FX

1. Analyzer (How to analyze the sound, and see what the sound do and what sounds best, and what it does, basicly how it works).

2. FL xy controller (What it does, and how it works, basicly i wana learn how to edit the filter or eq with it like spyro benassi).

3. Compressor (What does an compressor do and what are the knobs doing, wana know more about the compression, and what it does to the sound).

4. Filter (Watched warbeats tutorial and im intrested in knowing more about how the filter changes the sound, and what the diffrent filter types do, and how it changes the sound).

5. Reverb (What the knobs doing and also what sounds best to the sound and how you can know this, also how to get the benassi effect on the reverb., and also how to know how this sounds best, basicly how to link it to the peak and do the reverb effect and how to do this perfect).

6. Delay (Wana know some of the functions and what the knobs doing more, And wana know more about when you do use delay, for example voices basses and when its good to use it).

7. Eq (Wana know more about the eq and how to use it perfect and how to change the bass and res freq best, basicly wana know more about how to get the sound fitting togheter and whats best for example if i have an kick and bass, if the kick is heavy you need to eq away the bass of the bass some, and i wana leanr more about this, how to get the sound better if anyone knows).

8. Mute (Basicly what is mute and when do i use mute, And what does it do, also how to mute kick so it sounds bouncy to the sound, Hoe anyone knows how to do this).

9. Limiter (wana know more about limiter and what it does also how the compressor works to the sound, And what the functions is doing to the sound, Also the sidechain effect of it, How to sidechain perfect and how to know how the sidechain should be done to the sound to sound good, And also what the knobs are doing).

10. Peak controller (I have read some of the peak controller and dident understand all the part, it says the base is doing base of the controller but when i change the base of it the sound disapair, and also what the knnobs doing to the peak controller and when to use it, Also i know you can do the sidechain effect here and why do i do it in peak when i can do it in limiter real sidechaining? Also wana know more about linking reverb to peak and how to do this perfect and how do i do the benassi effect here of the reverb? And how do i i changes the knob to do the reverb effect and what it does to the sound and what the knnobs are doing).

11. Stereo enhancer (what does it do and how to use it and when do i use it and what does the knobs doing, i do understand it makes sound stereo).

12. Soft clipper (What does it do to the sound and why use this, and also what is it used for?).

13. Vocoder (What does vocoder do i dont understand this at all, and when do i use it i do understand i use it for voices, But what do it do to the sound and what can i do to the voice?).

14. Autotune effect G-snap (What does it do to the voices and what the diffrent knobs are doing also how do i know it fit the voice and changes it right? also the effect of it makes the pitch changes right?).

15. Flanger/Phaser (Also if some one could explain more what they do to the sound i think it multiply the sound right? Some way it makes the sound realy good for leads, mybe some one knows when to use this aswell and what it can be used for, mybe some one could explain what thek nobs do aswell?).

16. Waveshaper (When do i use this and what does it do to the sound aswell?)

Thats basicly everything and thnx for taking your time reading this.

im guessing based on the names that you are after specific FL Studio advice, and theres WAY too much to go into in one post. Quite a few of the questions are handled by the FL Help so give it a read.. oh and you'll get better FL specific answers on the Image Line forum.
http://forum.image-line.com/

Dang - that's alot of questions. I'll answer one. Firtsly - I'd recommend never to use a frequency analyzer! It makes people lazy - you should listen - not look! If there is a frequency that bothers you in a sound - use a search method - i.e - take a single EQ band and put the Q(sometimes called resonance) on high(sharp) - now push the gain up as far as possible - and sweep though all the frequencies until you find that annoying frequency - now just EQ it out. Also about Q(resonance) - use less Q when boosting frequencies - and higher Q when cutting. Also - music is about balance - if you would like more bass on an bass instrument - rather consider cutting bass on another instrument - rather than adding bass. Every instrument needs it's own space - it's commonly called - frequency seperation. Only boost frequencies if you really have to. Lastly - you should ALWAYS eq with all instruments playing if possible. The "solo button" is not your friend.


Hope that helps a bit.

Andrew

Don't mean to be rude at all here, but there's way too much substance & interrogations to answer in a one forum post. I suggest you to start with the basics, which seem to really lack by the look of your questions, dive into your DAW manual to get the basic concepts of audio plugins and search on different music production websites. These subjects are very easy to find on the web and they're often discussed & explained with lot of detail and tutorials as well.

ok thnx for the response still. Il try to find on youtube and see if i can find anything

OP is a just a list of audio terms asking "Please define this as it relates to Benassi."
Is it rude to say rtfm? Do people still say that? Do people still do that?
Not that it would necessarily apply or help, but it is the proper response.

Very very often you will find out what the knobs do by reading the documentation that comes with the device.
What does it sounds like? Listening is a good source for that information.

How to 'do it perfect', well thats why forums like this are so popular...

Read the knobs and the beginner info on the image line forums.

If you have a license for FL studio you should be able to access the forums.

You've basically put up a single forum post asking how to become an audio engineer. It will take you a lot of study and practice. Break it down and learn one thing at a time. It won't be easy---you'll have to dedicate yourself to the process of learning.

Wow... yeah it IS rude to say that. If that's all you have to say to someone, why bother? Crap like that only does one of two things. Pisses them off, or makes them feel stupid. In this case, the OP doesn't seem to deserve either.

He did ask for an explanation of what basically every single effect type does (at least the major ones). That was asking a lot.

unless , of course , you happen to be familiar w/ the OP , and his posting history ,
in which case , you are shoving your fist down your throat in a failed attempt to stifle
a screaming response of RTFM ...

makes me long for the days of the ' Siberia ' threads ...

Experiment...

The OP has worked on his own synthedit plugin. If he can use synthedit and construct a custom GUI, surely he knows how AT LEAST half of these things work. Beyond that, the cries of RTFM are because the original post is basically saying:

Tell me how everything works.

This is a little beyond the scope of a forum question. If there's something specific and targeted, like how to "sidechain" in FL studio, then it would probably be answered with care, but it's obvious that the OP either doesn't have the manual and an FL studio license with which to learn more via image-line, or is simply to lazy to learn the basic features of his DAW.

Once he does "RTM", and still has questions relating to what the manual doesn't cover, myself and many others would surely be pleased to help!

Then LOL, perhaps RTFM is NOT going too far. Haha.

Type each effect type into youtube and also use wikipedia re watch them a few times.

The Fab Filter youtube vids for compression and limiting are very easy to understand.

Soundtoys PDF manuals are very educational for effects.