Arturia MiniFuse1 and Beyerdynamic DT 880 250 Ohm
- KVRAF
- Topic Starter
- 4970 posts since 26 Apr, 2007 from Noosphere
Hi. Does anyone have this combo? Does the Minifuse1 nicely drives the 250 Ohm DT 880? Also, i have connected my FLKey Mini to MiniFuse1 USB port. Thank you.
- KVRAF
- Topic Starter
- 4970 posts since 26 Apr, 2007 from Noosphere
Now I got this headphones and have to crank the MiniFuse to the max to hear it ok. So this inteface is not suitable for such cans, as this might lower the quality. I have to search for higher impedance interface now.
- KVRAF
- 15280 posts since 8 Mar, 2005 from Utrecht, Holland
You could have known... Page 38:
https://dl.arturia.net/products/minifus ... 0_0_EN.pdf
According to my calculations it provides a dinky 18mW into 250Ω.
(137mW into 33Ω gives 2.13V which into 250Ω is 8.5mA and thus 18mW)
NB: a matching impedance isn't all you need. My interface provides enough juice, but it has clearly audible harmonic distortion. Just consider getting a decent headphone amp for your cans to solve this once and for always.
https://dl.arturia.net/products/minifus ... 0_0_EN.pdf
According to my calculations it provides a dinky 18mW into 250Ω.
(137mW into 33Ω gives 2.13V which into 250Ω is 8.5mA and thus 18mW)
NB: a matching impedance isn't all you need. My interface provides enough juice, but it has clearly audible harmonic distortion. Just consider getting a decent headphone amp for your cans to solve this once and for always.
We are the KVR collective. Resistance is futile. You will be assimilated.
My MusicCalc is served over https!!
My MusicCalc is served over https!!
-
- KVRist
- 88 posts since 20 Mar, 2016
I have the the Audient iD14 and those headphones and the output is fine.
Windows/Mac | Studio One, Live, Logic | Push 2, Maschine MKIII, Atom SQ | Presonus Quantum 2, Focusrite Scarlett 2i4, | Fender, Godin, Taylor
- KVRAF
- Topic Starter
- 4970 posts since 26 Apr, 2007 from Noosphere
Thanks for the reassurance. (As I'm still waiting for the new device).