M-Audio Oxygen 25 - Script help - SOLVED
-
- KVRist
- Topic Starter
- 51 posts since 7 Apr, 2014
Hi
I have rencenty purchased Bitwig and a M-audio25, the keys and pitch work on the generic controller setting, but nothing else!
Does anyone know how I can get everything working ?
I have rencenty purchased Bitwig and a M-audio25, the keys and pitch work on the generic controller setting, but nothing else!
Does anyone know how I can get everything working ?
Last edited by tektris on Tue Oct 21, 2014 6:23 pm, edited 2 times in total.
-
- KVRAF
- 3071 posts since 29 Sep, 2005
There is a script for the O25 at github. Have you tried it?
https://github.com/Normalised/bitwig-control-scripts
Happy Musiking!
dsan
https://github.com/Normalised/bitwig-control-scripts
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRist
- Topic Starter
- 51 posts since 7 Apr, 2014
Thankyou!
My next question is there a step by step on how to install it?
The instructions are not making much sense to me :-/
It mentions Korg nanoKONTROL v1 and setting scenes. - I dont quite understand what I need to do!
I'm completely new to Bigwig , If anyone can explain to me the steps to get the scrip working I'd be really grateful!
Thanks again!
My next question is there a step by step on how to install it?
The instructions are not making much sense to me :-/
It mentions Korg nanoKONTROL v1 and setting scenes. - I dont quite understand what I need to do!
I'm completely new to Bigwig , If anyone can explain to me the steps to get the scrip working I'd be really grateful!
Thanks again!
-
- KVRAF
- 3071 posts since 29 Sep, 2005
How to install:
http://www.bitwig.com/en/community/installation_guide
Close BWS and install to the described location.
Reopen BWS, go to Options/Preferences/Controllers.
On this tab: If your controller is not automatically detected you will have to "Add controller manually".
It should be in your list of available controllers. From there, assign the proper ins/outs and you should be good to go.
HTH
Happy Musiking!
dsan
http://www.bitwig.com/en/community/installation_guide
Close BWS and install to the described location.
Reopen BWS, go to Options/Preferences/Controllers.
On this tab: If your controller is not automatically detected you will have to "Add controller manually".
It should be in your list of available controllers. From there, assign the proper ins/outs and you should be good to go.
HTH
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRAF
- 3071 posts since 29 Sep, 2005
I also suggest reading the sticky threads at the start of the forum:
http://www.kvraudio.com/forum/viewtopic ... 9&t=407092
http://www.kvraudio.com/forum/viewtopic ... 9&t=406759
I know it is a lot of reading but there is a vast wealth of information that is particularly useful to newcomers to BWS.
There's also a LOT of information contained in the posted threads that will help you get through the initial struggles of BWS.
And, there's a lot of videos that are useful:
http://www.youtube.com/user/bitwig
It gets easier as you go along.
HTH
Happy Musiking!
dsan
http://www.kvraudio.com/forum/viewtopic ... 9&t=407092
http://www.kvraudio.com/forum/viewtopic ... 9&t=406759
I know it is a lot of reading but there is a vast wealth of information that is particularly useful to newcomers to BWS.
There's also a LOT of information contained in the posted threads that will help you get through the initial struggles of BWS.
And, there's a lot of videos that are useful:
http://www.youtube.com/user/bitwig
It gets easier as you go along.
HTH
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRAF
- 3071 posts since 29 Sep, 2005
Sorry the delay....got saddled with some honey do's.
The folder structure should be C:/Users/[Your user name]/Documents/Bitwig Studio/Controller Scripts/M-Audio
Drop the script into the M-Audio folder and BWS should recognize it.
HTH
Happy Musiking!
dsan
The folder structure should be C:/Users/[Your user name]/Documents/Bitwig Studio/Controller Scripts/M-Audio
Drop the script into the M-Audio folder and BWS should recognize it.
HTH
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRist
- Topic Starter
- 51 posts since 7 Apr, 2014
Hi dsan!
Thanks for your help so far... I have everything in the correct folder structure with the M-Audio folder and still it doesn't show in the listings.
I've checked a few times and I can't see that I'm doing anything different to the instructions.
:-/
Thanks for your help so far... I have everything in the correct folder structure with the M-Audio folder and still it doesn't show in the listings.
I've checked a few times and I can't see that I'm doing anything different to the instructions.
:-/
-
- KVRAF
- 3071 posts since 29 Sep, 2005
I just noticed....the folder named M-Audio is lower case in my structure.
