The linux DAW thread
-
- KVRian
- 939 posts since 1 Sep, 2010 from Birmingham, UK
Are there any good drum machine plugins for linux? Rather than sample players, I mean.
ZZZzzZZzz..zz....zzzzz
My SoundCloud
My SoundCloud
- KVRAF
- 5687 posts since 11 Feb, 2005 from Bordeaux France
You can't always get what you waaaant...
-
- KVRian
- 939 posts since 1 Sep, 2010 from Birmingham, UK
ahem yes, I have seen that one before, but couldn't get it working, I seem to remember. I'm going to reinstall stuff on my netbook cause it's stopped agreeing with the home network so I'll have another go!
ZZZzzZZzz..zz....zzzzz
My SoundCloud
My SoundCloud
-
- KVRAF
- 9133 posts since 6 Oct, 2004
Hydrogen is great and easy for creating simple or complex percussion,
mousclicks place beats in grid, patterns placed in grid etc.
Using it's ladspa fx interface per drum, can get as crazy
or as esoteric, as your imagination allows
Drumcore, Kitcore, and Addictive drums should work in wine.
Probably Battery too, but I haven't tested it.
There is a free Drumcore, that sounds great for bread&butter
beats augmented with hydrogen creations.
http://www.sonomawireworks.com/drumcore/downloads/
(new hydrogen kits are not difficult, load a kit, replace it's
samples one by one, save it with a new name. Lots of great
free/inexpensive samples out there. I use timemachine to record
individual beats from midi keyboard, chop up the 24 bit beats file
using audacity, and save them to a folder, for selection
in a new hydro kit. You can add thump or tingle etc while you're
at it, using the ladxpa fx, bassboost, chorus, echos yada yada
in audacity.)
Cheers
mousclicks place beats in grid, patterns placed in grid etc.
Using it's ladspa fx interface per drum, can get as crazy
or as esoteric, as your imagination allows
Drumcore, Kitcore, and Addictive drums should work in wine.
Probably Battery too, but I haven't tested it.
There is a free Drumcore, that sounds great for bread&butter
beats augmented with hydrogen creations.
http://www.sonomawireworks.com/drumcore/downloads/
(new hydrogen kits are not difficult, load a kit, replace it's
samples one by one, save it with a new name. Lots of great
free/inexpensive samples out there. I use timemachine to record
individual beats from midi keyboard, chop up the 24 bit beats file
using audacity, and save them to a folder, for selection
in a new hydro kit. You can add thump or tingle etc while you're
at it, using the ladxpa fx, bassboost, chorus, echos yada yada
in audacity.)
Cheers
Last edited by glokraw on Sun Oct 28, 2012 6:29 pm, edited 1 time in total.
-
- KVRian
- 939 posts since 1 Sep, 2010 from Birmingham, UK
I was thinking more 808 / 909 type drum synths rather than sample players. Its just for something portable when out and about, to go in renoise.
ZZZzzZZzz..zz....zzzzz
My SoundCloud
My SoundCloud
-
- KVRAF
- 9133 posts since 6 Oct, 2004
There are several Roland kits in Hydrogen collection,
808, 809, 606, 626 etc
I'll guess most windows drumsynths that are just .dll files,
will work in wine, but I don't know how renoise deals with
qjackctl connections from reaper, festige, fst, dssi-vst.
Cheers
808, 809, 606, 626 etc
I'll guess most windows drumsynths that are just .dll files,
will work in wine, but I don't know how renoise deals with
qjackctl connections from reaper, festige, fst, dssi-vst.
Cheers
- KVRist
- 165 posts since 10 Nov, 2003
There's one called "smack" (http://smack.berlios.de/) but it needs to be compiled. I'm going to try building it at some point.kx.001 wrote:Are there any good drum machine plugins for linux? Rather than sample players, I mean.
-
- KVRist
- 78 posts since 18 Aug, 2007
Brian, you are partially correct. The source code for the Linux and all open-source applications it uses must be made available, but the maker may also write and include proprietary software as well (a proprietary vst host for example). The presence of Linux doesn't guarantee that everything is open-source..... Google's Android OS (which is actually a Java VM running on Linux) is one example of thisbriandc wrote:Yep. That means that they don't need to purchase special licenses in order to build their machines.glokraw wrote:http://au.fairlight.com.au/product/quantum/technical/
More of a high-end linux-vst solution:
"Built-in embedded Linux PC"
Nice barrel of winE under the hood
Of course, their source code should also be available to all..
brian
- KVRist
- 165 posts since 10 Nov, 2003
I looked at "smack" again and saw that it's not a plugin. Sorry for the misinformation.logicgate wrote:There's one called "smack" (http://smack.berlios.de/) but it needs to be compiled. I'm going to try building it at some point.kx.001 wrote:Are there any good drum machine plugins for linux? Rather than sample players, I mean.
