonar 23
- Cockos Reaper 5
- Image Line FL Studio 12.5
- Internet ABILITY Pro 2.5
- LMMS 1.13
- MAGIX Samplitude Pro 13 / 14
- MAGIX Sequoia 13 / 14
- n-Track Studio 8 / 9
- Steinberg Cubase 8 / 8.5
- Steinberg Nuendo 7

We hope that this list can be useful to all those who are against planned obsolescence. :tu:

The CMT Team
CMT
KVRist
 
120 posts since 1 Aug, 2012

Postby CMT; Wed Apr 25, 2018 6:29 am Re: Trans Computer Maschine v2.50 RC4

====================
Latest Version Updates
====================

v2.50 RC4
- Added some automatic resets for smoothly 'MIDI Ch. Router' operation.
- Fixed sequencer stuck after pressing synth randomize followed by 'RESET'.
- Removed some superfluous parameter automation.
- Revised MIDI CC mapping for better compatibility (no more issues in n-Track Studio).

v2.50 RC3
- Added 'KBD' and 'SEQ' set buttons to speed up some basic routings.
- Fixed noise clicks when selecting 'SH Mixer' from Oscillators FM sources.
- Fixed Oscillator 2 'Sync' not working for triangle shape.
- Fixed 'Portamento' and 'Output Lag' controls not matching displayed time.
- Improved the reading of values by adding dark blue background displays.
- Increased 'Portamento' time to 2 seconds, as it is in the ARP 2600.

v2.50 RC2
- Added Oscillators MIDI input 'RESET'.
- Added Sequencer blinking alert in 'Synth Ch.' display for 'Gate' mode.
- Added Sequencer internal gating options for 'Pitch' and 'Ctrls' outputs.
- Added Sequencer start step setting (Synth Ch. Reset menu).
- Added un-synced 'LFO' frequency memory.
- Changed 'inverted Envelopes' behaviour to unipolar negative.
- Fixed CPU overload and Sequencer jitter while switching patches.
- Fixed Envelopes not loading set mode after loading host project.
- Fixed 'LFO' triggering noise click after changing patch.
- Fixed occasional 'LFO' resetting at wrong times.
- Fixed Sequencer 'Pulse Width' showing slightly offset values.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Fixed signal flow display messed up after loading host project.
- Fixed some switches not responding to full MIDI range.
- Improved 'Filter' modulation indicators.
- Improved filtering link, now featuring bandwidth control.
- Improved GUI, disabling filters on inactive 'Audio Mixer' buses.
- Improved Sequencer external/human triggering and gating.
- Improved Sequencer 'Random' mode algorithm.
- Improved Sequencer 'Skip' and 'ON' buttons interaction.
- Improved value displays, discarding decimals for very large numbers.
- Removed Patch selection GUI controls (was added in previous beta).
Halonmusic
KVRAF
 
1544 posts since 13 Nov, 2015, from Norway

Postby Halonmusic; Wed Apr 25, 2018 9:01 am Re: Trans Computer Maschine v2.50 RC4

Thanks ;)
Dullee
KVRist
 
93 posts since 9 Mar, 2018

Postby Dullee; Fri Apr 27, 2018 9:18 am Re: Trans Computer Maschine v2.50 RC4

Unfortunately, users of Ableton, Presonus and MOTU products will still not be able to use 32 and 64-bit plug-ins simultaneously, so they must choose wisely before installation.


What is really not wise is that you keep saying that.

There's nothing unwise about using Steinberg, Ableton, Presonus and MOTU DAWs. These are all professional tools used by thousands of professionals everyday. Can't argue with that!

There are ways to use both 32/64 bit in all DAWs in this day and age, so drop that "choose wisely" talk already. It doesn't make you smart saying what you're saying. To the contrary, it looks dumb, unprofessional and unnecessary.

Respect your users regardless of what DAW they employ for their work. It doesn't make them less wise. Everyone is entitled to choose whatever environment they are comfortable to work in.

Period.
User avatar
BlackWinny
KVRAF
 
3500 posts since 17 Jun, 2013, from very close to Paris, France

Postby BlackWinny; Fri Apr 27, 2018 9:49 am Re: Trans Computer Maschine v2.50 RC4

Hey Walter !

TCM is the blast on my 64-bit BandLab Cakewalk (which is freeware).
:tu:

Jacques
Build your life everyday as if you would live for a thousand years. Marvel at the Life everyday as if you would die tomorrow.
CMT
KVRist
 
120 posts since 1 Aug, 2012

Postby CMT; Fri Apr 27, 2018 10:46 pm Re: Trans Computer Maschine v2.50 RC4

Dullee wrote:
drop that "choose wisely" talk already. It doesn't make you smart saying what you're saying. To the contrary, it looks dumb, unprofessional and unnecessary.

We regret the misunderstandings but even more the aggressions so here we go again (extended version explained):

Unfortunately, users of Ableton, Presonus and MOTU products will still not be able to use 32 and 64-bit plug-ins simultaneously natively, so they must choose wisely before installation: if they plan to use 32-bit plugins, they should not forget to install the 32-bit version of their beloved DAW.
Previous

Moderator: KVR Moderators (Main)

Return to Instruments