Bug reports
-
- KVRian
- 1356 posts since 21 Sep, 2013 from California
Attempting to use the Structure to set up a song in Ver 3.02 64 bit.
This has got to be the most frustrating thing. Not only do the lines jump around when I'm trying to add, (I click on the line to get the +/- and it jumps to the prior section. Really annoying) but the whole thing crashes after I have about 5 parts in.
Hopefully this can be fixed. Otherwise, I will just go back to doing parts at a time. Which actually isn't a bad way to go as each part will match.
Thanks
Ah! Looks like a missed an update. It seems to be working in v3.04. I thought I checked. Guess not.
This has got to be the most frustrating thing. Not only do the lines jump around when I'm trying to add, (I click on the line to get the +/- and it jumps to the prior section. Really annoying) but the whole thing crashes after I have about 5 parts in.
Hopefully this can be fixed. Otherwise, I will just go back to doing parts at a time. Which actually isn't a bad way to go as each part will match.
Thanks
Ah! Looks like a missed an update. It seems to be working in v3.04. I thought I checked. Guess not.
-
- KVRer
- 10 posts since 3 Feb, 2014
I too find the jumping of notes distracting. I know it adjusts the zoom level and moves the notes to the fitting note like with a magnet tool. But I'd rather scroll and zoom myself than have difficulties placing the parts because everything jumps around.
I also encountered a bug several times when moving generators or fixed parts. Especially the bass line in this test project of mine has problems. When I move a part, the whole bass track suddenly is gray. Then when moving more, it appears again. Sometimes notes in the bass track just disappear and you cannot see them. Editing this way is impossible I have to save the project, close Rapid Composer, and open it again, then most of the time notes appear again. Until after a few minutes of editing, same thing happens. This happens in 3.04 and 3.1 beta10, so in all the latest versions.
I also encountered a bug several times when moving generators or fixed parts. Especially the bass line in this test project of mine has problems. When I move a part, the whole bass track suddenly is gray. Then when moving more, it appears again. Sometimes notes in the bass track just disappear and you cannot see them. Editing this way is impossible I have to save the project, close Rapid Composer, and open it again, then most of the time notes appear again. Until after a few minutes of editing, same thing happens. This happens in 3.04 and 3.1 beta10, so in all the latest versions.
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5435 posts since 9 Jan, 2010
This is weird, thank you for reporting!
The notes are there, just the zoom changes in the bass track. I try to reproduce it by setting up a similar composition.
Thank you!
Attila
The notes are there, just the zoom changes in the bass track. I try to reproduce it by setting up a similar composition.
Thank you!
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
-
- KVRer
- 10 posts since 3 Feb, 2014
I can also send you my project if you like. Because I don't know what's causing this. I tried reproducing with a fresh project and it didn't work all the time. Maybe it has to do with part variations or something that accumulates over time when working with a project. Let me know, I can upload it to you or send it via email.
Thanks for looking into it.
Thanks for looking into it.
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5435 posts since 9 Jan, 2010
Hi Chris,
That would be wonderful if you could send me that project to info at musicdevelopments dot com.
It would make fixing this bug much easier and faster.
Thanks,
Attila
That would be wonderful if you could send me that project to info at musicdevelopments dot com.
It would make fixing this bug much easier and faster.
Thanks,
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
-
- KVRer
- 10 posts since 3 Feb, 2014
Thanks for the fix in Beta12! Bass now behaves nicely. I found other bugs for you though
I cannot open RC files by double clicking. RC spits out an error message. Only when opening through the music menu it works.
---
Scrolling with the mouse wheel works in tracks, but not for the project window. I cannot scroll tracks up and down as I would assume. I need to drag the scrollbar on the right. It would be nice if I could use the mouse wheel once I'm out of a track and in an empty sections of the project window.
https://dl.dropboxusercontent.com/u/841 ... ollbar.mp4
---
When playing, I always modify things to see how they sound on the fly. But any little change I do in RC lets all MIDI notes hang all the time. Even when I only move the Expression slider on the left in the track, notes start to hang. It would be nice if I could modify values and move parts up and down without having to stop first or notes hang. Right now, the panic button is my best friend. I always have to push it.
https://dl.dropboxusercontent.com/u/841 ... teHang.mp4
PS: For some reason KVR Forums don't embed a video file and only play audio instead. You have to copy and paste the URL to watch the video. Sorry about that. Is there any way I can embed a video file? Does anybody know?
I cannot open RC files by double clicking. RC spits out an error message. Only when opening through the music menu it works.
---
Scrolling with the mouse wheel works in tracks, but not for the project window. I cannot scroll tracks up and down as I would assume. I need to drag the scrollbar on the right. It would be nice if I could use the mouse wheel once I'm out of a track and in an empty sections of the project window.
https://dl.dropboxusercontent.com/u/841 ... ollbar.mp4
---
When playing, I always modify things to see how they sound on the fly. But any little change I do in RC lets all MIDI notes hang all the time. Even when I only move the Expression slider on the left in the track, notes start to hang. It would be nice if I could modify values and move parts up and down without having to stop first or notes hang. Right now, the panic button is my best friend. I always have to push it.
https://dl.dropboxusercontent.com/u/841 ... teHang.mp4
PS: For some reason KVR Forums don't embed a video file and only play audio instead. You have to copy and paste the URL to watch the video. Sorry about that. Is there any way I can embed a video file? Does anybody know?