-
- KVRist
- 292 posts since 25 Jun, 2012 from Earth
I stand corrected.SE_Newbie wrote:
Brian, you are partially correct. The source code for the Linux and all open-source applications it uses must be made available, but the maker may also write and include proprietary software as well (a proprietary vst host for example). The presence of Linux doesn't guarantee that everything is open-source..... Google's Android OS (which is actually a Java VM running on Linux) is one example of this
I'm just anxious to see everyone move closer to open-source and freeware. It's so nice to share!
Besides, that's how new ideas come along..from others who did things before us.
brian
-
- KVRAF
- 9133 posts since 6 Oct, 2004
http://sourceforge.net/projects/dssi/files/hexter/
http://dssi.sourceforge.net/hexter.html
"2012/11/1: hexter celebrates its eighth birthday with an integrated patch editor and a version 1.0.0 designation. Also included are more patch loading enhancements, NRPN parameter mapping, and the option to use floating-point math in the synthesis code instead of fixed-point."
Yamaha DX7 sysex 'rompler', now has patch editing, a great addition to linux users
who want to design/modify sounds! Run a few instances, each with different
rakarrack fx
http://dssi.sourceforge.net/hexter.html
"2012/11/1: hexter celebrates its eighth birthday with an integrated patch editor and a version 1.0.0 designation. Also included are more patch loading enhancements, NRPN parameter mapping, and the option to use floating-point math in the synthesis code instead of fixed-point."
Yamaha DX7 sysex 'rompler', now has patch editing, a great addition to linux users
who want to design/modify sounds! Run a few instances, each with different
rakarrack fx
-
- KVRist
- 292 posts since 25 Jun, 2012 from Earth
COOOL! I was really "worried" that patch editing would never be added, but this is more than I expected. There are tons of patches for this thing, I guess that people have "donated" directly from their DX7s, and you can find them here:glokraw wrote:http://sourceforge.net/projects/dssi/files/hexter/
http://dssi.sourceforge.net/hexter.html
"2012/11/1: hexter celebrates its eighth birthday with an integrated patch editor and a version 1.0.0 designation. Also included are more patch loading enhancements, NRPN parameter mapping, and the option to use floating-point math in the synthesis code instead of fixed-point."
Yamaha DX7 sysex 'rompler', now has patch editing, a great addition to linux users
who want to design/modify sounds! Run a few instances, each with different
rakarrack fx
http://linuxmusicians.com/viewtopic.php?f=19&t=7858
Enjoy!!
brian
-
- KVRAF
- 9133 posts since 6 Oct, 2004
Here are the editing choices in the new version linux Hexter 1.0x, the sysex loading DX7 rompler, that now has lots of editing features. Sean Bolton has been hard at work!
Performance Tab:
pitchbend
portamento time
modwheel sensitivity
modwheel assign p, a, or e
foot sensitivity
foot assign p, a, or e
pressure sensitivity
pressure assign p, a, or e
breath sensitivity
breath assign p, a, or e
send test note, with key and velocity sliders
Edit Menu-->Edit Patch page:
widget to see and select 32 algos
widget for 7 levels of feedback
6 operators, each with
Frequency Mode, Coarse, Fine, Detune
OL widget, 0-99 for each of 6 operators
Envelope Curve, left/right -Lin -Exp +Lin +Exp
Level Scaling Breakpoint, Rate Scaling
Discard changes button or save changes into patchbank button
Four stage envelopes and gui for both rate and level
Velocity and Amp Mod sensitivity
Global operator page with
Transpose
Osc Key Sync
Speed, delay, PMD, AMD
Wave selector, Tri, Saw+ Saw- Square Sine S/H with Sync and PMS 1-7 range
Four stage pitch envelopes for both rate and level, 0-99 range, with gui
Editor Mode: optional old school numeric display.
Configuration tab:
Tuning
Volume (db)
polyphany (instance) 1-64
polyphony (global) 1-64
monophonic mode off, on, once, both
disable LFO/Mod/Perf (0.5x compatibility) on/off
sysex channel receive 1-16
---------------------------------------------------------------------------
Each instance shows 2% cpu use on old amd dual core, (1900 each)
probably wouldn't even blip an i7, so massive amounts of the Deckard
sysex files collection could be played at once, using multiple instances.
deckard.zip is found here, scroll down to patches section,
as well as other sources and DX7 infos:
http://homepages.abdn.ac.uk/mth192/pages/html/dx7.html
Hexter paired and routed willynilly to multiple rakarrack multi-fx,
is crazy sonic goodness.
