Thanks, I will check this out.mutantdog wrote:This seems like a bug to me....
I disable the distribution view, but when i later re-open the project and open the plugin window, the distribution is visible. According to the view menu, distribution is still switched off, switching it back on resizes the GUI, switching it off again removes the view but the GUI remains resized.
VST 2, 64-bit, Ableton 9.7, Win10.
Youlean Loudness Meter 2 - V2.5.2 - April 25, 2022 update
- KVRist
- Topic Starter
- 444 posts since 11 May, 2016 from Serbia
Website: https://youlean.co/
-
Valery_Kondakoff Valery_Kondakoff https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=216825
- KVRist
- 121 posts since 5 Oct, 2009 from Moscow, Russia
Any news on development process?
CU
VK
VK
-
- KVRAF
- 4711 posts since 26 Nov, 2015 from Way Downunder
And what of Freq-Balancer?
- KVRist
- Topic Starter
- 444 posts since 11 May, 2016 from Serbia
V2 is close to be finished. I am currently working on Export feature and after that I have to implement copy protection for PRO version + redesign GUI a bit and that is it. Unfortunately because I am using IPlug for this plugin I had to add a lot of new features to the framework so in order to have resizing, scaling, vector graphics etc. so that's why V2 is taking so long to do, but once I release it you can expect much quicker updates. Also you could expect GUI scaling and other features to show in plugins from other companies too since I am making all changes available on my GitHub and many companies are using IPlug...Valery_Kondakoff wrote:Any news on development process?
viewtopic.php?f=33&t=485801&hilit=youlean#p6800087
If you have Facebook look here to see what else is coming:
https://www.facebook.com/itsYoulean/pos ... 4597235928
Last edited by Youlean on Thu Nov 09, 2017 12:41 pm, edited 1 time in total.
Website: https://youlean.co/
- KVRist
- Topic Starter
- 444 posts since 11 May, 2016 from Serbia
Unfortunately Freq-Balancer will have to wait until I finish Loudness Meter...MogwaiBoy wrote:And what of Freq-Balancer?
Website: https://youlean.co/
-
- KVRAF
- 1795 posts since 17 May, 2005
Freq-Balancer is an amazing help for starting mixers and fast handy utility for accomplished mixers. The new one will be a must buy.Youlean wrote:Unfortunately Freq-Balancer will have to wait until I finish Loudness Meter...MogwaiBoy wrote:And what of Freq-Balancer?
Good luck with the Loudness Meter for now! And hurry
-
Obsolete236871 Obsolete236871 https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=236871
- Banned
- 821 posts since 4 Aug, 2010
Is it still developed?
I would like to make the following feature suggestion:
--> presets for digital streaming platforms / digital distribution (Youtube, Itunes / Apple Music, Spotify etc)
I would like to make the following feature suggestion:
--> presets for digital streaming platforms / digital distribution (Youtube, Itunes / Apple Music, Spotify etc)
- KVRAF
- 1959 posts since 21 Sep, 2007 from The Infinite Void
I'd love to see some more activity on this too. Even a 1.5.1 beta would give me some hope this ain't been abandoned.
I've made a mental list of some minor improvements i'd like to see implemented which i'll post here when i remember.
I've made a mental list of some minor improvements i'd like to see implemented which i'll post here when i remember.
- KVRAF
- 1959 posts since 21 Sep, 2007 from The Infinite Void
I've just seen that this has had a few updates recently, currently at v1.9.4 BETA. Looks like v2 is on the way.
- KVRAF
- 1959 posts since 21 Sep, 2007 from The Infinite Void
I don't know if the dev is still following this thread but here goes anyway.
So I've been using the 1.9.4 BETA lately and it's definitely looking a lot nicer. I did find one graphical bug which I can't describe from memory but will try and reproduce. I'd really like to see at least one extra time iteration between 1 hour and 2 hours, i've used v1.5.0 for mastering a couple of albums that have been a little over 60 minutes long and zooming out to two hours seems a little over the top to visualise the whole thing.