-
- KVRist
- 46 posts since 21 Mar, 2009 from Germany
Hi Attila,
I think I found a small bug with the master track. When I start a new composition I always get 16/X, shouldn't it be 4/X? Can I change that somewhere? (But that's not the bug, only a minor thing)
When I now change it manually, the master track does not update immediately and automatically. I have to grab and drag the handle at the very right side to have it updated.
Pic.1 - new composition started
Pic.2 - 16/X changed to 4/X, master track does not change
Pic. 3 - dragged the handle on the right end, master track updated
I think I found a small bug with the master track. When I start a new composition I always get 16/X, shouldn't it be 4/X? Can I change that somewhere? (But that's not the bug, only a minor thing)
When I now change it manually, the master track does not update immediately and automatically. I have to grab and drag the handle at the very right side to have it updated.
Pic.1 - new composition started
Pic.2 - 16/X changed to 4/X, master track does not change
Pic. 3 - dragged the handle on the right end, master track updated
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5435 posts since 9 Jan, 2010
Hi Max,
yes, the master track did not update, this was fixed today.
For new compositions you can set the default 'beats per bar' value under Settings / Miscellaneous. Look for "New Composition", "Default Beats Per Bar".
Thanks,
Attila
yes, the master track did not update, this was fixed today.
For new compositions you can set the default 'beats per bar' value under Settings / Miscellaneous. Look for "New Composition", "Default Beats Per Bar".
Thanks,
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5435 posts since 9 Jan, 2010
Hi Chris,
double-clicking on an .rcCOMP file works now. It will open the composition as expected from a well-behaving app (both on OS X and Windows).
I'll fix the other issues shortly. The hanging note bug is really annoying but not easy to fix.
Thanks,
Attila
double-clicking on an .rcCOMP file works now. It will open the composition as expected from a well-behaving app (both on OS X and Windows).
I'll fix the other issues shortly. The hanging note bug is really annoying but not easy to fix.
Thanks,
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
- KVRAF
- 1626 posts since 21 Sep, 2007 from USA
In the Phrase Editor, the undo function seems to be a bit too aggressive sometimes.
For example, If I create a simple phrase; lasso select all of the notes; press ctrl+c to copy to clipboard; move the cursor forward; press ctrl+v to paste from clipboard; move the cursor forward; press ctrl+v to paste from clipboard; move the cursor forward; press ctrl+v to paste from clipboard; press ctrl+z to undo...
The result is the phrase is returned back to the moment after the penultimate note was created, just before the last note was created and then followed by the lasso select. [please see animated gif below]
What I expect, is the undo should return the phrase back to the moment before the last paste from clipboard.
It seems as if the clipboard operations were left out of the undo stack.
For example, If I create a simple phrase; lasso select all of the notes; press ctrl+c to copy to clipboard; move the cursor forward; press ctrl+v to paste from clipboard; move the cursor forward; press ctrl+v to paste from clipboard; move the cursor forward; press ctrl+v to paste from clipboard; press ctrl+z to undo...
The result is the phrase is returned back to the moment after the penultimate note was created, just before the last note was created and then followed by the lasso select. [please see animated gif below]
What I expect, is the undo should return the phrase back to the moment before the last paste from clipboard.
It seems as if the clipboard operations were left out of the undo stack.
[Core i7 8700 | 32GB DDR4 | Win11 x64 | Studio One 6 Pro | FL Studio ASIO/WASAPI ]
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5435 posts since 9 Jan, 2010
Exactlytonedef71 wrote:It seems as if the clipboard operations were left out of the undo stack.
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
- KVRAF
- 1626 posts since 21 Sep, 2007 from USA
In the Phrase Editor, cut & paste stops working properly after the play button has been pressed.
For example, if I create a simple phrase; click the play button to audition the phrase; lasso select the notes; press ctrl+c to copy to clipboard; press ctrl+v to paste from clipboard; advance the cursor forward; press ctrl+v to paste from clipboard; advance the cursor forward; press ctrl+v to paste from clipboard ...
I expect to see a total of four copies of the phrase (the original plus three copies). Instead, I see the original and just one copy, because the paste from clipboard has stopped working after the first paste. [please see video demonstration below]
Usually at this point, the cut & paste from clipboard functionality degrades (pasting into the phrase stops working altogether).
I have verified that this problem starts happening after the play button has been clicked.
For example, if I create a simple phrase; click the play button to audition the phrase; lasso select the notes; press ctrl+c to copy to clipboard; press ctrl+v to paste from clipboard; advance the cursor forward; press ctrl+v to paste from clipboard; advance the cursor forward; press ctrl+v to paste from clipboard ...
I expect to see a total of four copies of the phrase (the original plus three copies). Instead, I see the original and just one copy, because the paste from clipboard has stopped working after the first paste. [please see video demonstration below]
Usually at this point, the cut & paste from clipboard functionality degrades (pasting into the phrase stops working altogether).
I have verified that this problem starts happening after the play button has been clicked.
[Core i7 8700 | 32GB DDR4 | Win11 x64 | Studio One 6 Pro | FL Studio ASIO/WASAPI ]
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5435 posts since 9 Jan, 2010
Hi Tony,
both of these bugs are fixed now.
Thank you for reporting them!
Next beta version will be available in about 3-4 days.
Attila
both of these bugs are fixed now.
Thank you for reporting them!
Next beta version will be available in about 3-4 days.
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!