Performance Tab:
pitchbend
portamento time
modwheel sensitivity
modwheel assign p, a, or e
foot sensitivity
foot assign p, a, or e
pressure sensitivity
pressure assign p, a, or e
breath sensitivity
breath assign p, a, or e
send test note, with key and velocity sliders
Edit Menu-->Edit Patch page:
widget to see and select 32 algos
widget for 7 levels of feedback
6 operators, each with
Frequency Mode, Coarse, Fine, Detune
OL widget, 0-99 for each of 6 operators
Envelope Curve, left/right -Lin -Exp +Lin +Exp
Level Scaling Breakpoint, Rate Scaling
Discard changes button or save changes into patchbank button
Four stage envelopes and gui for both rate and level
Velocity and Amp Mod sensitivity
Global operator page with
Transpose
Osc Key Sync
Speed, delay, PMD, AMD
Wave selector, Tri, Saw+ Saw- Square Sine S/H with Sync and PMS 1-7 range
Four stage pitch envelopes for both rate and level, 0-99 range, with gui
Editor Mode: optional old school numeric display.
Configuration tab:
Tuning
Volume (db)
polyphany (instance) 1-64
polyphony (global) 1-64
monophonic mode off, on, once, both
disable LFO/Mod/Perf (0.5x compatibility) on/off
sysex channel receive 1-16
---------------------------------------------------------------------------
Each instance shows 2% cpu use on old amd dual core, (1900 each)
probably wouldn't even blip an i7, so massive amounts of the Deckard
sysex files collection could be played at once, using multiple instances.
deckard.zip is found here, scroll down to patches section,
as well as other sources and DX7 infos:
http://homepages.abdn.ac.uk/mth192/pages/html/dx7.html
Hexter paired and routed willynilly to multiple rakarrack multi-fx,
is crazy sonic goodness.
-
- KVRian
- 508 posts since 9 Feb, 2012
Hi all,
For those interested in DAWs, synthesizers, samplers, and effects for Linux, I've released a full suite of them with my new project 'PyDAW', you can check them out here:
http://www.kvraudio.com/product/pydaw-by-libmodsynth
http://sourceforge.net/projects/libmodsynth/
It's designed specifically for people producing MIDI-based electronic music with instrument/effect plugins(if you're recording a band, you're probably better off with something else).
About each component:
PyDAW: A unique take on the DAW concept, taking a very pattern-based approach, somewhere between DAW, tracker and drum machine. Features offline rendering(a rarity in Linux DAWs), strong multi-core CPU support, high accuracy audio/MIDI engine with sample-accurate MIDI timing.
Euphoria: A sampler with modular effects, somewhat inspired by Kontakt, but without all of the endless clicking/scrolling/unfolding/folding that makes me hate Kontakt
. Euphoria is suitable for both drums and instruments.
Ray-V: Retro analog-style synthesizer, you've seen the type before...
Modulex: A modular multieffect unit currently featuring 16 different effects, with more planned
The project is moving quickly, I was writing the first lines of code just 11 months ago, and now the entire stack is finally stable and usable. I'm planning on finishing a couple more major features of the DAW component, then I'll start adding more and different types of plugin instruments and effects...
For those interested in DAWs, synthesizers, samplers, and effects for Linux, I've released a full suite of them with my new project 'PyDAW', you can check them out here:
http://www.kvraudio.com/product/pydaw-by-libmodsynth
http://sourceforge.net/projects/libmodsynth/
It's designed specifically for people producing MIDI-based electronic music with instrument/effect plugins(if you're recording a band, you're probably better off with something else).
About each component:
PyDAW: A unique take on the DAW concept, taking a very pattern-based approach, somewhere between DAW, tracker and drum machine. Features offline rendering(a rarity in Linux DAWs), strong multi-core CPU support, high accuracy audio/MIDI engine with sample-accurate MIDI timing.
Euphoria: A sampler with modular effects, somewhat inspired by Kontakt, but without all of the endless clicking/scrolling/unfolding/folding that makes me hate Kontakt
. Euphoria is suitable for both drums and instruments.
Ray-V: Retro analog-style synthesizer, you've seen the type before...
Modulex: A modular multieffect unit currently featuring 16 different effects, with more planned
The project is moving quickly, I was writing the first lines of code just 11 months ago, and now the entire stack is finally stable and usable. I'm planning on finishing a couple more major features of the DAW component, then I'll start adding more and different types of plugin instruments and effects...
-
- KVRAF
- 9133 posts since 6 Oct, 2004
http://www.kvraudio.com/product/pydaw-by-libmodsynth
http://sourceforge.net/projects/libmodsynth/
Thats an impressive project you have going
And a .deb package at the web page is a nice touch,
since musicians often must compile new software releases,
and some of them are just drummers with a guitar in the corner
Thanks for sharing your hard work!
http://sourceforge.net/projects/libmodsynth/
Thats an impressive project you have going
And a .deb package at the web page is a nice touch,
since musicians often must compile new software releases,
and some of them are just drummers with a guitar in the corner
Thanks for sharing your hard work!