Try making the folder M-Audio into m-audio.
Also - did you already have a script for the Oxygen 25? If so, and BWS did not first recognize it, it assumes another script by that name is the same as the first.
If you had a previous script:
Close BWS.
Delete the previous script.
Open BWS.
Close BWS.
Put the new script in the folder.
Open BWS.
Go through the pref sequence as previously described.
Hopefully that will do the trick.
If not then save the script here:
C:program Files (x86)/Bitwig Studio/resources/controllers/m-audio
It shouldn't be this location though as I think this location is reserved for the scripts created by Team BWS.
HTH
Happy Musiking!
dsan
Try making the folder M-Audio into m-audio.
Also - did you already have a script for the Oxygen 25? If so, and BWS did not first recognize it, it assumes another script by that name is the same as the first.
If you had a previous script:
Close BWS.
Delete the previous script.
Open BWS.
Close BWS.
Put the new script in the folder.
Open BWS.
Go through the pref sequence as previously described.
Hopefully that will do the trick.
If not then save the script here:
C:program Files (x86)/Bitwig Studio/resources/controllers/m-audio
It shouldn't be this location though as I think this location is reserved for the scripts created by Team BWS.
HTH
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRAF
- 3071 posts since 29 Sep, 2005
No, I don't think so, too many others using it without problem.
Here is a different script to try:
https://github.com/ntrval/bitwig_oxygen25_w8knobs
Hopefully it will work or maybe Tom will drop by here to give you some other ideas to try.
Maybe change your thread title to include UNSOLVED. This will be a flag to others.
Be sure to change it to SOLVED if you get resolution
Sorry I can't be more helpful.
Happy Musiking!
dsan
Here is a different script to try:
https://github.com/ntrval/bitwig_oxygen25_w8knobs
Hopefully it will work or maybe Tom will drop by here to give you some other ideas to try.
Maybe change your thread title to include UNSOLVED. This will be a flag to others.
Be sure to change it to SOLVED if you get resolution
Sorry I can't be more helpful.
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRist
- Topic Starter
- 51 posts since 7 Apr, 2014
Hi dsan
You have been more than helpful - Thankyou!
Tired the other script and still no joy!
Should the m-audio folder show up in bitwig after I place it here C:\Users\$$$$$$\Documents\Bitwig Studio\Controller Scripts?
Does anyone else have any idea?
I'm running windows 8.1
You have been more than helpful - Thankyou!
Tired the other script and still no joy!
Should the m-audio folder show up in bitwig after I place it here C:\Users\$$$$$$\Documents\Bitwig Studio\Controller Scripts?
Does anyone else have any idea?
I'm running windows 8.1
-
- KVRist
- Topic Starter
- 51 posts since 7 Apr, 2014
tektris wrote:Hi dsan
You have been more than helpful - Thankyou!
Tried the other script and still no joy!
Should the m-audio folder show up in bitwig after I place it here C:\Users\$$$$$$\Documents\Bitwig Studio\Controller Scripts?
Does anyone else have any idea?
I'm running windows 8.1
-
- KVRAF
- 3071 posts since 29 Sep, 2005
That is the correct spot for user added controller scripts.
Inside BWS you should see m-audio when you click on "Add controller manually" on the Controller tab in preferences.
The only other reason I can think of it is not showing up is if it is not named with ".js" at the end. Can you confirm it is named accurately?
I'm going to try to point Thomas in this direction. Maybe he has some ideas.
HTH
Happy Musiking!
dsan
Inside BWS you should see m-audio when you click on "Add controller manually" on the Controller tab in preferences.
The only other reason I can think of it is not showing up is if it is not named with ".js" at the end. Can you confirm it is named accurately?
I'm going to try to point Thomas in this direction. Maybe he has some ideas.
HTH
Happy Musiking!
dsan
My DAW System:
W7, i5, x64, 8Gb Ram, Edirol FA-101
W7, i5, x64, 8Gb Ram, Edirol FA-101
-
- KVRist
- Topic Starter
- 51 posts since 7 Apr, 2014
The orginal file is named "Oxygen25.control" (with a java icon)
I have tried chaning to "Oxygen25.control.js" - Doesnt work
I have also tried changing to "Oxygen25.js" - Doesnt work
I have tried chaning to "Oxygen25.control.js" - Doesnt work
I have also tried changing to "Oxygen25.js" - Doesnt work