Any ideas on what the PRO version will be priced at?
So I've been using the 1.9.4 BETA lately and it's definitely looking a lot nicer. I did find one graphical bug which I can't describe from memory but will try and reproduce. I'd really like to see at least one extra time iteration between 1 hour and 2 hours, i've used v1.5.0 for mastering a couple of albums that have been a little over 60 minutes long and zooming out to two hours seems a little over the top to visualise the whole thing.
Any ideas on what the PRO version will be priced at?
- KVRist
- Topic Starter
- 444 posts since 11 May, 2016 from Serbia
Thanks for the suggestions. For some reason I don't get email notifications for new replys here.mutantdog wrote:I don't know if the dev is still following this thread but here goes anyway.
So I've been using the 1.9.4 BETA lately and it's definitely looking a lot nicer. I did find one graphical bug which I can't describe from memory but will try and reproduce. I'd really like to see at least one extra time iteration between 1 hour and 2 hours, i've used v1.5.0 for mastering a couple of albums that have been a little over 60 minutes long and zooming out to two hours seems a little over the top to visualise the whole thing.
Any ideas on what the PRO version will be priced at?
I can't speak akout pricing yet, but ut won't be priced (stupidly) high as other loudness meters.
Not sure if I add 1.5h mark but I will try. Ideally that window should be freely adjustable.
Website: https://youlean.co/
-
- KVRer
- 9 posts since 4 Sep, 2016
Hi Youlean,
Love your product - thanks for making it available.
Quick question on intervals for the various measurements. This is my understanding:
Momentary = 400ms
Short Term = 3s
Integrated = Mean to date
What interval then is Loudness Range calculated over?
Thanks,
Colin
Love your product - thanks for making it available.
Quick question on intervals for the various measurements. This is my understanding:
Momentary = 400ms
Short Term = 3s
Integrated = Mean to date
What interval then is Loudness Range calculated over?
Thanks,
Colin
- KVRist
- Topic Starter
- 444 posts since 11 May, 2016 from Serbia
Thanks!colin_oz wrote:Hi Youlean,
Love your product - thanks for making it available.
Quick question on intervals for the various measurements. This is my understanding:
Momentary = 400ms
Short Term = 3s
Integrated = Mean to date
What interval then is Loudness Range calculated over?
Thanks,
Colin
Yes.
Loudness Range is calculate over same range as Integrated.
Website: https://youlean.co/
- KVRAF
- 1959 posts since 21 Sep, 2007 from The Infinite Void
Minor bug in v1.95:
Clicking on the momentary, short term and true peak max values near the bottom left doesn't reset these values as it did previously. Also found a strange intermittent issue where using the scroll wheel to zoom in/out when the follow arrow isn't activated appears to move the visible region to an empty time period (activating follow button resolves this).
Another feature request:
Is it (or will it be) possible to add a "set current as default" function or some way to save user presets.
Win 10 (latest update), 64-bit, Ableton Live 10.
Clicking on the momentary, short term and true peak max values near the bottom left doesn't reset these values as it did previously. Also found a strange intermittent issue where using the scroll wheel to zoom in/out when the follow arrow isn't activated appears to move the visible region to an empty time period (activating follow button resolves this).
Another feature request:
Is it (or will it be) possible to add a "set current as default" function or some way to save user presets.
Win 10 (latest update), 64-bit, Ableton Live 10.
- KVRist
- Topic Starter
- 444 posts since 11 May, 2016 from Serbia
Thanks, I will fix that tomorrow.mutantdog wrote:Minor bug in v1.95:
Clicking on the momentary, short term and true peak max values near the bottom left doesn't reset these values as it did previously. Also found a strange intermittent issue where using the scroll wheel to zoom in/out when the follow arrow isn't activated appears to move the visible region to an empty time period (activating follow button resolves this).
Another feature request:
Is it (or will it be) possible to add a "set current as default" function or some way to save user presets.
Win 10 (latest update), 64-bit, Ableton Live 10.
Yes, it is possible, though I will add that in future updates.
Website: https://youlean.co/