KVR Audio

RPH · Post by **RPH** » Tue Jun 27, 2006 6:07 am

ok,

Made the options the same, and compiled it again :

http://www.rh-modules.nl/Downloads/RH-Booster.rar

Cya,
Rob

what i found on the option i left out :
http://www.uwsg.iu.edu/hypermail/linux/ ... /0388.html

-Compiler supports -mcpu=pentium and -march=pentium
-CONFIG_GCC_PENTIUM
-This enables support to use the -mcpu=pentium and -march=pentium
switches that are available on newer GCC compilers.

-Compiler supports -mcpu=pentiumpro and -march=pentiumpro
-CONFIG_GCC_PENTIUMPRO
-This enables support to use the -mcpu=pentiumpro and march=pentiumpro
-switches that are available on newer GCC compilers. If you use this switch, then your kernel will not run on a Pentium, 486, or 386 processor.

jobromedia · Post by **jobromedia** » Tue Jun 27, 2006 8:31 am

Seriously how good would a synthedit module run ona 486 or a 386? Not that good. So switching to PentiumPro may solve your problem but leave your friends with older computer way behind.

novaflash · Post by **novaflash** » Tue Jun 27, 2006 9:36 am

XGmode wrote:ok,

Made the options the same, and compiled it again :

http://www.rh-modules.nl/Downloads/RH-Booster.rar

same error.

RPH · Post by **RPH** » Tue Jun 27, 2006 2:03 pm

jobromedia wrote:Seriously how good would a synthedit module run ona 486 or a 386? Not that good. So switching to PentiumPro may solve your problem but leave your friends with older computer way behind.

@jobro,

That compiler option is so i can run DEV C++ on a pentium or pentiumpro, not that the module gets compiled with extra flags or so.

@novaflash, thought so..

RPH · Post by **RPH** » Tue Jun 27, 2006 2:23 pm

look the problem is only with RH-Booster, RH-Waveshaper has the same list pin and works fine..so i guess i could try makig a new project, and include everything again and see if it's fine then.

That's the only thing i can think of to fix this stupid problem.

Cya,
Rob.

RPH · Post by **RPH** » Tue Jun 27, 2006 2:40 pm

recompile from a fresh Gain example with my module.cpp and module.h inserted

http://www.rh-modules.nl/Downloads/RH-Booster.rar

RPH · Post by **RPH** » Tue Jun 27, 2006 10:58 pm

Because i love making useless modules

, i've made these :

RH-GUI-Int2Text MidiCC out modules
*NEW* Added 28-june-2006*

input : Int range : 0 - 127
Output: MidiCC names/numbers out of a text pin.

Cya,
Rob.

novaflash · Post by **novaflash** » Wed Jun 28, 2006 3:55 am

XGmode wrote:recompile from a fresh Gain example with my module.cpp and module.h inserted

http://www.rh-modules.nl/Downloads/RH-Booster.rar

don't work.
a strange thing : i've put a screenshot here :
http://www.novaflash.com/beta/polybehavior.png
see polyphony.

Eric.

RPH · Post by **RPH** » Wed Jun 28, 2006 5:26 am

mm,. ok well KDL said he would take a look at the code this weekend. So maybe he can find the problem.

as for the poly: lolz !!
it's because of a property i added, suggested on the SDK usergroup.

IO LINEAR INPUT so downstream modules are not put into poly mode.

If that's wrong, i could remove it..

RPH · Post by **RPH** » Wed Jun 28, 2006 2:58 pm

Subcontrol modules updated :

-ID change and filename change

new module.

RH_I2T-ascii :

Cya,
Rob.

RPH · Post by **RPH** » Thu Jun 29, 2006 10:56 pm

Hi,

My beta module RH_Logic_AND is now RH_Logic_Gates,
i've updated it with a list pin with multiple choices :

Logic Gates : AND,OR,NAND,NOR,XOR,XNOR

Download : Bottompage.

Cya,
Rob.

Edit : added RH_Logic_gates2 with Bool input.

RPH · Post by **RPH** » Fri Jun 30, 2006 7:14 am

novaflash wrote:
don't work.
a strange thing : i've put a screenshot here :
http://www.novaflash.com/beta/polybehavior.png
see polyphony.

Eric.

Hi,

I've removed the Flag from all modules, it was wrong.

If you still got problems with RH-Booster, RH-Waveshaper positive amount is almost the same as Booster.

RPH · Post by **RPH** » Fri Jun 30, 2006 7:33 am

@Novaflash,

Can you load this RH-Booster VST example into cubase ?
made a small change in the code,.

http://www.rh-modules.nl/temp/RH-Booster-vst.rar

cya,
Rob.

novaflash · Post by **novaflash** » Fri Jun 30, 2006 7:43 am

maybe this behavior can help you ?
1st load, error msg.
i quit cubase and relaunch it,
no msg error...

RPH · Post by **RPH** » Fri Jun 30, 2006 7:54 am

well,. at least you can run it now

..think a final fix will be available this weekend.

Cya,
Rob.

RH Synthedit modules thread